Out of Stock

288 products


  • ESU 53900 | DCC Decoder Tester - Cube Speaker & LEDs

    ESU LLC ESU 53900 | DCC Decoder Tester - Cube Speaker & LEDs | Multi Scale

    2 reviews

    Out of stock

    Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how to do this? The Profi Decoder tester makes it easy for you: simply connect the tester to your command station or the LokProgrammer. It enables you to test any decoder without exposing it to any external factors caused by the locomotive that may influence its performance. Features In order to make things as easy as possible for you, the Profi Decoder Tester is equipped with some useful features. It has all commonly used interface sockets for connecting a decoder for the smaller scale models: Besides a 6-pole NEM 651 socket and the 8-pole NEM 652 socket, it also has an 21MTC interface as per NEM 660, a PluX22 socket as well as a Next18 interface: No matter which type of decoder you have: Simply plug it in ā€“ it will fit! And thatā€™s all there is to it! Decoders without any interface can be contacted with individual terminals.Ā  A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output: Thus it is quite easy to check on the low speed performance and the even speed of the decoder. An LED monitor informs you about the functioning of the headlights and back-up lights as well as the function outputs AUX1 through AUX6. For testing LokSound decoders we have integrated a 20 mm speaker. You may choose if the integral speaker should be switched off or if it should have 100 Ohm respectively 16 Ohm ā€“ thus the Decoder Tester is perfectly suitable for any ESU decoder generation! Two SUSI plugs facilitate the direct test of optional SUSI modules as well as the connection to another circuit board. The electrical connection to either the command station or the LokProgrammer is facilitated by a removable, 2-pole terminal block (same system as used on the LokProgrammer and the ECoS) or via two solder points. The dimensions of the ESU Decoder Tester are 99 x 74 x 34mm. WARNING:Ā This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go toĀ www.P65Warnings.ca.gov

    Out of stock

    $42.79

  • Sale Woodland Scenics 644 | Static-TacĀ® | Multi Scale Woodland Scenics 644 | Static-TacĀ® | Multi Scale

    Woodland Scenics Woodland Scenics 644 | Static-TacĀ® | Multi Scale

    2 reviews

    Out of stock

    Static-Tac is specially formulated and has the right viscosity for adhering Static Grass and Briar Patch. It comes in a bottle with a graduated tip that works for large or small areas. Static-Tac is an easy-to-spread adhesive that dries to a clear matte finish for realistic results.

    Out of stock

    $8.39$7.55

  • Sale Woodland Scenics 1211 | Water System - Realistic Water | Multi Scale Woodland Scenics 1211 | Water System - Realistic Water | Multi Scale

    Woodland Scenics Woodland Scenics 1211 | Water System - Realistic Water | Multi Scale

    2 reviews

    Out of stock

    Use to model still or slow-moving water, such as ponds, rivers, lakes and more. Pour directly from the bottle. Realistic Water is self-leveling, water soluble, wonā€™t crack and has minimal shrinkage. Surface dries firm and clear in approximately 24 hours, depending on humidity conditions. Non-toxic. Seal water area with Plaster Cloth and use only Woodland ScenicsĀ®Ā Earth Colorsā„¢Ā Liquid Pigment, Water Undercoatā„¢Ā or 100% acrylic paint when preparing your water feature. One bottle covers an area 17" (43.1 cm) in diameter if poured to a depth of 1/8" (0.31 cm). 16 fl oz (473 mL)

    Out of stock

    $20.49$18.44

  • Ring Engineering CI-1 | RailPro Computer Interface Module

    Ring Engineering Ring Engineering CI-1 | RailPro Computer Interface Module

    1 review

    Out of stock

    Plug this USB module into your PC (Personal Computer) to add Direct Radio to your computer so you can control and setup RailPro products like the RailPro locomotive modules!You can use a CI-1 and a PC to get started with RailPro for a lower cost! You can buy a real RailPro handheld controller at a later time.PC Requirements: Windows 10, Windows 8, Windows 7, and Vista. Product Specifications: Interface: USB-A Dimensions: 1.87 x 0.78 x 0.34 in Ā  DownloadĀ the CI-1 Software Here! Ā 

    Out of stock

    $31.99

  • Ring Engineering HC-3-SUN | (Outdoor Use) RailPro Wireless Handheld Controller with BRIGHT Color Touchscreen

