$10 to $25
Bowser Trains Bowser Trains 22 | Foam Work Cradle | Locomotive & Freight Car Tool | HO Scale
The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For HO Scale models Dimensions: 6"w x 11"
$11.99
Squeaky's Trains Squeaky's Trains | 18″ Traffic/Construction Cones | HO Scale
Hand Crafted 18″ Construction Cones uniquely created by Squeaky’s Trains & Things. 10 Pack 3D printed with high quality materials. HO Scale Size: 0.19″ / 5.0mm (1:87) Hand painted, each cone is unique. Unpainted version also available. Notes: Vehicle Not Included. Unpainted or un-finished 3D printed models may come in any base color that was available for use at the time of printing. Base color requests are accepted but not always possible to fulfill. Please, no returns or refunds for base color reasons.
$0.16 - $1.99
NixTrainz NixTrainz | Decoder Buddy Mini (1k Ohm Resistors Onboard)
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM. The mother board includes: One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".) It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!! The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation. Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)
$10.99$9.89
Circuitron Circuitron 800-6006 | Tortoise Switch Machine Value 6 Pack | Multi Scale
The Circuitron Tortoise Switch Machine (6 Pack) Motor stalls at each end of throw No cutoff contact necessary Precision engineered gear-drive mechanism Enclosed construction Constant tension on switch points Ultra-Simple Mounting! No additional brackets or linkage necessary Fulcrum adjusts for use in all scales - Z to G. Prototypical Slow Motion Action! 3 seconds to complete the throw Convenient Auxiliary Contacts! 2 sets SPDT provided for powering the frogs or signals
$109.99
Woodland Scenics Woodland Scenics 619 | Static Grass Light Green 4mm
Static Grass 42 grams Grass length: 4mm
$4.49$4.04
Woodland Scenics Woodland Scenics 618 | Static Grass Medium Green 4mm | Multi Scale
Static Grass 42 grams Grass length: 3mm
$4.59
Train Control Systems Train Control Systems (TCS) 1694 | WOWSpeaker 28mm High Bass Round 4W | Multi Scale
You haven’t heard WOWSound until you’ve heard it through our 28mm High Bass 4W WOWSpeaker! This speaker handles an unprecedented 4 watts of power, and showcases a mighty bass reflex that packs a big sonic punch. Welcome to the new standard for sound in model trains – pick one up today and prepare to be blown away! This speaker is 28mm (1.1″) diameter and 13.5mm (0.53″) thick which includes a rubberized mounting gasket. The mounting gasket allows for unrestricted movement of the cone, preventing distortion or physical damage! Note: Product listing is for 1x speaker. Additional images provided for clarity. Dimensions: 1.1″ diameter x 0.53″ or 28mm diameter x 13.5mm Sound Pressure Level: 84 ± 3.0 dB (A), at 0.63 V, 0.1 m, Average 500,1,000, 2,000, 4,000 (Hz ), at 25°C Effective Frequency Band: 250 Hz. to 20 kHz. Power Rating: 3W (Typical) 4W (Peak) DC Impedance: 4 Ω ; ± 15%, at 1,000 Hz., 1.0 V
$13.79$12.41
Woodland Scenics Woodland Scenics 641 | Field System™ Power Supply | Multi Scale
Supply power to your Static King 639 with the Woodland Scenics 641 Field System™ Power Supply. This power supply is a reliable source of energy for your Static King to run smoothly, making it the perfect addition to your collection. Optimizes Static King performance.
$14.29
SoundTraxx SoundTraxx 810123 | NMRA 8-pin Connector (set of 4)
This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.
$11.16
Woodland Scenics Woodland Scenics 644 | Static-Tac® | Multi Scale
Static-Tac is specially formulated and has the right viscosity for adhering Static Grass and Briar Patch. It comes in a bottle with a graduated tip that works for large or small areas. Static-Tac is an easy-to-spread adhesive that dries to a clear matte finish for realistic results.
$8.39$7.55
Woodland Scenics Woodland Scenics 5770 | Just Plug Lighting System | Power Supply
INPUT: 120VAC, 60Hz OUTPUT: 24VDC, 1000mA Type A RoHS Compliant
$17.79
SoundTraxx SoundTraxx 810155 | Mini Cube 2 Oval Speaker/Baffle
SoundTraxx’s tiniest speaker comes with a properly proportioned speaker enclosure and provides remarkable volume for tiny models! Dimensions: 13 x 9 x 9.4mm(D)Frequency Response: 100Hz – 10kHzPower: 40mW (Nominal) 75mW (Peak)Impedance: 32 Ohms Note: When using this speaker with a decoder that has a 1-2 Watt, 8 Ohm amplifier; it must be wired in parallel with another 32 Ohm speaker to create a 16 Ohm load for the amplifier.
$13.15
