DCC Decoders

14 products


  • Sale Train Control Systems (TCS) 1533 | WOW101-KA-Diesel | HO Scale

    Train Control Systems Train Control Systems (TCS) 1533 | WOW101-KA-Diesel | HO Scale

    1 review

    2 in stock

    CD-Quality Sound: TCSā€™ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Keep-AliveĀ®: Included on-board for smooth, stutter-free operation. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for ā€œbuzzā€ free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LEDā€™s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwireā„¢ Compatible: Fully compatible with Airwireā„¢ operation. Audio AssistĀ®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CVā€™s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notchā„¢: A WOWSound original feature which uses TCSā€™ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Ā  Specs Interface Type:Ā Hard-Wire, Direct-Plug (9-Pin JST) Dimensions (L x W x H):Ā 1.35ā€³ x 0.658ā€³ x 0.22ā€³ or 34.29mm x 16.72mm x 5.59mm Scale:Ā HO Scale Continuous/Peak:Ā 1.3/2.0 Amp Total Functions:Ā 6 Function Rating:Ā 100 mA 12V Outputs:Ā 6 Ā  Speaker Selection This decoder is optimized for 8 Ī© speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.

    2 in stock

    $124.75$112.28

  • SoundTraxx 885816 | TSU-PNP8 8 Function ā€“ Tsunami2 (2-amp) Baldwin & Other Diesel Sound Decoder | HO Scale SoundTraxx 885816 | TSU-PNP8 8 Function ā€“ Tsunami2 (2-amp) Baldwin & Other Diesel Sound Decoder | HO Scale

    SoundTraxx SoundTraxx 885816 | TSU-PNP8 8 Function ā€“ Tsunami2 (2-amp) Baldwin & Other Diesel Sound Decoder | HO Scale

    1 review

    2 in stock

    The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturerā€™s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more! This decoder includes a connector to easily add aĀ CurrentKeeperĀ (P.N. 810140) to maintain performance over dirty track and switches.

    2 in stock

    $98.36

  • Train Control Systems (TCS) 1527 | WOW121-Diesel

    Train Control Systems Train Control Systems (TCS) 1527 | WOW121-Diesel

    1 in stock

    CD-Quality Sound: TCSā€™ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for ā€œbuzzā€ free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LEDā€™s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwireā„¢ Compatible: Fully compatible with Airwireā„¢ operation. Audio AssistĀ®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CVā€™s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notchā„¢: A WOWSound original feature which uses TCSā€™ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type:Ā Direct-Plug (21-Pin MTC) Dimensions (L x W x H):Ā 1.28ā€³ x 0.689ā€³ x 0.22ā€³ or 32.5mm x 17.5mm x 5.6mm Scale:Ā HO Scale Continuous/Peak:Ā 1.3/2.0 Amp Total Functions:Ā 8 Function Rating:Ā 100 mA 12V Outputs:Ā 8 Speaker Selection This decoder is optimized for 8 Ī© speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.

    1 in stock

    $95.95

  • SoundTraxx 885008 | TSU-2200 Tsunami2 (2-amp) Baldwin & Other Diesel Sound Decoder SoundTraxx 885008 | TSU-2200 Tsunami2 (2-amp) Baldwin & Other Diesel Sound Decoder

    SoundTraxx SoundTraxx 885008 | TSU-2200 Tsunami2 (2-amp) Baldwin & Other Diesel Sound Decoder

    1 in stock

    The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add aĀ CurrentKeeperĀ (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Baldwin & Other Diesel Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V ā€“ 22V Sound Channels: 16

    1 in stock

    $107.16

  • SoundTraxx 885812 | TSU-21PNEM8 Tsunami2 (1-amp) Baldwin & Other Diesel Sound Decoder SoundTraxx 885812 | TSU-21PNEM8 Tsunami2 (1-amp) Baldwin & Other Diesel Sound Decoder

    SoundTraxx SoundTraxx 885812 | TSU-21PNEM8 Tsunami2 (1-amp) Baldwin & Other Diesel Sound Decoder

    1 in stock

    The TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. They also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! The TSU-21PNEM8 can be wired to aĀ CurrentKeeperĀ (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Baldwin & Other Diesels Dimensions: 30.5 x 15.5 x 6.5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V ā€“ 22V Sound Channels: 16

    1 in stock

    $98.36

  • SoundTraxx 885004 | TSU-1100 Tsunami2 (1-amp) Baldwin & Others Diesel Sound Decoder

