Gift Ideas Under $25.00

The Lionel 6-82918 is a 3-foot power cable extension for the Lionel Plug-Expand-Play (LionChief / FasTrack) system. With 3-pin male and female connectors, it slides between any two Plug-Expand-Play components - your transformer, terminal track, accessory cables, or other extensions - to add 3 feet of reach exactly where you need it. Looking for more O gauge track and accessories? Browse our O Gauge Trains & Track and O Gauge Track & Accessories. Features 3-foot (36 inch) power cable extension 3-pin male connector on one end, 3-pin female on the other - works with any Lionel Plug-Expand-Play component Add length between transformer and terminal track, or between any two Plug-Expand-Play parts Compatible with FasTrack Plug-Expand-Play, LionChief, and other Lionel 3-pin powered systems Plug-and-play install - no tools or wiring required Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-82918 Scale O Gauge (1:48) Length 3 feet (36 inches) Connectors 3-pin male / 3-pin female System Lionel Plug-Expand-Play Condition New FAQ Will this work with my LionChief or FasTrack Plug-Expand-Play setup?Yes. The 3-pin M/F connectors are the standard Plug-Expand-Play interface used across Lionel's modern powered accessory and track lineup. Can I chain multiple extensions together?Yes. You can connect 3-foot extensions end to end to reach any distance you need, and you can mix the 3-foot 6-82918 with longer 6-foot extensions to get the exact length without slack. Will this work with traditional O gauge or O-27 wiring?No. This is specifically for Lionel's Plug-Expand-Play 3-pin system. Older Lionel layouts using lockons and screw terminals use a different connection. Is this a single cable or a set?One single 3-foot extension cable per package.

Read more less

The Lionel 6-82045 is a 6-foot extension cable for the Plug-Expand-Play system, with 6-pin connectors that link your Lionel command base, controllers, and accessory ports across longer distances. If your layout has spread out and the standard cables can't reach, this is the drop-in solution — no soldering, no adapters, just plug it in and keep building. Looking for more O Gauge track and accessories? Browse our O Gauge Trains & Track and O Gauge Track & Accessories. Features Genuine Lionel Plug-Expand-Play 6-pin control cable extension 6 feet (182.9 cm) of length to extend reach across larger layouts Pre-molded 6-pin connectors plug directly into Plug-Expand-Play components No stripping, soldering, or adapters required — plug-and-play Compatible with all Lionel Plug-Expand-Play accessories, lighting, and controllers Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-82045 Scale O Gauge (1:48) Product Type Control Cable Extension Connector Type 6-pin Plug-Expand-Play Cable Length 6 feet (182.9 cm) Compatibility Lionel Plug-Expand-Play system Condition New FAQ What is Plug-Expand-Play?It's Lionel's snap-together wiring system for accessories, lighting, and command components. Each device has a 6-pin (or 3-pin power) port that accepts pre-molded cables — no stripping, soldering, or screw terminals. Will this work with my Lionel CAB-1L / Base 1L?Yes. The 6-pin control cable extension is the same connector standard used across the Plug-Expand-Play product family, including command base, controllers, and Lionchief Plus 2.0 accessories that use this cable type. What's the difference between 3-pin (6-82043) and 6-pin (6-82045)?The 3-pin version (6-82043) is a power-only cable. The 6-pin version (6-82045) is the control cable that carries control signals plus power for two-way communication between Plug-Expand-Play components. How long is the cable?6 feet (about 1.8 meters / 182.9 cm).

