Plastic Model Kits

The F-35 Lightning II is an ambitious 5th Generation aircraft that aims to meet the needs of different U.S. service arms via three different variants. Our model kits of the A and B variants have proven to be model fan favorites since their introduction in 2022 and 2023, respectively. We now complete the variant journey with this model assembly kit which recreates the F-35C.About the F-35CThe F-35C is a carrier-based variant designed for catapult-assisted take-off, barrier arrested recovery operations from aircraft carriers. Compared to the F-35A, the F-35C features larger wings with foldable wingtip sections, larger control surfaces for improved low-speed control, stronger landing gear for the stresses of carrier arrested landings, a twin-wheel nose gear, and a stronger tailhook for use with carrier arrestor cables. The larger wing area allows for decreased landing speed while increasing both range and payload.• Fuselage parts are newly molded excluding canopy and weapons bay doors parts.• Fine recreations of Radar Absorbent Material (RAM) are molded into fuselage surfaces.• Choose parts to recreate:- Deployed or folded wingtips (Parts can be interchanged after assembly.)- Deployed or stowed air fuel probe on the right side of nose- Open or closed arresting hook door- Open or closed canopy (Parts can be interchanged after assembly.)- Open or close weapons bay doors.- Deployed or stowed boarding ladder.• Leading-edge and trailing-edge control surfaces are depicted down. Parts to render wheel chocks are also included.• Features realistic renderings of pylons (F-35C's dedicated design) under wings and lower fuselage gun pod. (The gun pod is not attached if using RCS enhancers.)• Features realistic renderings of the following sections:- Nose undersurface side details- Y- shaped air intakes- Weapons bay inside details including depictions of wiring- Cockpit and landing gear bays- Engine nozzle (5-piece design)- Martin-Baker US16E ejection seat- RCS (radar cross section) enhancers affixed to top and bottom sections (two for each, four in total) during basic training exercises, but not in live action or more complex exercises• Choose whether to assemble the model in stealth mode (no external ordnance), air-to-air mode (missiles only), or beast mode (full ordnance).• Includes various kinds of ordnance: AIM-9X Sidewinder x2, AIM-120C AMRAAM x2, GBU-12 Paveway II x4, and GBU-31 JDAM x2.• Masking stickers for the canopy and a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) included.• Comes with decals to depict 6 marking options (4 from United States Navy and 2 from United States Marine Corps.) More Information Item # 61127 Brand Tamiya Scale 1/48 Model Lockheed Martin F-35C Lightning II Kit Type Plastic Model Kit Decals Included Skill Level Advanced (suitable for experienced modelers) Dimensions (Assembled) Length: 327 mm (12.8 inches), Wingspan: 273 mm (10.7 inches) MSRP $88.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

Revell skill level:  4 Recommended age:  12+ Scale:  1:25 Number of parts:  160 Length:  7.50 in Width:  3.25 in Height:  3.50 in Kit Features: Revell’s all-new tooling of Chevrolet’s unforgettable “squarebody” K5 Blazer in 1/25 scale. Accurate rooftop light bar, police radio, and Chief Hopper’s hat as seen in Stranger Things. The carefully detailed engine bay houses a 350-cubic-inch (5.7-liter) small-block V-8 engine. An intricately designed four-wheel-drive chassis assembly with a multi-piece frame. The multi-piece “Custom Deluxe” interior includes a simulated spare tire mounted in the cargo area. All-new decal sheet with factory-correct details and custom options Molded in white and clear with chrome plated parts and soft black tires. Paint and glue required. (not included) In the first three seasons of the wildly popular Netflix show Stranger Things, main character Jim Hopper, the Chief of Police in Hawkins, Indiana, was behind the wheel of his trusty 1985 Chevrolet K5 Blazer police cruiser as he investigated the series of strange occurrences happening in the town. More Information Item # 14558  Brand Revell Scale 1/25 Model Jim Hopper's '85 Chevy K5 Blazer - Stranger Things Kit Type Plastic Model Kit Number of parts 160 Revell Skill Level 4 Dimensions (Assembled) Length:  7.50 inWidth:  3.25 inHeight:  3.50 in MSRP $27.49 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

