The RX4 is a 4 zone transponder detector for use with Digitrax occupancy detection systems.  The RX4 enables you to not only see what blocks are occupied but also identifies what is there. RX4 Features: Know the layout zone location of transponder-equipped locos and rolling rolling stock Each RX4 handles 4 transponding zones Low current pulses wont interfere with DCC decoders or other track signals Can be used in conjunction with other means of occupancy detection to customize your layout's feedback system Works with most DCC compatible systems Can be adapted to work with other command control systems as well Location and identification information is updated continuously on LocoNet Location Information can be configured to be displayed on a track diagram No modification of existing equipment required, just add the transponding components and you're ready to go. More features than any other method of "bi-directional" communication. Note: RX4s must be used in conjunction with a Digitrax BDL16 series occupancy detector to function.  More Information Item # RX4 Brand Digitrax Scale N/A MSRP $54.00  TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet, BDL168/RX4 Worksheet, Transponding with BDL168 & RX4 App Note, Specification Sheet

Read more less

LocoNet Universal Panel and 3 Amp Z Scale Voltage Reducer 6 LocoNet Jacks for use with all scales Reduces track voltage by 4 or 6 volts at 3 amps for safer Z Scale locomotive opreration with Digitrax equipment More Information Item # UP6Z  Brand Digitrax Scale Z MSRP $31.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet, Specification Sheet

Read more less

Custom Decoder Installed - Brand New Locomotive: SoundTraxx 885609 BLU-21PNEM8 Blunami EMD Diesel Sound Decoder Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With SoundTraxx 885609 BLU-21PNEM8 Blunami Sound Decoder Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers The Blunami BLU-21PNEM8The BLU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Blunami has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos, and more!

Read more less

Bowser HO Scale X31 Round-Roof Boxcars are based on the distinctive cars built beginning in 1934 by the Pennsylvania Railroad at its Altoona, Pennsylvania, shops and under contract by other builders. The signature cars featured a rounded-edge roof designed to maximize interior space in the cars. Several roof and door variations were constructed and the Bowser models are available in several variations. Pennsy operated thousands, and many also went to other railroads affiliated with PRR as well as those which purchased them used. They operated into the 1970s, and later in work train service, so they'll look great in steam or classic diesel-era freight consists on your railroad. This ready-to-run model features a detailed injection-molded body with accurate decoration, body-mounted knuckle couplers and appropriate trucks with metal wheels for operation on Code 70 or larger rail. More Information Brand Bowser Type X31 B1 Double-Door Round Flush Roof Boxcar Scale HO Road Name Norfolk & Western Road Number 46452 TCA Grading C-10 Mint - Brand New Availability In-Stock / Clearance MSRP $29.95 Item # 43313 Made In China WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Read more less

Bowser HO Scale X31 Round-Roof Boxcars are based on the distinctive cars built beginning in 1934 by the Pennsylvania Railroad at its Altoona, Pennsylvania, shops and under contract by other builders. The signature cars featured a rounded-edge roof designed to maximize interior space in the cars. Several roof and door variations were constructed and the Bowser models are available in several variations. Pennsy operated thousands, and many also went to other railroads affiliated with PRR as well as those which purchased them used. They operated into the 1970s, and later in work train service, so they'll look great in steam or classic diesel-era freight consists on your railroad. This ready-to-run model features a detailed injection-molded body with accurate decoration, body-mounted knuckle couplers and appropriate trucks with metal wheels for operation on Code 70 or larger rail.  More Information Brand Bowser Type X31 B2 Double-Door Round Flush Roof Boxcar Scale HO Road Name Norfolk & Western Road Number 49210  TCA Grading C-10 Mint - Brand New Availability In-Stock / Clearance MSRP $29.95 Item # 43310 Made In China WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Read more less

PLEASE NOTE: A physical delivery address is required. PO Boxes cannot be used. The Estes A8-3 Rocket Engine is a single stage engine designed for model rocket flights. Estes 1598 contains an18 mm standard engine designed for flights in rockets weighing 3 ounces or less, including engine. Each package includes: 3 A8-3 Engines 4 starters 4 starter plugs Estes 1598 is best for beginner-build level rocket kits that uses18 mm standard engines such as: 1225 Alpha 1256 Alpha III 1261 Baby Bertha 1292 Wizard 1706 Orbis 3D ATTENTION: Residents of California, New Jersey, Rhode Island and North Dakota please review the Terms of Sale for state specific restrictions or Click Here for State Specific Restrictions. More Information Brand Estes Rockets  Engine A8-3 Total Impulse 2.50 N-sec Time Delay 3 Seconds Max Lift Weight 3.0 oz (85 g) Max Thrust 10.70 Newtons (2.4 lbs) Thrust Duration 0.80 Seconds Dimensions Length: 2.8 in. (7 cm)Diameter: 18 mm Weight .55 oz. (15.6 g) Propellant Weight 0.14 oz (4.1 g) TCA Grading C-10 Mint - Brand New Availability In-Stock / Restockable MSRP $11.29 Item # 001598 Made In United States of America  

