From coach and freight yards to primary power for shortlines, the WalthersMainline SW7 is a perfect choice for your HO layout! Delivering 1200-horsepower from an updated 567A prime mover, the prototypes proved popular with both railroads and industrial lines, with nearly 500 produced in just two years from 1949 to 1951, with several still in service, each layout-ready model is packed with features including: One time run of these roadnumbers, order now - limited quantity available Used by dozens of railroads and industrial lines for switching, local and branch line service with several preserved today! - Phase One body as appropriate with arched front cab windows and louvered radiator cover for units built from 1949 to 1950 - Phase Two body as appropriate with straight front cab windows and wire grille radiator cover for units built from 1950 to 1951 - Dual tall conical exhaust stacks - Large front radiator grille - Single straight hood to cab transition - 6 louvered side doors with letterboard gap - Factory-installed grab irons on hood and cab - With or without footboards as appropriate - 4 styles of headlights to match prototype practice as appropriate: * Original large single * Retrofit horizontal dual * Retrofit dual vertical * Dual sealed beam Same powerful drive as WalthersProto(R) locos featuring: - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die cast metal chassis - Constant and directional LED headlights Next18 DCC Plug Correct size RP-25 metal wheels Proto MAX(TM) metal knuckle couplers
$127.48
Moving large HO loads will be easy with these WalthersMainline 68' Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad owners, features of the models include: One time run of these road numbers, order now - limited quantity available! Based on Bethlehem BSH71A Cars Prototypes introduced in 1979-80 and still built today Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads Detailed nailable "steel" floor "Steel" bulkhead sheets Detailed brake equipment Die-cast metal underframe for outstanding performance loaded or empty 100-ton trucks with correct 36" turned metal RP-25 wheels Proto MAX metal knuckle couplers PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24" is suggested.
$29.73
Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output
$186.98
Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line & regional service First SD60M safety cab with three-piece windshield Open grating on steps 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers
$144.48
Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line & regional service First SD60M safety cab with three-piece windshield Open grating on steps 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers
$144.48
$0.00 Pre-Order | Estimated delivery Summer 2023 Pre-Order Due Date: February 27th, 2023 Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line & regional service First SD60M safety cab with three-piece windshield Open grating on steps 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers
$144.48
Bring the power of today's railroading to your HO layout with the WalthersMainline GE ES44 Evolution Series GEVO diesels. Introduced in 2003 to comply with tougher emission standards, and more popularly known among railfans and modelers as GEVOs, these big engines have quickly become one of the most popular locos worldwide. Designated as the ES44 (Evolution Series, 4,400 horsepower), prototype variations in North American service include locos with DC or AC traction motors and buyers have also specified center idler axles, as well as high adhesion or steerable trucks. WalthersMainline GE ES44 Evolution Series GEVO diesels feature: One time run of these roadnumbers, order now - limited quantity available The most popular prototype diesel in North America Thousands in service from 2003 to the present ESU Sound for DCC and DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28, 128 speed steps Dual mode DC and DCC 4 air horns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Multiple realistic lighting effects 21-pin DCC plug 2- or 4-vent dynamic brake vent as appropriate Easily handles 18" radius curves (22" or larger recommended) Six powered axles per unit LED Lighting includes: Correct headlight position per prototype Working front ditch lights Three truck styles to match prototypes: Standard high-adhesion Steerable (nonworking) C4 A1A center idler axle Same powerful drive as WalthersProto® locos featuring: Five-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant and directional LED lights Correct profile radiator grilles and rooftop walkway surface details Molded drill starter points for grab irons - easily added with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = 0 - Nathan K5LH (default) CV163 = 1 - Nathan K5HLL CV163 = 2 - Nathan K5H CV163 = 3 - Nathan K5LLA Bells: CV164 = 0 - Graham White E-Bell (default) CV164 = 1 - GE Steel Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output
$186.98
Bring the power of today's railroading to your HO layout with the WalthersMainline General Electric Evolution series diesels. Introduced in 2005 to comply with tougher emission standards, and more known among railfans and modelers as GEVOs, these big engines have quickly become one of the most popular locos worldwide. Designated as the ES44 (Evolution Series, 4,400 horsepower), prototype variations in North American service include locos with DC or AC traction motors and buyers have also specified center idler axles, as well as high adhesion or steerable trucks. Features of the models include: Limited edition - one time run of these roadnumbers! Model today's railroading at WalthersMainline prices The most popular prototype diesel in North America Thousands in service from 2005 to the present Correct profile radiator grilles & roof-top walkway surface details Easily handles 18" radius curves (22" or larger recommended) Six powered axles per unit LED Lighting includes: High or low headlight per prototype Working front ditch lights Three truck styles to match prototypes: Standard high-adhesion Steerable C4 A1A center idler axle Fully assembled Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant and directional lights Add grab irons to your model with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Model features low headlight, C4 A1A trucks and 2-vent dynamic brake details.
$144.48
Bring the power of today's railroading to your HO layout with the WalthersMainline General Electric Evolution series diesels. Introduced in 2005 to comply with tougher emission standards, and more known among railfans and modelers as GEVOs, these big engines have quickly become one of the most popular locos worldwide. Designated as the ES44 (Evolution Series, 4,400 horsepower), prototype variations in North American service include locos with DC or AC traction motors and buyers have also specified center idler axles, as well as high adhesion or steerable trucks. Features of the models include: Limited edition - one time run of these roadnumbers! Model today's railroading at WalthersMainline prices The most popular prototype diesel in North America Thousands in service from 2005 to the present Correct profile radiator grilles & roof-top walkway surface details Easily handles 18" radius curves (22" or larger recommended) Six powered axles per unit LED Lighting includes: High or low headlight per prototype Working front ditch lights Three truck styles to match prototypes: Standard high-adhesion Steerable C4 A1A center idler axle Fully assembled Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant and directional lights Add grab irons to your model with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Model features low headlight, C4 A1A trucks and 2-vent dynamic brake details. Related suggestions: WalthersMainline 910-9867 HO EMD SD70ACe - DC - Canadian National #8015
$144.48
