DCC Decoders

The SoundTraxx 885624 is a BLU-PNP8 Blunami digital sound decoder with the EMD-2 sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is a drop-in replacement for the factory AT-style board in many HO diesels, suited to HO to S scale. Features 8 EMD-2 prime movers: EMD 567 12-cylinder (no transition), EMD 567C 16-cylinder non-turbo, EMD 645E 12-cylinder non-turbo, EMD 645E 12-cylinder turbo, EMD 645F 16-cylinder turbo, EMD 645E 20-cylinder turbo, EMD 710G 12-cylinder, EMD 710G 16-cylinder Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885624 Model: BLU-PNP8 Blunami Sound Set: EMD-2 Diesel Scale: HO to S scale Decoder Size: 74 x 17 x 5mm Connection: Drop-in AT-style board replacement Max. Motor Stall Current: 2A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD-2 sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD-2 or plain EMD — which do I want?This is the EMD-2 set: a second collection of less-common EMD prime movers, called out by cylinder count. The plain EMD set covers the more common 567/645/710 variants. Match the list above to your prototype. Will it fit my locomotive?This one measures 74 x 17 x 5mm and connects by drop-in at-style board replacement. Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.

Read more less

The SoundTraxx 885605 is a BLU-2200 Blunami digital sound decoder with the EMD sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is the universal-style Blunami that fits most HO diesels, suited to HO and small S scale. Features 9 EMD prime movers: EMD 567 No Transition, EMD 567 Non-Turbo, EMD 567 Turbo, EMD Dual 567, EMD 645 Non-Turbo, EMD 645 Turbo, EMD Dual 645 Turbo, EMD 710 Turbo, EMD 710 G3C-T2 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885605 Model: BLU-2200 Blunami Sound Set: EMD Diesel Scale: HO and small S scale Decoder Size: 35 x 18 x 6mm Connection: NMRA 9-pin JST harness to hardwire Max. Motor Stall Current: 2A Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD or EMD-2 — which do I want?This is the EMD set: the common 567, 645 and 710 prime movers. The separate EMD-2 set carries a second group of less-common variants with specific cylinder counts. Check your locomotive’s prime mover against the list above before ordering. Will it fit my locomotive?This one measures 35 x 18 x 6mm and connects by nmra 9-pin jst harness to hardwire. Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.

Read more less

The SoundTraxx 885812 is a TSU-21PNEM8 Tsunami2 digital sound decoder with the Baldwin & Other sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the 21-pin MTC plug-in decoder, rated 1A and suited to HO scale and larger. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 12 Baldwin & Other prime movers: Baldwin VO, Baldwin 608NA, Baldwin 608A, Baldwin 606NA, Rio Grande Southern Galloping Goose, Dual Whitcomb, Fairbanks-Morse, GE GTEL UP “Slab Side”, GE GTEL UP “Veranda”, GE GTEL UP “Big Blow” A unit, GE GTEL UP “Big Blow” B unit, Cummins QSK19C x3 GenSet Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885812 Model: TSU-21PNEM8 Tsunami2 Sound Set: Baldwin & Other Diesel Scale: HO scale and larger Decoder Size: 30.5 x 15.5 x 6.5mm Connection: 21-pin NEM (21MTC) plug Max. Motor Stall Current: 1A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Baldwin & Other sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 30.5 x 15.5 x 6.5mm and connects by 21-pin nem (21mtc) plug. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 12 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The TCS WOW101 is a universal WOWSound decoder for HO locomotives with a 9-pin JST plug, or any loco that can't accept a motherboard or WOWKit. It plugs straight into a 9-pin socket or hard-wires in, works with TCS T-Series harnesses, and includes an auxiliary harness for your speaker, CAM, and Keep-Alive connections. This is the Diesel version with TCS's selectable prime-mover sound sets — choose between EMD, Alco, Baldwin/others, and GE engine sounds to match your prototype. An on-board Keep-Alive® keeps it running smoothly across dirty track and dead frogs — no add-on capacitor needed. Pick a matching speaker from our DCC Accessories collection, browse more DCC Decoders, or shop the full Train Control Systems WOWSound lineup. Features CD-quality WOWSound — 16-bit audio at a 44.1 kHz sample rate. Selectable TCS's selectable prime-mover sound sets choose between EMD, Alco, Baldwin/others, and GE engine sounds to match your prototype. Back-EMF load compensation for superior slow-speed control under load. Quiet Drive super-quiet motor control for buzz-free running. Variable Momentum for custom acceleration and deceleration curves. Audio Assist® menu programming — set up sound and CVs right on the track, no computer required. Plugs into a 9-pin JST socket or hard-wires in; compatible with TCS T-Series harnesses. On-board Keep-Alive® for stutter-free operation over dirty track. More Information Brand Train Control Systems (TCS) Item Number 1533 Decoder WOW101-KA Type WOWSound DCC Sound Decoder Sound Diesel Connection 9-pin JST plug or hard-wire (T-Series harness compatible) On-board Keep-Alive Yes Scale HO Scale Condition New FAQ Will this decoder fit my locomotive?The WOW101 suits any HO loco with a 9-pin JST plug or one you can hard-wire. It is compatible with TCS T-Series plug-and-play harnesses for many popular models. Do I need a separate speaker?Yes — this is the decoder only. Add a WOWSpeaker (or any 8 Ω DCC speaker) sized for your locomotive to hear the sound. What is Audio Assist?It's TCS's on-the-fly programming menu that walks you through sound and CV setup using your throttle and the decoder's own spoken prompts — no programming track or computer needed.

