N Scale Metal pole and arms LED lights for low current drain Ready to use with resistors attached Designed for easy mounting Clock face is illuminated 2 clocks in the package Voltage Requirements: 14 to 18 volts AC or DC

Read more less

Make HO Scale highways safer and more realistic with the Post-1960s Cantilever Grade Crossing Signal from SceneMaster featuring: Long-lasting LEDs Adds animation and realism to model street scenes Modern American cantilever-style signals as used in many communities Correct scale dimensions Install in minutes in new or existing scenery Fully assembled, ready to use Color-coded hook up wires Operate with Crossing Signal Controller (949-4359, sold separately)

Read more less

Protect motorists along your HO Scale railroad with the SceneMaster Grade Crossing Signal Controller. Designed to provide a realistic flashing rate with all SceneMaster Crossing Signals (each sold separately) the unit comes fully assembled and ready to use on DC-powered layouts*. Additonal features include: Controls up to 4 signals Includes 4 optical sensors Fully assembled control unit ready to use on DC layouts Simple plug-in wiring connections Operates on 18 volt AC from power pack accessory terminals Complete installation and hook up instructions included *PLEASE NOTE: This unit is only for use on DC layouts - DCC systems can damage the controller.

Read more less

The Pedestal Traffic Lights are single-faced and ideal for busy intersections in a downtown area. They are ready to place right out of the package. They're hand-painted and authentically weathered. The Traffic Lights are pre-wired and made for use with the Just Plug® Lighting System. Single-faced and includes two red lights and two green lights, enough for one 4-way intersection. 4 Pedestal Traffic Lights (2 red / 2 green) each with 36 in (91.4 cm) wire 2 Linker Plugs RoHS Compliant

Read more less

HO Scale Metal Pole and arm Led Light with low current drain Ready to use with resistor attached Designed for easy mounting

Read more less

Green LED Stick-On Lights 25mA Includes 24" cables 2 lights per package Ready to plug into Light Hub (sold separately) INSTRUCTIONS: Align locking tabs on Light Plug with front of Light Hub (JP5700, JP5701) and insert into LIGHT Port until locking tabs click into place. Remove release paper from back of Light and stick on where desired. Green plastic band (1") on cable identifies Green light.

Read more less

This bundle of N-Scale Just Plug® Classic Vehicles fills up one Light Hub (included). Each 40s/ 50s style Vehicle includes a driver, LED headlights and taillights. These Vehicles have custom colors only available in the Value Packs. Give the illusion of movement on your layouts with Just Plug® Vehicles. Bulk up on savings over buying individually with Value Packs. Pair with Just Plug® Traffic Lights and Just Plug Street Lights. Includes:  1 Midnight Ride 1 Blue Coupe 1 Comfy Cruise 1 Downtown Drive 4 Linker Plugs 1 Light Hub CTRL Port Plug (installed) 1 Double-sided Mounting Tape 2 Mounting Screws Illustrated Instructions   More Information Item # JP5920 Brand Woodland Scenics Scale N MSRP $119.99  

Read more less

This bundle of N-Scale Just Plug® Cruising Vehicles fills up one Light Hub (included). Each 40s/ 50s style Vehicle includes a driver, LED headlights and taillights. These Vehicles have custom colors only available in the Value Packs. Give the illusion of movement on your layouts with Just Plug® Vehicles. Bulk up on savings over buying individually with Value Packs. Pair with Just Plug® Traffic Lights and Just Plug Street Lights. Includes:  1 City Classic 1 Station Wagon 1 Cool Convertible 1 Fancy Fins 4 Linker Plugs 1 Light Hub CTRL Port Plug (installed) 1 Double-sided Mounting Tape 2 Mounting Screws Illustrated Instructions   More Information Item # JP5919 Brand Woodland Scenics Scale N MSRP $119.99  

Read more less

This bundle of N-Scale Just Plug® Work Vehicles fills up one Light Hub (included). Each 40s/50s style Vehicle includes a driver, LED headlights and taillights. These Vehicles have custom colors only available in the Value Packs. Give the illusion of movement on your layouts with Just Plug® Vehicles. Bulk up on savings over buying individually with Value Packs. Pair with Just Plug® Traffic Lights and Just Plug Street Lights. Includes:  1 Police Car 1 Work Truck 1 Green Pickup 1 Henry Hauler 4 Linker Plugs 1 Light Hub CTRL Port Plug (installed) 1 Double-sided Mounting Tape 2 Mounting Screws Illustrated Instructions   More Information Item # JP5918 Brand Woodland Scenics Scale N MSRP $119.99  

Read more less

The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars. We are offering two versions: The version with Part number 50700 is equipped with warmwhite LEDs, while on part number 50702 we installed yellow LEDs. This will give you the choice to match the lighting strips with your existing cars. As usual for all ESU lighting strips, you can adjust the brightness according to your wishes with the help of a small variable resistor (potentiometer). Thanks to built-in voltage control the brightness remains almost constant even when conventional driving. To bridge prolonged power interruptions, you may add a PowerPack. Of course, the lighting strips can be arbitrarily cut to fit the cars of all manufacturers and comes with a red taillight. You may add a LokPilot Fx V4.0 function decoder at any time. Warm White 10 x 0.35" More Information Item # 50702 Brand ESU Scale HO, TT, N Pack Size 1 MSRP $27.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars. We are offering two versions: The version with Part number 50700 is equipped with warmwhite LEDs, while on part number 50702 we installed yellow LEDs. This will give you the choice to match the lighting strips with your existing cars. As usual for all ESU lighting strips, you can adjust the brightness according to your wishes with the help of a small variable resistor (potentiometer). Thanks to built-in voltage control the brightness remains almost constant even when conventional driving. To bridge prolonged power interruptions, you may add a PowerPack. Of course, the lighting strips can be arbitrarily cut to fit the cars of all manufacturers and comes with a red taillight. You may add a LokPilot Fx V4.0 function decoder at any time. Yellow 10 x 0.35" More Information Item # 50700 Brand ESU Scale HO, TT, N Pack Size 1 MSRP $27.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The LokSound by ESU LED Interior Lighting Strips are perfect for lighting HO and N Scale passenger car interiors operating on DCC layouts. They're designed for use only on track power (electrical wipers and accessories available separately). Offered with warm white (397-50708) or yellow (397-50709) LEDs they allow you to match your lighting color to your modeling era. The strips include a small potentiometer so you can adjust the brightness. For shorter cars or cabooses the strips can be cut. The red marker LEDs are on wire leads for easy placement where needed. The integral ESU decoder supports both Motorola(R) and DCC, and also works on DC analogue layouts. The operating mode is detected automatically. In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows you to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car. All effects can also be programmed once the lighting strip has been installed and the values of your DCC LED Interior Lighting Strips can be read on a programming track. Yellow 10 x 11/32" or 25.5 x .9cm More Information Item # 50709 Brand ESU Scale O, HO, TT, N Pack Size 1 MSRP $29.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less