Revell skill level:  3 Recommended age:  10+ Scale:  1:25 Number of parts:  90 Length:  7.25 in Width:  3.49 in Height:  4.25 in Kit Features: Highly detailed 1/25-scale Volkswagen Vanagon—VW’s iconic Eighties-era T3 transporter van Volkswagen Newly tooled parts as seen in Stranger Things include the unforgettable roof-mounted Surfer Boy Pizza sign, a crochet blanket, pizza delivery bag, lower front grille, and a set of bumpers. Removable roof with detailed interior Movable side door slides open. Rear hatch can be positioned open or closed. Multi-piece horizontally opposed 2.0-liter four-cylinder rear-mounted engine. Molded in beige, grey, and clear, with soft black tires. Paint and glue required. (not included) In the popular Netflix show, Stranger Things, main character Argyle, an employee of Surfer Boy Pizza, used a customized Volkswagen Vanagon for pizza deliveries in California. Behind the wheel of his Vanagon, Argyle finds himself driving the Hawkins gang across country to Hawkins, Indiana as they help Eleven regain her powers in a bid to save the city from the wrath of monstrous Vecna. More Information Item # 14559 Brand Revell Scale 1/25 Model Argyle's VW Vanagon Surfer Boy Pizza Van - Stranger Things Kit Type Plastic Model Kit Number of parts 90 Revell Skill Level 3 Dimensions (Assembled) Length:  7.25 inWidth:  3.49 inHeight:  4.25 in MSRP $29.99 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

Add a classic slice of small-town America to your HO scale layout with the Walthers Cornerstone Glover Park Hardware. This one-story storefront kit captures a neighborhood hardware store with large display windows and a street-level entry, and it drops right into a Main Street or urban block from the steam era through today. Looking for more HO scale building kits? Browse our HO Scenery & Buildings and HO Track & Accessories. Features Easy-to-build plastic kit molded in realistic colors — minimal painting needed for a great look. Detailed one-story storefront with large display windows and a recessed entry. Versatile prototype — finish it as a hardware store, paint shop, grocer, or any small retail business. Combines with other Walthers Cornerstone Main Street structures to build a complete city block. Includes signage and detail parts for a finished, ready-to-place storefront. Assembled footprint: 7-1/8 x 5-1/2 x 2-7/8 in (18 x 13.9 x 7.3 cm). Scale: HO (1:87). More Information Brand Walthers Cornerstone Item Number 933-3465 Scale HO (1:87) Product Type Kit — Building Condition New Assembly Kit (Requires Assembly) Material Plastic Era Any Era (Steam to Modern) Dimensions 7-1/8 x 5-1/2 x 2-7/8 in UPC 616374081684 FAQ Does this kit require assembly?Yes — it's a plastic structure kit that requires assembly. It's molded in color so paint is optional, but plastic cement and a little paint give the best results. What scale is this building?HO scale (1:87), sized to match standard HO track, figures, and vehicles. What can I use this building for?It's a flexible main-street storefront — model it as a hardware store, paint shop, grocer, or any small retail business, and pair it with other Cornerstone structures for a full block. What are the finished dimensions?The assembled building measures about 7-1/8 x 5-1/2 x 2-7/8 in (18 x 13.9 x 7.3 cm).

Read more less

Add a true Santa Fe landmark to your HO scale railroad with the Walthers Cornerstone ATSF Interlocking Tower. Modeled from authentic Santa Fe standard plans, this classic tower features a stucco finish, signature ball-and-cross medallions, and a diamond-pattern shingled roof — the kind of structure that controlled junctions and crossings all across the Santa Fe system. Looking for more HO scale building kits? Browse our HO Scenery & Buildings and HO Track & Accessories. Features Authentically designed from ATSF Santa Fe standard plans. Classic interlocking tower with operator's bay window for trackside control scenes. Detailed stucco finish, ball-and-cross medallions, and diamond-pattern shingled roof. Molded in two colors plus clear glazing for easy assembly and painting. Assembled size: 2-7/8 x 4-7/8 in footprint, standing 5-1/8 in tall. Scale: HO Scale (1:87) More Information Brand Walthers Cornerstone Item Number 933-2983 Scale HO Scale (1:87) Product Type Kit — Building Condition New Assembly Kit (Requires Assembly) Material Plastic Era Steam & Transition Era Dimensions 2-7/8 x 4-7/8 x 5-1/8 in UPC 616374088102 FAQ Does this kit require assembly?Yes — it's an unassembled plastic structure kit. Plastic cement and paint are recommended but not included. Is it molded in color?Yes, it's molded in two colors with clear glazing, so it looks good even before painting. What era does this tower fit?Interlocking towers like this served the Santa Fe from the steam era through the diesel transition, so it suits most mid-20th-century layouts.