    SoundTraxx SoundTraxx 885004 | TSU-1100 Tsunami2 (1-amp) Baldwin & Others Diesel Sound Decoder

    1 review

    1 in stock

    The TSU-1100 is one of SoundTraxxā€™s smallest sound decoders, yet is packed with a plethora of high-performance features! You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. SoundTraxx also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This micro 1-amp, universal-style format is ideal for small models with minimal space. It includes an optional capacitor or can be wired to aĀ CurrentKeeperĀ (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Baldwin & Others Diesel Dimensions: 27 x 10.5 x 5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V ā€“ 22V Sound Channels: 16

    1 in stock

    $111.96

  • Digitrax SDXH187MT | Series 7 Sound Decoder | HO Scale

    Digitrax Digitrax SDXH187MT | Series 7 Sound Decoder | HO Scale

    1 in stock

    The Digitrax SDXH187MT is the perfect addition to your HO scale model trains. With its Series 7 Sound Decoder, this product provides realistic and high-quality sound experience. Being an industry leader, Digitrax guarantees superior performance and compatibility for your model trains. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer More Information Item # SDXH187MT Brand Digitrax Scale HO Scale MSRP $65.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

    1 in stock

    $52.00

  • Digitrax SDH187MT | Series 7 Sound Decoder | HO Scale

    Digitrax Digitrax SDH187MT | Series 7 Sound Decoder | HO Scale

    1 in stock

    This Digitrax SDH187MT is a high-quality Series 7 Sound Decoder designed for HO Scale models. With advanced sound technology, this decoder brings realistic audio to your train layout. Its compact design and easy installation make it a must-have for any model train enthusiast. 2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer More Information Item # SDH187MT Brand Digitrax Scale HO Scale MSRP $55.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

    1 in stock

    $44.00

  • SoundTraxx 885616 | BLU-PNP8 Blunami Baldwin & Others Diesel Sound Decoder | HO Scale SoundTraxx 885616 | BLU-PNP8 Blunami Baldwin & Others Diesel Sound Decoder | HO Scale

    SoundTraxx SoundTraxx 885616 | BLU-PNP8 Blunami Baldwin & Others Diesel Sound Decoder | HO Scale

    2 in stock

    Blunami will change the way you enjoy the model railroading hobby!Ā The BLU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturerā€™s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. ItĀ can be operated in three different ways: DC, DCC, and Wireless mode. Using the Blunami App, you can operate your locomotive incredibly easily.Ā  Need Help Choosing a Sound Profile?We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (EMD, GE, ALCO, etc.). If you don't know which sound profile you need, the best place to start is theĀ Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile. If you need further assistance explore these links:Ā  Decoder Selector: Tells you which board format and part number you need for specific models. Sound Samples: Hear SoundTraxx sounds in action! Choosing the Right Sound System: If you areĀ new to SoundTraxx, model railroading, or are unfamiliar with our products. Sound Selection References: There are several for each decoder and they can be found below or in theĀ ManualsĀ section of SoundTraxx's website. DYNAMIC DIGITAL EXHAUSTĀ For added realism, youā€™ll love SoundTraxx's reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your model's engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier.Ā When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to createĀ the most realistic experience possible. HIGH-QUALITY SOUND LIBRARYSoundTraxx's large selection of sound effects includes:Ā  Up to 12 Prime Movers in each sound profileĀ  Up to 12 BellsĀ  40+ Airhorns Additional couplers, cab chatter, and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, and more. EASY INSTALLATIONThis decoder includes a connector to easily add aĀ CurrentKeeper (P.N.Ā 810140Ā orĀ 810160) to maintain performance over dirty track and switches. This 2-amp, universal-style format includes a connector to easily add a CurrentKeeper (P.N. 810140Ā orĀ 810160) to maintain performance over dirty track and switches. Dimensions: 74 x 17 x 5mmĀ  Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V ā€“ 22V Sound Channels: 16 Ā  Blunami Owner's Manual Blunami Installation Guide Blunami Diesel User's Guide Ā  Blunami Sound Selection References: Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Ā  Blunami Sound Samples Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. SoundTraxx proudly design and manufacture our industry-best products right here in the USA, and SoundTraxx's friendly customer support staff work side-by-side with the rest of our product team.