Read more less

The Lionel 6-12022 FasTrack O36 Half Curve is a single 22½° half-curve track section for Lionel's FasTrack O Gauge system. Sixteen of these sections complete a full O36 (36" diameter) circle — the same standard radius used in current Lionel starter sets — making this the perfect filler piece when you need to nudge a curve geometry by half-a-section to fit your layout. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features 22½° half-curve section — half the angle of a standard FasTrack O36 curve O36 (36" diameter) curve geometry — matches the curves in standard Lionel starter sets Sixteen half curves complete a full O36 circle Built on Lionel's FasTrack realistic roadbed system with pre-attached ties and ballast Snap-together connectors — no tools required Compatible with all Lionel O Gauge FasTrack and rolling stock Scale: O Scale (1:48) More Information Brand Lionel Item Number 6-12022 Scale O Scale (1:48) Product Type Half Curve Track Section Track System FasTrack Curve Radius O36 (36" diameter) Section Angle 22½° Pieces per Circle 16 Condition New UPC 023922120229 FAQ What's the difference between this and a full O36 curve?The full O36 curve (6-12015) is a 45° section. This half curve is exactly half — 22½° — so it's the right piece to use when a full curve is too much and a straight isn't enough. How many do I need to make a circle?Sixteen half curves make a complete O36 circle. You can also mix half curves with full curves and straights to make custom layouts. Will this work with my older Lionel O36 FasTrack starter set?Yes. It's the same FasTrack roadbed system and O36 geometry used in current and recent Lionel FasTrack starter sets, so it integrates seamlessly. Is this sold individually or in a pack?Sold individually as one (1) half-curve section.

Read more less

The Lionel 6-12015 FasTrack O36 Curved Track is a standard 45° curved section for Lionel's FasTrack O Gauge system. Eight of these sections complete a full O36 (36" diameter) circle — the same standard radius used in current Lionel starter sets — making this the workhorse curve piece for any FasTrack layout. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features 45° curved section — the standard FasTrack O36 curve O36 (36" diameter) curve geometry — matches the curves in standard Lionel starter sets Eight curves complete a full O36 circle Built on Lionel's FasTrack realistic roadbed system with pre-attached ties and ballast Snap-together connectors — no tools required Compatible with all Lionel O Gauge FasTrack and rolling stock Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-12015 Scale O Gauge (1:48) System FasTrack Curve Diameter O36 (36") Section Angle 45° Sections per Circle 8 Condition New FAQ Will this work with my existing FasTrack layout?Yes — all FasTrack pieces snap together regardless of when they were made. This is the same O36 curve used in current Lionel starter sets. How many do I need for a full circle?Eight 45° sections complete a full O36 circle. For a basic oval, eight curves plus straights are typical. What's the difference between O36, O48, O60, O72?The number is the diameter in inches. O36 (36") is the standard starter-set radius. Larger curves like O72 give a more realistic look and accommodate longer locos and cars.

Read more less

The Lionel 6-12014 FasTrack 10" Straight Track is the workhorse straight section for Lionel's FasTrack O Gauge system. At a full 10 inches long, this is the standard piece you'll use for sidings, mainlines, and connecting curves into ovals or larger layouts. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features 10" straight section — the standard FasTrack straight piece Built on Lionel's FasTrack realistic roadbed system with pre-attached ties and ballast Snap-together connectors — no tools required Compatible with all Lionel O Gauge FasTrack and rolling stock Same straight section used in current Lionel starter sets Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-12014 Scale O Gauge (1:48) System FasTrack Length 10 inches Type Straight Track Section Condition New FAQ How many do I need to extend my oval?Two 10" straights are typically added per oval extension — one on each side — to add 10 inches of straight running. What other straight sections does Lionel make?FasTrack also includes 1 3/4", 4 1/2", 5" half-straight, and 30" sections so you can fit any layout geometry. Does this work with the older Lionel tubular track?FasTrack and traditional Lionel tubular track use different connectors. They are not directly compatible without a transition piece.

