Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how to do this? The Profi Decoder tester makes it easy for you: simply connect the tester to your command station or the LokProgrammer. It enables you to test any decoder without exposing it to any external factors caused by the locomotive that may influence its performance. Features In order to make things as easy as possible for you, the Profi Decoder Tester is equipped with some useful features. It has all commonly used interface sockets for connecting a decoder for the smaller scale models: Besides a 6-pole NEM 651 socket and the 8-pole NEM 652 socket, it also has an 21MTC interface as per NEM 660, a PluX22 socket as well as a Next18 interface: No matter which type of decoder you have: Simply plug it in – it will fit! And that’s all there is to it! Decoders without any interface can be contacted with individual terminals.  A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output: Thus it is quite easy to check on the low speed performance and the even speed of the decoder. An LED monitor informs you about the functioning of the headlights and back-up lights as well as the function outputs AUX1 through AUX6. For testing LokSound decoders we have integrated a 20 mm speaker. You may choose if the integral speaker should be switched off or if it should have 100 Ohm respectively 16 Ohm – thus the Decoder Tester is perfectly suitable for any ESU decoder generation! Two SUSI plugs facilitate the direct test of optional SUSI modules as well as the connection to another circuit board. The electrical connection to either the command station or the LokProgrammer is facilitated by a removable, 2-pole terminal block (same system as used on the LokProgrammer and the ECoS) or via two solder points. The dimensions of the ESU Decoder Tester are 99 x 74 x 34mm. WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

All you need is power! This is the quickest and easiest way to add lights to any project. Use the individual dimmer controls to regulate light brightness. Add an optional Auxiliary Switch for convenient operation. Powering Your Light System- You will need one Just Plug Power Supply (JP5770 US, JP5771 Euro, JP5772 UK or JP5773 Aus/NZ) to power up to 50 lights on your light system, or if you want to power your system from a train power pack, purchase Connecting Cables (JP5760). RoHS compliant

Read more less

The TSU-1100 is one of SoundTraxx’s smallest sound decoders, yet is packed with a plethora of high-performance features! You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. SoundTraxx also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This micro 1-amp, universal-style format is ideal for small models with minimal space. It includes an optional capacitor or can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Steam-2 Dimensions: 27 x 10.5 x 5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

The Circuitron Tortoise Switch Machine (6 Pack) Motor stalls at each end of throw No cutoff contact necessary Precision engineered gear-drive mechanism Enclosed construction Constant tension on switch points Ultra-Simple Mounting! No additional brackets or linkage necessary Fulcrum adjusts for use in all scales - Z to G. Prototypical Slow Motion Action! 3 seconds to complete the throw Convenient Auxiliary Contacts! 2 sets SPDT provided for powering the frogs or signals

Read more less

Squeaky’s Trains – HO Scale – “Jersey” Concrete Traffic Barriers Our “Jersey” Temporary Concrete Barriers are HO scale accurate, 100% exclusive and only available from Squeaky’s Trains. Each and every barrier goes through an inspection to insure the best quality possible. Condition: New Scale: HO Scale Accurate Sizes Length: See Size Options Height:  0.35″ / 9.0mm Width: 0.31″ / 8.0mm Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Finish/Color: Unpainted, gray. Notes: Vehicles, coin, or other props not included.  Looking to purchase in bulk? Contact us for pricing.

Read more less

These Wooden Picnic Tables are uniquely created by Squeaky’s Trains & Things. 4 Pack 3D printed with high quality materials. Hand painted, each tables is unique. HO Scale Size: 6ft (1:87)

Read more less

You haven’t heard WOWSound until you’ve heard it through our 28mm High Bass 4W WOWSpeaker! This speaker handles an unprecedented 4 watts of power, and showcases a mighty bass reflex that packs a big sonic punch. Welcome to the new standard for sound in model trains – pick one up today and prepare to be blown away! This speaker is 28mm (1.1″) diameter and 13.5mm (0.53″) thick which includes a rubberized mounting gasket. The mounting gasket allows for unrestricted movement of the cone, preventing distortion or physical damage! Note: Product listing is for 1x speaker. Additional images provided for clarity. Dimensions: 1.1″ diameter x 0.53″ or 28mm diameter x 13.5mm Sound Pressure Level: 84 ± 3.0 dB (A), at 0.63 V, 0.1 m, Average 500,1,000, 2,000, 4,000 (Hz ), at 25°C Effective Frequency Band: 250 Hz. to 20 kHz. Power Rating: 3W (Typical) 4W (Peak) DC Impedance: 4 Ω ; ± 15%, at 1,000 Hz., 1.0 V

Read more less

2 lights with 24" (60.9 cm) cable/pkg - 25mA each

Read more less

Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin “Quick Plug” to improve performance over dirty track and switches.

Read more less

Put new life in your HO Scale layout with these ready-to-use SceneMaster accessories featuring: Great detail for campgrounds, scouting events, back yard scenes and more Includes 4 small and 2 large tents Finished in green Measures: Large - 1-1/8 x 1-3/8 x 1" or 2.8 x 3.4 x 2.5cm Small - 3/4 x 1 x 1/2" or 1.9 x 2.5 x 1.27cm

Read more less

The HC-3-SUN with an Extra Bright Screen for use in outdoor environments and sunlight, is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features. Product Specifications: Dimensions: 6.1 x 3.4 x 1.5 in   Simply touch the screen to take control of a locomotive or accessory, adjust settings and much more!Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your HC-3 to transmit and receive information!Setting up your RailPro system is easy. When you buy new RailPro Ready products, or new RailPro modules for locomotives and accessories, simply press the “Find Product” button and the HC-3 will automatically load a picture of the product. You can take control of the product by touching the picture of the product!With a couple touches on the screen, you can link multiple locomotives together for more pulling power! With one more touch, you can unlink the locomotives. Our Direct Radio technology allows the locomotives to communicate together to ensure each locomotive pulls its share of the load.Multiple HC-3’s can be used at the same time to allow additional family and friends to enjoy your model layout! Also, multiple locomotives and other accessories can be used simultaneously for complete model layout control!The HC-3 comes complete with built in rechargeable batteries. The HC-3 is equipped with USB port to connect to a PC. You can go to Ring Engineering’s Internet site and download new pictures, sounds, and even new programs to add more functionality to your RailPro system. You do not need a computer to use the HC-3, but this can prove to be a very useful feature.

Read more less