$100 to $250
Woodland Scenics Woodland Scenics 623 | Static Grass Light Green 7mm | Multi Scale
Static Grass 42 grams Grass length: 7mm
$4.59$4.13
Woodland Scenics Woodland Scenics 615 | Static Grass Light Green 2mm
Static Grass 70 grams Grass length: 2mm
$4.49
Woodland Scenics Woodland Scenics 5740 | Just Plug Lighting System | Warm White LED Stick-On Lights
2 lights with 24" (60.9 cm) cable/pkg - 25mA each
$7.99
SoundTraxx SoundTraxx 810135 | 9-pin JST to NMRA 8-pin Wiring Harness
The SoundTraxx 9-pin JST to NMRA 8-pin wiring harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket.
$11.16
Woodland Scenics Woodland Scenics 628 | Static Grass Straw 12mm | Multi Scale
Static Grass 28 grams Grass length: 12mmm
$4.49$4.04
Woodland Scenics Woodland Scenics 620 | Static Grass Straw 4mm
Static Grass 42 grams Grass length: 4mm
$4.50$4.05
SoundTraxx SoundTraxx 810112 | 25 x 14mm Oval 8-ohm Speaker
This small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium. Dimensions: 25 x 14 x 5.2mm(D)Frequency Response: 300Hz – 20kHzPeak Power: 1.5 WattsImpedance: 8 Ohms
$12.76
SoundTraxx SoundTraxx 884009 | TSU-4400 – Tsunami2 (4-amp) Steam-2 Sound Decoder | Multi Scale
Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) The TSU-4400 is designed for models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. STX810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Steam-2 Dimensions: 69 x 30.5 x 14mm Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 6 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16
$164.00
Woodland Scenics Woodland Scenics 625 | Static Grass Dark Green 12mm | Multi Scale
Static Grass 28 grams Grass length: 12mmm
$4.59$4.13
Woodland Scenics Woodland Scenics 622 | Static Grass Medium Green 7mm
Static Grass 42 grams Grass length: 7mm
$4.59$4.13
Ring Engineering Ring Engineering WH-9 | RailPro Wiring Harness
Quantity: Two per packageThe WH-9 wiring harness can be used with all RailPro Locomotive modules. The WH-9 conforms to NMRA 9 pin plug standard so it can be used for any DCC locomotive where applicable. The WH-9 wiring harness can be used to add the required DCC 9 pin plug (JST) to a non-DCC locomotive. Or you can use it after removing all circuit boards from a DCC equipped or DCC ready locos (too allow a cleaner installation or make more room for a RailPro module). Please see LM instructions for actual wiring. JST connectors can come in two different ways that the pins are connected to the wires (crimp style and insulation displacement) both connect in the same manner and are interchangeable. However, we have found the crimp style pins to be far more dependable than the insulation displacement connectors that some DCC suppliers sell. WH-9 has a JST 9 pin with crimp style pins.
$6.39
NixTrainz NixTrainz | Decoder Buddy Mini (2.2k Ohm Resistors Onboard)
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM. The mother board includes: One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".) It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!! The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation. Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)
$10.99
