This Light Test Board module replaces the existing connector board and plugs directly into the NixTrainz Decoder Buddy Adapter Board to make programming, testing, and diagnostics work quick and easy.  The test module has LEDs on-board so you can program, test and troubleshoot your installation with ease.   Compatible with: Decoder Buddy Original (1k Ohm, 8 Outputs) Decoder Buddy Version 5 (12 Outputs) Decoder Buddy Mini (1k Ohm Resistors Onboard) Decoder Buddy Mini (Separate Resistors Included)  

Read more less

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the wires from your existing signals to the terminals on the TSMK and plug your Signal Driver Cable in on the plug provided. More Information Item # TSMK Brand Digitrax Warranty No Worries Warranty (read more) MSRP $17.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less

The PWR-56 is a Power Supply that can be used to supply power for your locomotives, turnouts and other accessories. The PWR-56 has 56 Watts of output power! That is enough power to drive 15 or more typical modern HO scale locomotives! Further, each PWR-56 is equipped with Direct Radio, so a RailPro controller can be used to control, setup, and monitor the PWR-56. Also, the PWR-56 can be used as a Direct Radio Repeater. Package Contents: PWR-56 Module PA-2 Power Adapter 110 VAC Power Cable User Manual   Ring Engineering's AccuClean Power technology in TM the PWR-56 maintains a clean stable output voltage Clean that stays within about 3% from no load to full load! Typical model railroad power supplies can have voltage drops as high as 30% at full load. Unlike typical model railroad power supplies, when you need full power, your Ring Engineering PWR-56 will deliver! Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your PWR-56 to transmit and receive information! Because the PWR-56 has Direct Radio, you can control, setup, and monitor your PWR-56 with any RailPro controller, such as the HC-2 with color touch screen. With a RailPro controlling device, you can turn the output to the track on or off, adjust settings, monitor the output power your PWR-56 is delivering, and more! Setting up your RailPro system is easy. To control and setup your PWR-56 simply press the "Find Produce button on a RailPro controller such as the HC-2, then the RailPro Controller will automatically load a picture of your PWR-56! You can take control of your PWR-56 by touching the picture of the PWR-56 on the screen! The PWR-56 has built in Short Circuit Protection with Auto Recovery to protect your trains and equipment in case of a derailment or other rail-to-rail short! Add multiple PWR-56's to your layout to increase the total amount of power for larger layouts.  

Read more less

Maximize control and convenience with the Digitrax UR90X! Our LocoNet Infrared Receiver offers a 100% reliable connection and compatibility with multiple scales. Experience the power of this expertly designed product, utilizing the latest technology for seamless operation. Simplifies hookup, maintenance and troubleshooting of LocoNet. All connections plug-detachable. One RJ12 Throttle Jacks in front panel. IR and NET Indicator LEDs Two RJ12 LocoNet Jacks in rear for connection to other LocoNet devices.Use with 6 conductor telephone cable with RJ12 6-pin connectors and daisychain your LocoNet ports around the layout. “Power sharing” charge Circuitry for throttles connected to six UniversalPanels. (External 12V supply required for this optional DT602/UT6 chargingsource in sleep mode). More Information Item # UR90X Brand Digitrax Scale Multi Scale MSRP $55.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The new ESU PowerPack Mini can be wired to all fourth and fifth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (1 Farad capacity) the unit supplies power to all light and motor functions as well as to the sound module. Subject to the energy consumption of your model it may continue to move for up to three seconds. The PowerPack Mini incorporates an integral charging circuit controlled by the decoder. Therefore it may be connected even during programming. In order to avoid an undue load on the booster in case there are several models in the same booster sector, the charging current is limited. The buffer time can be reduced by means of a CV. This may be useful to assure the correct stopping position ahead of signals showing the “Stop” aspect (red signal). Although it is considerably smaller than its predecessor, the space requirements of the PowerPack Mini of about 15.7 mm x 9.7 mm x 13 mm must be taken into account when installing this unit. A three-pole wire harness connects the PowerPack Mini to the decoder. The wires are already soldered to the PowerPack Mini and must be soldered to the appropriate solder pads of the decoder. More Information Item # 54671 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

This adapter allows you to use our smallest decoder (The TSU-N18) in practically any n-scale model! Bring the TSU-N18's 6 functions plus a narrower profile to your models. The JST-Next18 Adapter features a Next18 socket to simply plug-in your TSU-N18 decoder and solder pads for additional functionality. Dimensions: 16 x 9.5 x 5mm. P.N. 810163. Dimensions: 16 x 9.5 x 5mm Function Outputs: 6 Max Function Current: 100mA (ea. Output) Compatible with:  SoundTraxx 884010 | Tsunami2 TSU-N18 Steam-2 Digital Sound Decoder SoundTraxx 885026 | Tsunami2 TSU-N18 EMD Diesel Digital Sound Decoder SoundTraxx 885027 | Tsunami2 TSU-N18 GE Diesel Digital Sound Decoder SoundTraxx 885028 | Tsunami2 TSU-N18 ALCO Diesel Digital Sound Decoder SoundTraxx 885029 | Tsunami2 TSU-N18 Baldwin & Other Diesel Digital Sound Decoder SoundTraxx 885030 | Tsunami2 TSU-N18 EMD-2 Diesel Digital Sound Decoder SoundTraxx 886007 | Tsunami2 TSU-N18 Electric Digital Sound Decoder

Read more less

This snap-together baffle kit is designed for use with our 20mm round speakers (P.N. 810053).