Read more less

Lionel FasTrack O36 Curved Track 4-Pack — four 45° curved sections in O Gauge, with a wide 36" diameter curve that gives semi-scale and modern Lionel locomotives plenty of room to track smoothly. The molded gray roadbed and pre-attached ties give your layout an instant ballasted look without any extra scenery work, and the snap-together pin connections lock tight so trains roll over the joints without shorts or derailments. Eight pieces make a full O36 circle, so this 4-pack gets you a clean half-circle right out of the box — perfect for expanding an existing FasTrack oval or building out the curves on a new layout. Browse our full O Scale Track & Accessories and O Scale Trains & Track to round out your FasTrack system. What's Included Item Qty FasTrack O36 Curved Track Section (45°) 4 Features Four 45° curved sections of O36 FasTrack — eight sections form a complete circle. Realistic gray molded roadbed with pre-attached ties for a finished, ballasted look. Snap-together pin connections lock securely and align the rails automatically. 36" diameter curve gives smoother running for larger O Gauge locomotives and rolling stock. Compatible with the full Lionel FasTrack system — switches, crossovers, straights, and accessory tracks. Scale: O Scale (1:48) — three-rail O Gauge. More Information Brand Lionel Item Number 6-12033 Scale O Scale (1:48) Product Type Curved Track Pack Track System Lionel FasTrack Curve Radius O36 (36" diameter) Section Angle 45° per section (8 = full circle) Condition New UPC 023922120335 FAQ How many of these do I need to make a full circle?You'll need 8 sections (two of these 4-packs) to form a complete O36 circle. Does this work with older Lionel tubular track?No. FasTrack uses its own roadbed and pin system — you'll need a FasTrack-to-tubular transition piece to combine the two. What's the minimum locomotive that can run on O36?O36 is the smallest curve recommended for most modern Lionel locomotives. Most semi-scale and traditional engines run great; some larger scale-detailed locos require O54 or larger. Are these compatible with MTH RealTrax or Atlas O?No. FasTrack is a Lionel-only system. It does not interchange with MTH RealTrax, ScaleTrax, or Atlas O without adapter pieces.

Read more less

The Lionel 6-81313 FasTrack Plug-Expand-Play Power Lock-On is a snap-in power feed that connects your transformer to a FasTrack section using Lionel's Plug-Expand-Play (PE-P) connector system. Just snap it onto any FasTrack straight or curve, plug in the included PE-P cable, and you've got track power — no soldering, no terminal lugs, no fuss. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features Plug-Expand-Play (PE-P) compatible — works with Lionel's PE-P transformer system Snaps onto any FasTrack section — no tools, no soldering required Provides clean, reliable track power feed Compatible with Lionel CW-80, PowerHouse, and other PE-P transformers Replaces traditional terminal-section wiring Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-81313 Scale O Gauge (1:48) System FasTrack with Plug-Expand-Play Type Power Lock-On / Track Power Feed Condition New FAQ What is Plug-Expand-Play (PE-P)?It's Lionel's modern modular wiring system that uses keyed connectors instead of bare wires. Power, accessories, and switches all use the same PE-P plugs. Do I need this if I already have a terminal section?Only if you want to use the PE-P system. If your transformer has bare-wire terminals, the standard 6-12016 FasTrack Terminal Section works fine. Does the PE-P cable come with this?Yes — the connector cable is included.

Read more less

Walthers HO Ford® Expedition SSV – White SUV with Blue Stripe & Lightbar Give your HO scale layout a realistic law enforcement or highway patrol presence with this Ford® Expedition Special Service Vehicle (SSV) from Walthers SceneMaster. Decorated in white with a crisp blue stripe and equipped with a molded rooftop lightbar (nonworking), this officially licensed SUV includes colorful decals for customizing it as a police, sheriff, or highway unit. A perfect match for modern layouts from 1997 to today. 🚨 White SUV with Blue Stripe – Clean emergency look for police or patrol use 🎯 Includes Police, Sheriff & Highway Patrol Decals – Apply as needed 🔧 Nonworking Lightbar Molded In – Adds realism with no wiring needed 🧰 Fully Assembled HO Scale Model – Clear windows, interior details, and rolling wheels 🏙️ Great for Layouts from 1997–Present – Use with Walthers police stations and fire scenes More Information Brand Walthers SceneMaster Kit Type Assembled Vehicle Scale HO Scale Model Ford Expedition SSV (White w/ Blue Stripe) TCA Grading C-10 Mint – Brand New Availability Ships same or next business day MSRP $18.98 Item # 949-12045 Made In China Manuals N/A Browse HO Scale Vehicles or shop all Police-Themed Accessories. ❓ Frequently Asked Questions Is the lightbar functional?No, the lightbar is molded in for realism but does not light up. What decals are included?Police, sheriff, and highway patrol markings are provided. Is assembly required?No, the model is fully assembled and ready to use.

