Available for Special Order only Ships as soon as product becomes available! Estimated Time: 1 - 2 Weeks Prototype Information:The General Electic P42 locomotive is also known as the "Genesis" locomotive. The P42 is a modern 4200 horsepower passenger locomotive used across the United States and Canada. Amtrak's P42 has replaced the EMD F40PH in revenue service and today they are used throughout the United States. Since their introduction, they have had a number of physical revisions to improve the ease of maintenance and parts replacements, including a bolt-on fiberglass nose panel (replacing the original's solid metal which was difficult to repair or replace) and a new headlight bezel that is more rounded than the previous square versions.Model Features: Perfectly suited to pull Kato's new production of Phase IVb Superliners. Directional headlights and tail lights on both the front and rear of the locomotive, allowing it to operate as both a standard pulling locomotive with double heading capability or a push-pull engine, whether oriented facing forward or back. Illuminated pre-printed numberboards Capable of navigating minimum 370mm (14 3/5") radius curves (R1 radius in Europe), allowing the P42 to go where previous Kato locomotives have never been able to go before - dining room tables, coffee tables, spaces previously reserved exclusively for N scale! Brand new coreless truck-motor drive paired with a super-heavy solid metal body mechanism; doubling the number of motors while increasing the traction potential and weight for new standard of running smoothness and pulling power.

Read more less

#590 Bettendorf - AAR Electrical Pickup Self Centering Caboose Trucks with 33" Smooth Back Wheels - (Leaf Spring) - HO Scale"HGC" Two Piece Fully Equalized Trucks Mounts with a #2 or 2-56 screw. "HGC" or High Gravity Compound, weighs nearly the same as Metal Trucks but with more detail & a 2 piece split bolster design for more efficient truck equalization, reduced axle friction for greater rolling performance. One Pair HO-Scale "HGC" Two Piece Fully EqualizedElectrical PickupTrucks Features:  Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track. Code 110 (.110) 33" Smooth Back Wheels "HGC" Weighs nearly the same as Metal Trucks Superior Rolling Ability Clip on Brake Pads Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Fully Equalized Trucks Smooth tracking Free Rolling Contoured Insulated Axles RP-25 Free Rolling Wheels Electrical Pickup Patent number 7,434,518 B2 Package Includes: (2) Each #590 Bettendorf - AAR Electrical Pickup Self Centering Caboose Truck (Leaf Spring) (assembled) (2) Clip on Brake Pads (2) Electrical Pickup w/wire (2) Each Self Centering Bushing (2) Each #2 Screw The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined.  The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999.  That is one impressive class!  N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes.   In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme.  We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout.  The hopper car models come completely assembled and decorated.   Each 2-pack contains two distinctive cars with different road numbers.    Industry-leading Model Features:    Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail Minimum Operating Radius:  9 inches.

Read more less

On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined.  The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999.  That is one impressive class!  N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes.   In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme.  We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout.  The hopper car models come completely assembled and decorated.   Each 2-pack contains two distinctive cars with different road numbers.    Industry-leading Model Features:    Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail Minimum Operating Radius:  9 inches.

Read more less

On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined.  The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999.  That is one impressive class!  N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes.   In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme.  We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout.  The hopper car models come completely assembled and decorated.   Each 2-pack contains two distinctive cars with different road numbers.    Industry-leading Model Features:    Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail Minimum Operating Radius:  9 inches.

Read more less

On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined.  The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999.  That is one impressive class!  N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes.   In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme.  We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout.  The hopper car models come completely assembled and decorated.   Each 2-pack contains two distinctive cars with different road numbers.    Industry-leading Model Features:    Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail Minimum Operating Radius:  9 inches.

Read more less

On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined.  The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999.  That is one impressive class!  N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes.   In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme.  We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout.  The hopper car models come completely assembled and decorated.   Each 2-pack contains two distinctive cars with different road numbers.    Industry-leading Model Features:    Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail Minimum Operating Radius:  9 inches.

Read more less

On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined.  The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999.  That is one impressive class!  N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes.   In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme.  We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout.  The hopper car models come completely assembled and decorated.   Each 2-pack contains two distinctive cars with different road numbers.    Industry-leading Model Features:    Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail Minimum Operating Radius:  9 inches.

Read more less

On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined.  The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999.  That is one impressive class!  N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes.   In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme.  We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout.  The hopper car models come completely assembled and decorated.   Each 2-pack contains two distinctive cars with different road numbers.    Industry-leading Model Features:    Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail Minimum Operating Radius:  9 inches.

Read more less

On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined.  The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999.  That is one impressive class!  N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes.   In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme.  We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout.  The hopper car models come completely assembled and decorated.   Each 2-pack contains two distinctive cars with different road numbers.    Industry-leading Model Features:    Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail Minimum Operating Radius:  9 inches.

Read more less

On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined.  The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999.  That is one impressive class!  N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes.   In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme.  We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout.  The hopper car models come completely assembled and decorated.   Each 2-pack contains two distinctive cars with different road numbers.    Industry-leading Model Features:    Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail

Read more less