Read more less

Sunny White LED for adding Hyperlight effects or as bulb replacements. 3mm (0.012") diameter 3.3 Volt

Read more less

The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page. Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps. Compatible with most Android and Apple devices running supported throttle apps Easy Setup and Configuration. A single LNWI works ‘out of the box’, with no additional configuration required. Up to 8 LNWI can be supported per LocoNet Multiple LNWI units automatically resolve SSID with no additional configuration Optional Wi-Fi WPA2 security for layout operations in public. Option switches to fully customize all device settings LocoNet Compatible More Information Item # LNWI Brand Digitrax MSRP $83.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet / Instruction Sheet

Read more less

Cool White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated by the ‘flag’ inside the LED, or by the shorter of the two leads.  Dimensions: 3mm (0.12”) diameterVoltage: 3.3 Volts

Read more less

A PBM can be added to a HO model train locomotive so that if the model train wheels loose connection from the track because of dirty track or other problems, the Power Backup Module will supply power to the Locomotive Module for up to many seconds to keep operating properly without sounds, lights, or even motor stopping! What is special about the RaiPro PBM is that the PBM is an active power backup not a passive one like many other power backups. Many others are basically just super capacitors that the voltage drops exponentially as soon as the power is removed. With other backups, lights continually dim and module performance is effected. Our PBM has onboard microcontroller and other electronics that will output a fixed voltage similar to a good power supply output so lights stay constant while PBM is active and locomotives perform better. Product Specifications: Connection 2-wire Dimensions: 1.27 x 0.66 x 0.32 in DCC Track Voltage: 12.6V – 16V     Approximate Run time lights only: ~18 SecondsApproximate Run time lights and sounds: ~14 SecondsApproximate Run time lights, sounds, and pulling a train:Varies greatly depending on locomotive, speed, load etc. PBM Frequently Asked Questions What is the most important aspect of a power backup module? In our opinion, the most important aspect of a PBM is its ability to power a locomotive pulling a train across dead track. Our PBM works so well that one of our locomotives pulled twelve cars across thirty inches of dead track without stopping while the lights and sounds were on! We tested some other super capacitor only power backup products that only covered a small fraction of the distance and were as large as our PBM! If the most important aspect is powering the locomotive pulling a train, why is there so many others that show or talk about the time the lights stay on? Powering a train can take many times the power then to just have light and/or sounds on because the motor can use much more power than powering the lights and/or sounds. We have seen super capacitor only designs that have real long light on time but when you try to pull a train the results were very poor. One product we tested had many seconds of light and/or sound on time but when pulling a train it died in less than 0.2 seconds! This is why we think many talk about or show light on time because it makes their products look better than they may perform when actually pulling a train. Do I have to use a PBM in all my locomotives for them to run well? NO. If your layout is powered by a RailPro power supply, you have quality locomotives, your layout is properly wired, and you do a reasonable job of keeping your track and locomotive wheels clean, you can have a good running layout without PBMs. So who does Ring Engineering sell PBMs for if some RailPro customers do not really need them? There are many RailPro customers that run on other peoples layouts (like at train clubs) and they cannot control how clean or maintained the track is. There are some RailPro customers that do clean their track regularly but just want extra insurance to be sure they get the best operation possible. Is it ok to use other companies power backup like devices with RailPro locomotive modules? No. Ring Engineering products should only be used as described in their user manuals. The LM user manuals do not say it is ok to connect super capacitors. Using our products in a way not in compliance with our user manuals will void the warranty of the Ring Engineering product and may cause serious problems. There is no public specification on how to design power backup units so there is no guarantee of compatibility. We believe that some regular super capacitor designs have been used with RailPro LM modules and damaged the RailPro modules. If you want power backup you should only use a Ring Engineering PBM with your RailPro locomotive modules. If a power backup has more Farads of super capacitors is it better? Not necessarily. The amount of capacitance (Farads) is only one factor and may not be a real good one when trying to compare one power backup to another. There are other important features to consider besides capacitance. For example a one Farad device can be a lot better than a two farad device. The two farad device may allow lights to run longer but not be able to power a moving train well. There is simply a lot more to it then simply comparing how much capacitance a backup device has built into it. Made In USA

Read more less

Golden White LED for adding Hyperlight effects or as bulb replacements. 3mm (0.012") diameter 3.3 Volt

Read more less