HO Scale

Stainless Steel Coupler & Special Purpose TweezersNormally closed tweezers are that extra hand you need. The auto clamping design of these tweezers make holding small parts effortless. Ideal for assembly couplers and gearboxes.The notch end of the tweezers fits nicely over trip pin to hold coupler parts together and when used in conjunction with the Kadee® Coupler Assembly Fixture. For use with HOn3 to On3 Scale Package Includes: (1) Coupler & Special Purpose Tweezers

Read more less

#309 Under-the-Ties Delayed-Action Electric Uncoupler Kit - HO Scale Kadee® #165 Red - Normally Open momentary contact push button switches are recommend. Fits any HO code track. This package contained one HO Scale Magne-Electric electromagnetic, delayed action uncoupler kit, ready to assemble and install Under-the-Ties. It can be installed on any straight layout track, but especially on mainlines, were false uncoupling my occur. Fits any HO code track. Operates: 16 volt DC. We recommend a 16 volt DC power source (at least 3 Amps) or 18 volt AC power source (at least 3 Amps)converted to DC with bridge rectifier. WARNING: Do not use the uncoupler continually. DO NOT activate the uncoupler for longer than 2 MINUTES at one time.This will avoid possible overheating which will damage the uncoupler. (Track Not Included) Package Includes: (1) Each Coil (1) Each Steel core (4) Each Field plates (1) Each Field plate divider (1) Each Upper track mounting plate (1) Each 10-32 x 7/8" Bolt (1) Each 10-32 Nut (3) Each 2 x 3/8" flat head self-tapping screws (4) Each 0-48 x 1/4" screws (4) Each 0-48 x 3/8" screws (1) Each Bridge Rectifier (1) Each Capacitor Recommended Accessories: 3 Amp Push button momentary switch SPST - Normally Open (Kadee #165) Light bulb - 14-20 Volts, .2 Amp #20 AWG Wire- insulated, strand in two color codes Rosin Core Solder - 1/16" size Track Section, 3 1/2" long Roadbed Section, 2 1/8" long Metal Rail Joiners Ballast   Recommended Tools: Power or Crank Drill - with 1/4" bit 1/4" Drill #52 Drill (Kadee #780 Tap & Drill set) #55 Drill (Kadee #780 Tap & Drill set) Reg. Screwdriver - with 1/8" head Modeler's Knife Razor Saw Flat Chisel, 1/2" Medium Tooth File - 1/2" wide Household Pliers Soldering Iron White Glue Fine Tooth File - 1/2" wide

Read more less

The #156 "Scale" All Metal Self-Centering WHISKER® Coupler features a "Scale" Metal Coupler (a smaller head coupler which is more to scale and is patterned after the type 'E" couplers) & Metal WHISKER® Centering Spring, insulated Draft Gear Box and Lid. The #156 Coupler may be mounted with the supplied #242 draft gear box, other Kadee® HO-Scale draft gear box shown below or with the Manufacturers cast-on coupler pockets. The coupler will couple and uncouple with other Kadee® HO and HOn3 couplers. The coupler has the same shank length as the #26, 36 or 46 coupler which will allow the modeler to remove the existing #26, 36 or 46 coupler and replace with the new smaller coupler. The #156 coupler is made of the same metal as the #46 for strength and rigidity. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox. Refer to our helpful Coupler Conversion Charts to determine the appropriate coupler to use on your model. HO-Scale Package Includes: (2) Pair #156 Scale Whisker® Metal Couplers - Long Centerset Shank (2) Pair #242 Snap-Together Gearboxes (2) #625 Knuckle Springs #156 Scale Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -  Long (25/64") (center hole to back of coupler head) Coupler Offset  -  Centerset Knuckle Spring  -   #625 Centering System  -   Whisker® Head  -   Scale Head Works In Place of  -   #26, #36 (#146 in a #252 box), long centerset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   25/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