Read more less

The SoundTraxx 885008 is a TSU-2200 Tsunami2 digital sound decoder with the Baldwin & Other sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the universal-style decoder that fits most HO diesels, rated 2A and suited to HO to S scale. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 12 Baldwin & Other prime movers: Baldwin VO, Baldwin 608NA, Baldwin 608A, Baldwin 606NA, Rio Grande Southern Galloping Goose, Dual Whitcomb, Fairbanks-Morse, GE GTEL UP “Slab Side”, GE GTEL UP “Veranda”, GE GTEL UP “Big Blow” A unit, GE GTEL UP “Big Blow” B unit, Cummins QSK19C x3 GenSet Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885008 Model: TSU-2200 Tsunami2 Sound Set: Baldwin & Other Diesel Scale: HO to S scale Decoder Size: 35 x 18 x 6mm Connection: Universal-style hardwire with an NMRA 9-pin JST harness Max. Motor Stall Current: 2A Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Baldwin & Other sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 35 x 18 x 6mm and connects by universal-style hardwire with an nmra 9-pin jst harness. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 12 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The Digitrax SDXH187MT is the perfect addition to your HO scale model trains. With its Series 7 Sound Decoder, this product provides realistic and high-quality sound experience. Being an industry leader, Digitrax guarantees superior performance and compatibility for your model trains. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer More Information Item # SDXH187MT Brand Digitrax Scale HO Scale MSRP $65.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The TCS WOW101 is a universal WOWSound decoder for HO locomotives with a 9-pin JST plug, or any loco that can't accept a motherboard or WOWKit. It plugs straight into a 9-pin socket or hard-wires in, works with TCS T-Series harnesses, and includes an auxiliary harness for your speaker, CAM, and Keep-Alive connections. This is the Diesel version with TCS's selectable prime-mover sound sets — choose between EMD, Alco, Baldwin/others, and GE engine sounds to match your prototype. Pick a matching speaker from our DCC Accessories collection, browse more DCC Decoders, or shop the full Train Control Systems WOWSound lineup. Features CD-quality WOWSound — 16-bit audio at a 44.1 kHz sample rate. Selectable TCS's selectable prime-mover sound sets choose between EMD, Alco, Baldwin/others, and GE engine sounds to match your prototype. Back-EMF load compensation for superior slow-speed control under load. Quiet Drive super-quiet motor control for buzz-free running. Variable Momentum for custom acceleration and deceleration curves. Audio Assist® menu programming — set up sound and CVs right on the track, no computer required. Plugs into a 9-pin JST socket or hard-wires in; compatible with TCS T-Series harnesses. More Information Brand Train Control Systems (TCS) Item Number 1530 Decoder WOW101 Type WOWSound DCC Sound Decoder Sound Diesel Connection 9-pin JST plug or hard-wire (T-Series harness compatible) On-board Keep-Alive No Scale HO Scale Condition New FAQ Will this decoder fit my locomotive?The WOW101 suits any HO loco with a 9-pin JST plug or one you can hard-wire. It is compatible with TCS T-Series plug-and-play harnesses for many popular models. Do I need a separate speaker?Yes — this is the decoder only. Add a WOWSpeaker (or any 8 Ω DCC speaker) sized for your locomotive to hear the sound. What is Audio Assist?It's TCS's on-the-fly programming menu that walks you through sound and CV setup using your throttle and the decoder's own spoken prompts — no programming track or computer needed.

