Locomotives

WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell

Read more less

WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, order now - limited quantity available Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector ESU Sound for DCC and DC layouts featuring: - 4 function outputs with brightness control by CV- Fully DCC compatible- 14, 28, 128 speed steps- Dual mode DC and DCC- 4 air horns changeable by CVs- 2 bells changeable by CVs- Full 8-notch prime mover sounds- Compressor- Dynamic brake Same powerful drive as WalthersProto(R) locos featuring - Five-pole skew-wound motor- 14:1 gear ratio- Helical-cut gears for quiet operation and easy multiple unit operation- All-wheel drive and electrical pickup- Heavy die-cast metal chassis- Constant and directional LED lights PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:Horns: CV163 = 0 - Nathan K5LH (default)CV163 = 1 - Nathan K5HLLCV163 = 2 - Nathan K5HCV163 = 3 - Nathan K5LLABells: CV164 = 0 - Graham White E-Bell (default)CV164 = 1 - GE Steel Bell

Read more less

Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, order now - limited quantity available Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector Same powerful drive as WalthersProto(R) locos featuring: - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die-cast metal chassis - Constant and directional LED lights

Read more less

Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, order now - limited quantity available Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector Same powerful drive as WalthersProto(R) locos featuring: - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die-cast metal chassis - Constant and directional LED lights

Read more less

From coach and freight yards to primary power for shortlines, the WalthersMainline SW7 is a perfect choice for your HO layout! Delivering 1200-horsepower from an updated 567A prime mover, the prototypes proved popular with both railroads and industrial lines, with nearly 500 produced in just two years from 1949 to 1951, with several still in service, each layout-ready model is packed with features including: One time run of these roadnumbers, order now - limited quantity available Used by dozens of railroads and industrial lines for switching, local and branch line service with several preserved today! - Phase One body as appropriate with arched front cab windows and louvered radiator cover for units built from 1949 to 1950 - Phase Two body as appropriate with straight front cab windows and wire grille radiator cover for units built from 1950 to 1951 - Dual tall conical exhaust stacks - Large front radiator grille - Single straight hood to cab transition - 6 louvered side doors with letterboard gap - Factory-installed grab irons on hood and cab - With or without footboards as appropriate - 4 styles of headlights to match prototype practice as appropriate: * Original large single * Retrofit horizontal dual * Retrofit dual vertical * Dual sealed beam Same powerful drive as WalthersProto(R) locos featuring: - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die cast metal chassis - Constant and directional LED headlights Next18 DCC Plug Correct size RP-25 metal wheels Proto MAX(TM) metal knuckle couplers

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less

Available for Special Order only Ships as soon as product arrives! Special Orders are not guaranteed to be available; order may be cancelled. Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less