    Ring Engineering Ring Engineering HC-3-SUN | (Outdoor Use) RailPro Wireless Handheld Controller with BRIGHT Color Touchscreen

    1 review

    Out of stock

    The HC-3-SUN with an Extra Bright Screen for use in outdoor environments and sunlight, is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features. Product Specifications: Dimensions: 6.1 x 3.4 x 1.5 in Ā  Simply touch the screen to take control of a locomotive or accessory, adjust settings and much more!Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your HC-3 to transmit and receive information!Setting up your RailPro system is easy. When you buy new RailPro Ready products, or new RailPro modules for locomotives and accessories, simply press the ā€œFind Productā€ button and the HC-3 will automatically load a picture of the product. You can take control of the product by touching the picture of the product!With a couple touches on the screen, you can link multiple locomotives together for more pulling power! With one more touch, you can unlink the locomotives. Our Direct Radio technology allows the locomotives to communicate together to ensure each locomotive pulls its share of the load.Multiple HC-3ā€™s can be used at the same time to allow additional family and friends to enjoy your model layout! Also, multiple locomotives and other accessories can be used simultaneously for complete model layout control!The HC-3 comes complete with built in rechargeable batteries.Ā The HC-3 is equipped with USB port to connect to a PC. You can go to Ring Engineeringā€™s Internet site and download new pictures, sounds, and even new programs to add more functionality to your RailPro system. You do not need a computer to use the HC-3, but this can prove to be a very useful feature.

    Out of stock

    $263.99

  • Woodland Scenics 640 | Model-Vac | Multi Scale Woodland Scenics 640 | Model-Vac | Multi Scale

    Woodland Scenics Woodland Scenics 640 | Model-Vac | Multi Scale

    2 reviews

    Out of stock

    The Model-Vac is the perfect strength for picking up loose landscaping material but still leaves glued items behind. This cordless modeling vacuum features an ergonomic design and can access small areas. The Model-Vac is easy to empty and does not cause damage to excess material so it can be used again. Batteries not included.

    Out of stock

    $19.98

  • SoundTraxx 852002 | DCC Mobile Decoder MC2H104AT | HO Scale

    SoundTraxx SoundTraxx 852002 | DCC Mobile Decoder MC2H104AT | HO Scale

    2 reviews

    Out of stock

    HO-scale, 4-function decoder that measures 74 x 17 x 3mm designed to replace the existing manufacturer light board in Atlas HO diesel models, some InterMountain Railway models, and those using a similar physical design. This decoder will operate in both DC and DCC. Dimensions: 74 x 17 x 3mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 DCC Track Voltage: 21 Volts Maximum

    Out of stock

    $23.16

  • Kadee 206 | Insulated Muti-Purpose Coupler Height Gauge | HO Scale Kadee 206 | Insulated Muti-Purpose Coupler Height Gauge | HO Scale

    Kadee Kadee 206 | Insulated Muti-Purpose Coupler Height Gauge | HO Scale

    1 review

    Out of stock

    #206 Insulated Muti-Purpose Coupler Height Gauge - HO ScaleIncludes the #148 WhiskerĀ® Coupler & #158 Scale WhiskerĀ® Coupler. - Kit. EASY TO ASSEMBLE & USE A must have tool for gauging mounting height, correct coupler height, trip pin, and permanent uncoupler heights for achieving trouble free coupler performance. Also has a built in HO track gauge. "Takes the guess work out" Four tools in one.1. Provides instant visual reference of proper coupler height.2. Accurately measures proper trip pin height above rail.3. Built-in track gauge. (N.M.R.A. Standard)4. Movable dowel tests KadeeĀ® Magne-MaticĀ® Uncoupler height and registers the needed adjustments.5) Provides instant visual reference of proper body mounting height.Track not included Package Includes: (1) each #148 WhiskerĀ® Coupler (1) each #158 WhiskerĀ® Coupler (1) each #206 Lid (1) each #206 Dowel (1) each #206 Height Gauge Base (10) each .015 Red Fiber Washers (2) each #622 Knuckle Springs (2) each #625 Knuckle Springs (1) each 2 x 1/4" Screw

    Out of stock

    $5.69

  • Kadee 11 | Bulk Pack - 20 pair #5 (NO.5Ā®) Metal Couplers - Medium (9/32") Centerset Shank | HO Scale Kadee 11 | Bulk Pack - 20 pair #5 (NO.5Ā®) Metal Couplers - Medium (9/32") Centerset Shank | HO Scale