    2 in stock

    $130.36

  • SoundTraxx 885620 | BLU-4408 Blunami Baldwin & Other Diesel Sound Decoder | Multi Scale SoundTraxx 885620 | BLU-4408 Blunami Baldwin & Other Diesel Sound Decoder | Multi Scale

    SoundTraxx SoundTraxx 885620 | BLU-4408 Blunami Baldwin & Other Diesel Sound Decoder | Multi Scale

    2 in stock

    Blunami will change the way you enjoy the model railroading hobby! The Blunami BLU-4408The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decodersĀ can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use.Ā You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUSTĀ For added realism, youā€™ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to createĀ the most realistic experience possible.HIGH QUALITY SOUND LIBRARYOur large selection of high quality sound effects include:Ā  10 Exhaust Chuffs Up to 12 Prime Movers in each sound profileĀ  Up to 12 BellsĀ  90 Whistles 40+ Airhorns Additional couplers, dynamos, cab chatter and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATIONNo soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N.Ā 810140Ā orĀ 810160) to maintain performance over dirty track and switches. Dimensions: 69 x 30.5 x 14mmĀ  Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 8 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V ā€“ 26V Sound Channels: 16 Ā  Blunami Owner's Manual Blunami Installation Guide Blunami Steam User's Guide Blunami Diesel User's Guide Blunami Electric User's Guide Ā  Blunami Sound Selection References: Blunami Steam-2 Sound Selection Reference Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Blunami Electric Sound Selection Reference Ā  Blunami Sound Samples Blunami Steam-2 Sounds Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds Blunmai Electric Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

    2 in stock

    $204.76

  • SoundTraxx 885608 | BLU-2200 Blunami Baldwin & Other Diesel Sound Decoder | Multi Scale SoundTraxx 885608 | BLU-2200 Blunami Baldwin & Other Diesel Sound Decoder | Multi Scale

    SoundTraxx SoundTraxx 885608 | BLU-2200 Blunami Baldwin & Other Diesel Sound Decoder | Multi Scale

    2 in stock

    Blunami will change the way you enjoy the model railroading hobby! The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices. DYNAMIC DIGITAL EXHAUSTĀ For added realism, youā€™ll love SoundTraxx's reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier.Ā When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to createĀ the most realistic experience possible. HIGH QUALITY SOUND LIBRARYSoundTraxx's large selection of high quality sound effects include:Ā  10 Exhaust Chuffs Up to 12 Prime Movers in each sound profileĀ  Up to 12 BellsĀ  90 Whistles 40+ Airhorns Additional couplers, dynamos, cab chatter and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATIONThe BLU-2200 can simply plug into models equipped with a DCC quick plug. OurĀ 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135)Ā can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models. This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N.Ā 810140Ā orĀ 810160) to maintain performance over dirty track and switches. Dimensions: 41.9 x 18.8 x 6.8mmĀ  Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V ā€“ 22V Sound Channels: 16 Ā  Blunami Owner's Manual Blunami Installation Guide Blunami Steam User's Guide Blunami Diesel User's Guide Blunami Electric User's Guide Ā  Blunami Sound Selection References: Blunami Steam-2 Sound Selection Reference Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Blunami Electric Sound Selection Reference Ā  Blunami Sound Samples Blunami Steam-2 Sounds Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds Blunmai Electric Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

    2 in stock

    $135.96

  • Sale Train Control Systems (TCS) 1530 | WOW101-Diesel | HO Scale Train Control Systems (TCS) 1530 | WOW101-Diesel | HO Scale

    Train Control Systems Train Control Systems (TCS) 1530 | WOW101-Diesel | HO Scale

    Out of stock

    CD-Quality Sound: TCSā€™ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for ā€œbuzzā€ free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LEDā€™s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwireā„¢ Compatible: Fully compatible with Airwireā„¢ operation. Audio AssistĀ®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CVā€™s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notchā„¢: A WOWSound original feature which uses TCSā€™ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type:Ā Hard-Wire, Direct-Plug (9-Pin JST) Dimensions (L x W x H):Ā 1.35ā€³ x 0.658ā€³ x 0.22ā€³ or 34.29mm x 16.72mm x 5.59mm Scale:Ā HO Scale Continuous/Peak:Ā 1.3/2.0 Amp Total Functions:Ā 6 Function Rating:Ā 100 mA 12V Outputs:Ā 6 Speaker Selection This decoder is optimized for 8 Ī© speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.

    Out of stock

    $105.49$94.94

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account