Read more less

The SoundTraxx 885842 is a TSU-BH1 Tsunami2 digital sound decoder with the ALCO sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a drop-in board replacement for Bachmann Sound Value diesels, rated 2A and suited to HO scale Bachmann Sound Value diesels. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 9 ALCO prime movers: ALCO 539 Turbo, ALCO 539 Non-Turbo, ALCO 244 Turbo, ALCO 251A i6, ALCO 251C v12, ALCO 251C v12 Super Charged, ALCO 251C v12 Century Series, ALCO 251C v16, ALCO 251C v16 Super Charged Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885842 Model: TSU-BH1 Tsunami2 Sound Set: ALCO Diesel Scale: HO scale Bachmann Sound Value diesels Decoder Size: 97 x 16 x 7.7mm Connection: Drop-in replacement for the Bachmann Sound Value factory board Max. Motor Stall Current: 2A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other ALCO sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 97 x 16 x 7.7mm and connects by a drop-in replacement for the bachmann sound value factory board. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Which locomotives is the BH1 for?It is a drop-in replacement for the factory board in Bachmann Sound Value diesels, including the FA-2, FB-2, S-4, E7-A, F-7, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, RS-3 and SD40-2. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 885006 is a TSU-2200 Tsunami2 digital sound decoder with the GE sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the universal-style decoder that fits most HO diesels, rated 2A and suited to HO to S scale. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 8 GE prime movers: GE FDL-12, GE FDL-16, GE 7FDL-16, GE Dual FDL-16, GE GEVO G12, GE 44-Ton Center Cab Dual Caterpillar, GE Cummins Switcher, GEVO G12 Tier 4 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885006 Model: TSU-2200 Tsunami2 Sound Set: GE Diesel Scale: HO to S scale Decoder Size: 35 x 18 x 6mm Connection: Universal-style hardwire with an NMRA 9-pin JST harness Max. Motor Stall Current: 2A Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other GE sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 35 x 18 x 6mm and connects by universal-style hardwire with an nmra 9-pin jst harness. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 886803 is a TSU-21PNEM8 Tsunami2 digital sound decoder with the Electric sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the 21-pin MTC plug-in decoder, rated 1A and suited to HO scale and larger. Dynamic Digital Exhaust reads the load on the motor and notches the traction motor up and down on its own, so the locomotive sounds like it is working for its train. Features AC traction motor sound with pantograph up/down (interlocked so the loco will not move with the pantograph down), trolley bell, stop-request bell, pneumatic doors and cab chatter Dynamic Digital Exhaust (DDE) matches traction motor sound to the load on the motor automatically Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 886803 Model: TSU-21PNEM8 Tsunami2 Sound Set: Electric Electric Scale: HO scale and larger Decoder Size: 30.5 x 15.5 x 6.5mm Connection: 21-pin NEM (21MTC) plug Max. Motor Stall Current: 1A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Electric sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 30.5 x 15.5 x 6.5mm and connects by 21-pin nem (21mtc) plug. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 885001 is a TSU-1100 Tsunami2 digital sound decoder with the EMD sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a compact universal-style decoder for tight installs, rated 1A and suited to small models with minimal space. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 9 EMD prime movers: EMD 567 No Transition, EMD 567 Non-Turbo, EMD 567 Turbo, EMD Dual 567, EMD 645 Non-Turbo, EMD 645 Turbo, EMD Dual 645 Turbo, EMD 710 Turbo, EMD 710 G3C-T2 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885001 Model: TSU-1100 Tsunami2 Sound Set: EMD Diesel Scale: small models with minimal space Decoder Size: 27 x 10.5 x 5mm Connection: Universal-style hardwire Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 27 x 10.5 x 5mm and connects by universal-style hardwire. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD or EMD-2 — which do I want?This is the EMD set: the common 567, 645 and 710 prime movers. The separate EMD-2 set carries a second group of less-common variants called out by cylinder count. Match the list above to your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

While LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable. The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles. Modes The LokPilot 5 Basic is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center. It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255. The LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted. Functions The LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately. Motor The motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. Operational reliability On request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts. Protection Of course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 59020 Brand ESU LLC Scale HO MSRP $29.90 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less