Read more less

Bring undercover realism to your HO scale scenes with this silver unmarked Ford® Crown Victoria Police Interceptor from Walthers SceneMaster. Based on real-life law enforcement vehicles used from 1998 onward, this fully finished model is perfect for staging unmarked patrols, stakeouts, or modern city streets. No assembly or decals needed — this car is ready to roll. Authentic Ford® Crown Victoria body in silver finish No lightbar – unmarked unit design with clean roofline Detailed interior, clear windows, grille, and rolling wheels Perfect for undercover police, detective scenes, or city traffic Assembled Vehicle – factory finished and layout ready More Information Brand Walthers SceneMaster Kit Type Assembled Vehicle Scale HO Scale (1:87) Model 949-12023 Color Silver TCA Grading C-10 Mint – Brand New Availability Ships same or next business day MSRP $15.98 Item # 949-12023 Made In China Manuals Not required Explore HO Scale | Shop SceneMaster Vehicles | Browse All HO Vehicles Frequently Asked Questions Is this model prebuilt? Yes, it comes fully assembled and painted. Can it be repainted or decaled? No, this vehicle is factory finished and not intended for customization. Are there any lights? No, this version is an unmarked unit with no lightbar or emergency lighting.

Read more less

Add realistic emergency detail to your HO layout with this Fire Command Ford® Crown Victoria Police Interceptor from Walthers SceneMaster. Used by departments across North America from 1998 to the 2010s, this fully assembled model is painted bright red with official fire markings, making it layout-ready right out of the box. Perfect for fire scenes, roadblocks, city patrols, or municipal yards. Licensed Ford® Crown Victoria Police Interceptor body Factory-painted in bright red with Fire Command decals Includes rooftop lightbar (non-functional) and rolling wheels Detailed interior and clear windows for added realism Assembled Vehicle – no painting or decals required Perfect for modern-era HO scale fire and rescue scenes More Information Brand Walthers SceneMaster Kit Type Assembled Vehicle Scale HO Scale (1:87) Model 949-12020 Color Red TCA Grading C-10 Mint – Brand New Availability Ships same or next business day MSRP $15.98 Item # 949-12020 Made In China Manuals Not required Explore HO Scale | Shop SceneMaster Vehicles | Browse All HO Vehicles Frequently Asked Questions Is this model assembled? Yes, it’s fully built and painted — ready to place on your layout. Can I repaint or re-decal it? No, this item comes prefinished and cannot be modified. Is the lightbar functional? No, it’s for visual display only.

Read more less

Keep your model trains running smoothly with JT's Mega Steam 001 | B-Gone Cleaner. This 2 oz. bottle is specially formulated to effectively remove dirt and grime, ensuring optimal performance for all scales of model trains. Trust in the expert cleaning power of JT's Mega Steam 001 B-Gone Cleaner. Made in the USA More Information Item # 001 Brand JT's Mega Steam Scale All Scales Bottle Size 2 Oz Glass Bottle with Spray Type B-Gone Cleaner MSRP $12.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

Boost the realism of your model train display with JT's Mega Steam 155 Smoke Fluid. This 2 oz. bottle, specifically designed for multi-scale use, produces a realistic cinder smoke effect. With its powerful formula, your locomotives will emit authentic smoke, providing an immersive experience for both you and your audience. Made in the USA More Information Item # 155 Brand JT's Mega Steam Scale All Scales Bottle Size 2 Oz Glass Bottle with Eye Dropper Scent Cinders MSRP $8.50 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less