The #153 "Scale" All Metal Self-Centering WHISKER® Coupler features a "Scale" Metal Coupler (a smaller head coupler which is more to scale and is patterned after the type 'E" couplers) & Metal WHISKER® Centering Spring, insulated Draft Gear Box and Lid. The #153 Coupler may be mounted with the supplied #242 draft gear box, other Kadee® HO-Scale draft gear box shown below or with the Manufacturers cast-on coupler pockets. The coupler will couple and uncouple with other Kadee® HO and HOn3 couplers. The coupler has the same shank length as the #23, 33 or 43 coupler which will allow the modeler to remove the existing #23, 33 or 43 coupler and replace with the new smaller coupler. The #153 coupler is made of the same metal as the #43 for strength and rigidity. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox. HO-Scale Package Includes: (2) Pair #153 Scale Whisker® Metal Couplers - Short Centerset Shank (2) Pair #242 Snap-Together Gearboxes (2) #625 Knuckle Springs #153 Scale Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -   Short (1/4") (center hole to back of coupler head) Coupler Offset  -  Centerset Knuckle Spring  -   #625 Centering System  -   Whisker® Head  -   Scale Head Works In Place of  -   #23, #33 (#143 in a #252 box), short centerset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   25/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

This industry leading coupler features an all metal coupler head, shank, and Whisker® centering spring and comes complete with insulated draft gearbox and lid. The #146 Magne-Matic® Whisker® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #26 coupler. HO-Scale Package Includes: (2) Pair #146 Whisker® Metal Couplers - Long Centerset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #146 Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Whisker® Head  -   Standard Head Works In Place of  -   #26, #36 (#146 in a #252 box), long centerset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

Mix and blend versatile and compatible products to realistically recreate natural color variances, contrasts and highlights. Easy-to-use products give modelers the results they expect. Realistically model crushed rock and stones Colorfast For any scale 23.4 in3 (383 cm3)

Read more less

Use the Easy Rock Carving Tools with Carving Plaster to carve custom rock formations. The Strata Tool helps you carve and shape large areas fast to model strata, blasted rock and other weathered and eroded outcrops. The Carving Tool has two sides - a Chisel and a Pick. Use the Chisel to carve gouges and cavities. Use the Pick to carve grooves, fine-line abrasions and striation markings. Keep your carving area free from debris with the Duster. 3 piece set Specially formulated to work with Terrain and Landscape products, these tools and adhesives are designed to simplify your modeling efforts. They are fully tested for results, safety, quality and durability.

Read more less

These 2-pin connectors allow locomotive wiring to be quickly disconnected for easier painting and servicing. This kit includes a 2-pin connector set, 6″ of red wire, 6″ of black wire, and four pieces of heat-shrink tubing.

Read more less

Hand crafted traffic barrels are HO scale accurate and uniquely designed by Squeaky’s Trains & Things, 100% exclusive and only available from Squeaky’s Trains. High Quality: Each and every barrel goes through an inspection to insure the best quality finish possible. 10 Pack. 3D printed with high quality materials. HO Scale Accurate Size Length: 0.33″ / 8.5mm Width: 0.33″ / 8.5mm Height: 0.47″ / 12.0mm Hand painted, each cone is unique. Unpainted also available. Notes: Vehicles, coin, or other props not included

Read more less

Code 83 HO Scale Manual Switch Right Side

Read more less

This 13.6mm x 9.6mm speaker could be classified as a “sugar cube” speaker. This style of speaker is often feature in cell phones and tablets and performs slightly differently from standard speakers. This style of speaker REQUIRES mounting with a baffle to produce much sound at all, but once they are mounted they produce significantly more sound than you might expect. Try them out in your space restricted installations. Dimensions: 0.54″ x 0.38″ x 0.11″ or 13.6mm x 9.6mm x 2.9mm Sound Pressure Level: 82 dB ± 3.0 dB at 0.5W , 10cm 1.5 KHz. Effective Frequency Band: 700 Hz. to 10,000 Hz. Power Rating: 0.8W DC Impedance: 8 Ω ± 15 % at 1.0V 2,000 Hz.

Read more less

The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: EMD-2 Diesel Dimensions: 74 x 17 x 5mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less