Read more less

PLEASE NOTE: A physical delivery address is required. PO Boxes cannot be used. The Estes B4-4 Rocket Engine 3-Pack is an 18 mm, single-staged engine designed for model rocket flights. This engine is a standard engine designed for flights in rockets weighing less than 3.5 ounces, including the engine. Each 3-pack package includes: 3 engines 4 starters 4 plugs 1602 B4-4 Rocket Engine 3-Pack is compatible with majority of Estes rocket kits including:  1225 Alpha 1292 Wizard 1261 Baby Bertha 1946 Boosted Bertha 1948 Big Bertha 1949 Viking 2008 Generic 2X 2021 Cadet 2056 US Army Patriot 2092 Mongoose 2169 Dragonite 2178 Hi-Flier 2452 Athena 2483 Phantom Blue 7000 Bull Pup 12D 7220 Crossfire ISX 7245 Comanche-3 7259 Nike-X 7281 Corvetter 7284 Starship 7291 Space Corps Centurion ATTENTION: Residents of California, New Jersey, Rhode Island and North Dakota please review the Terms of Sale for state specific restrictions or Click Here for State Specific Restrictions. More Information Brand Estes Rockets  Engine B4-4 Total Impulse 5.00 N-sec Time Delay 4 Seconds Max Lift Weight 3.5 oz (99 g) Max Thrust 13.20 Newtons (3.0 lbs) Thrust Duration 1.10 Seconds Dimensions Length: 2.8 in. (7 cm)Diameter: 18 mm Weight .68 oz. (19.3 g) Propellant Weight 0.27 oz (7.6 g) TCA Grading C-10 Mint - Brand New Availability In-Stock / Restockable MSRP $11.99 Item # 001602  

Read more less

PLEASE NOTE: A physical delivery address is required. PO Boxes cannot be used. The Estes B6-4 Rocket Engine 3-Pack is a medium engine pack that delivers high altitude flights. As a standard 18mm single-stage engine, this is designed for larger, heavier rockets. Estes 1606 B6-4 Engine Bulk Pack package includes: 3 B6-4 Engines 4 starters  4 starter plugs B6-4 Rocket Engine 3-Pack is best used in the rocket kits below: 0651 Der Red Max 1225 Alpha 1256 Alpha III 1261 Baby Bertha 1292 Wizard 1329 Multi-Roc 1946 Boosted Bertha 1948 Big Bertha 1949 Viking 2008 Generic E2X 2021 Cadet 2056 US Army Patriot 2092 Mongoose 2113 Starbase 2126 Tech-Pak ATTENTION: Residents of California, New Jersey, Rhode Island and North Dakota please review the Terms of Sale for state specific restrictions or Click Here for State Specific Restrictions. More Information Brand Estes Rockets  Engine B6-4 Total Impulse 5.00 N-sec Time Delay 4 Seconds Max Lift Weight 4.0 oz (113 g) Max Thrust 12.10 Newtons (2.7 lbs) Thrust Duration 0.80 Seconds Dimensions Length: 2.8 in. (7 cm)Diameter: 18 mm Weight .63 oz. (17.9 g) Propellant Weight 0.23 oz (6.5 g) TCA Grading C-10 Mint - Brand New Availability In-Stock / Restockable MSRP $11.99 Item # 001606  

Read more less

PLEASE NOTE: A physical delivery address is required. PO Boxes cannot be used. The Estes C6-5 engine is a single stage engine designed for model rocket flight. This engine is a standard engine designed for flights in rockets weighing less than 4 ounces, including the engine. Estes 1614 Pack package includes: 3 C6-5 Engines 4 starters  4 starter plugs ATTENTION: Residents of California, New Jersey, Rhode Island and North Dakota please review the Terms of Sale for state specific restrictions or Click Here for State Specific Restrictions. More Information Brand Estes Rockets  Engine B6-4 Total Impulse 10.00 N-sec Time Delay 5 Seconds Max Lift Weight 4.0 oz (113 g) Max Thrust 15.30 Newtons (3.4 lbs) Thrust Duration 1.60 Seconds Dimensions Length: 2.8 in. (7 cm)Diameter: 18 mm Weight .85 oz. (24.1 g) Propellant Weight 0.43 oz (12.2 g) TCA Grading C-10 Mint - Brand New Availability In-Stock / Restockable MSRP $12.99 Item # 001614  

Read more less

Printed two color design. Preassembled 15 in. (38 cm) Parachute. This 15 in. (38 cm) parachute is preassembled and ready to use on model rockets that require a 15 in. parachute. The perfect size when an 18 in. parachute is too big and a 12 in. parachute is too small. More Information Brand Estes Rockets  TCA Grading C-10 Mint - Brand New Availability In-Stock / Restockable MSRP $6.49 Item # 002265  

Read more less