    Kadee Kadee 11 | Bulk Pack - 20 pair #5 (NO.5Ā®) Metal Couplers - Medium (9/32") Centerset Shank | HO Scale

    4 reviews

    Out of stock

    This industry leading coupler features an all metal standard coupler, and #634 standard centering spring. The NO.5Ā® Magne-MaticĀ® Metal Coupler may be mounted with the #213, #232, #234, #242 Gearboxes (not included) or with other manufacturers cast-on coupler pockets. The 148 WhiskerĀ® Coupler is equivalent to the NO.5Ā® Metal Coupler. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #28 coupler. HO-Scale Package Includes: (20) Pair NO.5Ā® Metal Couplers - Medium Centerset Shank (20) Pair #634 Centering Spring NO.5Ā® Style Extra #622 Knuckle Springs NO.5Ā® Metal Coupler Features: Material Ā -Ā Ā  Metal Shank Length Ā -Ā Ā  Medium (9/32") (center hole to back of coupler head) Coupler Offset Ā -Ā Ā  Centerset Knuckle Spring Ā -Ā Ā  #622 Centering System Ā -Ā Ā  Standard Shank Centering Spring Ā -Ā Ā  #634 Centering Spring NO.5Ā® Style Head Ā -Ā Ā  Standard Head Works In Place of Ā -Ā Ā  #58, #28, #118, #119, #148, #158, most medium centerset "clone" couplers Works With Ā -Ā Ā  #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #232 Plastic Draft Gearboxes & Lids (Not Included)Features: Material Ā -Ā Ā  Insulated Plastic Dimensions Ā -Ā Ā  29/64"L x 19/64"W x 7/64"H Works With Ā -Ā Ā  NO.5Ā®, #58, 20-Series and all WhiskerĀ® Couplers Mounting Specifications: Mounting Height Ā -Ā Ā  29/64" Centerline Ā -Ā Ā  25/64" Trip Pin Height Ā -Ā Ā  1/32" Center Hole Ā -Ā Ā Ā 2-56 Insulated ScrewsĀ are the most commonly used. (Screw length will vary) Side Holes Ā -Ā Ā Ā 0-48 Self-TappingĀ orĀ 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206Ā Insulated Muti-Purpose Coupler Height Gauge #231Ā Greas-em Dry Graphite Lubricant #237Ā Coupler Trip Pin Pliers #240Ā Double Headed Pin Vise #241Ā Dual Tool Manual Uncoupling Tool and Spring Pick #246Ā Tap (2-56) and Drills (#50 and #43) #780Ā Tap (0-80) and Drills (#55 and #52)

    Out of stock

    $33.98

  • Ring Engineering LM-3S | RailPro HO Scale Locomotive Module with Sound

    Ring Engineering Ring Engineering LM-3S | RailPro HO Scale Locomotive Module with Sound

    1 review

    Out of stock

    The LM-3S is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3S is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs and sounds! The LM-3S has ā€œDirect Radioā€ (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3S module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio!The LM-3S is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V ā€“ 18V Light Outputs 6 Ā  The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

    Out of stock

    $79.99

  • SoundTraxx 810158 | CurrentKeeper 2-Pin Wiring Harness

    SoundTraxx SoundTraxx 810158 | CurrentKeeper 2-Pin Wiring Harness

    1 review

    Out of stock

    Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin ā€œQuick Plugā€ to improve performance over dirty track and switches.

    Out of stock

    $7.16

  • Woodland Scenics 5755 | Just Plug Lighting System | Red LED Flashing Nano Lights 30mA (2) Woodland Scenics 5755 | Just Plug Lighting System | Red LED Flashing Nano Lights 30mA (2)

    Woodland Scenics Woodland Scenics 5755 | Just Plug Lighting System | Red LED Flashing Nano Lights 30mA (2)

    2 reviews

    Out of stock

    Red LED Flashing Nano Lights 30mA Includes 24" cables 2 lights per package Ready to plug into Light Hub (sold separately) INSTRUCTIONS: Align locking tabs on Light Plug with front of Light Hub (JP5700, JP5701) and insert into LIGHT Port until locking tabs click into place. Glue or tape Light in place, as required. Pink plastic band (1/2") on cable identifies Red Flashing light.

    Out of stock

    $9.79

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account