Read more less

Bring a classic roadside gas station to your HO scale layout with the Walthers Cornerstone Winner's Circle Petro. This box-style service station — the kind that sprang up coast to coast from the late 1930s through the 1950s — includes two service bays, an office, two pump islands, and three styles of gas pumps so you can dial the scene in for the 1930s, 50s, or 80s. Looking for more HO scale building kits? Browse our HO Scenery & Buildings and HO Track & Accessories. Features Complete box-style service station with two service bays and an office area. Two large roadside signs plus a sheet of colorful decal signage. Two full pump islands with three styles of gas pumps (1930s, 1950s and 1980s). Pump islands position freely so you can fit the scene to your space. Molded in color — assembly required; plastic cement and paint recommended. Assembled footprint: 4 x 6 in, about 2-1/16 in tall. Scale: HO Scale (1:87) More Information Brand Walthers Cornerstone Item Number 933-3479 Scale HO Scale (1:87) Product Type Kit — Building Condition New Assembly Kit (Requires Assembly) Material Plastic Era 1930s–1950s (Transition Era) Dimensions 4 x 6 x 2-1/16 in UPC 616374116126 FAQ Does this kit require assembly?Yes — it's an unassembled plastic structure kit. Plastic cement and paint are recommended but not included. What's included?The station building with two service bays and office, two pump islands, three styles of gas pumps, two roadside signs, and a decal sheet. What era does it fit?Box-style stations like this ran from the late 1930s into the 1950s, and the included pump variety lets you model anywhere from the 1930s to the 1980s.

Read more less

Add a hard-working countryside landmark to your N scale layout with the Walthers Cornerstone Valley Growers Elevator. This classic grain elevator includes a clapboard office, an attached wood storage bin, and positionable doors, and it accommodates both truck and rail service — a perfect centerpiece for a busy agricultural scene in the steam or diesel era. Looking for more N scale building kits? Browse our N Scenery & Buildings and N Track & Accessories. Features Tall grain elevator with attached storage building and clapboard office Positionable doors and a wood storage bin add operating detail Accommodates both truck and rail service for flexible scene-building Realistic Valley Growers Association decals included Molded in silver and clear plastic; fits steam or diesel era layouts Scale: N (1:160) More Information Brand Walthers Cornerstone Item Number 933-3251 Scale N (1:160) Product Type Kit — Building Condition New Assembly Kit (Requires Assembly) Material Plastic Era Steam / Transition / Diesel UPC 616374025398 FAQ Does this kit require assembly?Yes. It's an unassembled plastic kit. You'll need plastic cement, a hobby knife, and acrylic paint (recommended) to finish it. What scale is this?N scale (1:160) — ideal for fitting a detailed grain operation into a compact footprint. What era does it fit?It works for both steam and diesel era layouts and accommodates both truck and rail service.

Read more less

Add timeless farmland character to your HO scale layout with the Walthers Cornerstone Van Dyke Farm Windmill. This kit includes parts to build two classic wind-driven water pumps — a fixture on North American farms and ranches since the 1880s and still a common sight today. Each tower adjusts to four different heights, so you can vary the look across multiple farm, ranch, and rural scenes from a single kit. Specifications Brand Walthers Cornerstone Item Number 933-3198 Scale HO Scale (1:87) Kit Type Plastic Structure Kit (assembly required) Assembled Height Up to 8-3/4 in (22.2 cm) Footprint 1-5/8 x 1-5/8 in (4.1 x 4.1 cm) each Quantity Builds 2 windmills Era 1880s to Present (Steam, Transition & Diesel) Features Builds two complete farm windmills from a single kit Each tower is adjustable to four different heights for varied scenes Realistic 10-foot diameter blade head Includes a cement base and wood well cap for added realism Based on a North American prototype in use from the 1880s through today Easy to build and can be modified for use in N Scale Frequently Asked Questions How many windmills are in this kit?The kit includes parts to build two complete windmills, plus a cement base and wood well cap. Do I need paint and glue?Yes. This is an unpainted plastic kit that assembles with plastic cement; paint and a hobby knife are recommended for the best results. What era does it fit?Farm windmills like these have been in use since the 1880s and remain common today, so they suit steam, transition, and modern diesel-era layouts. Can I use it on an N scale layout?It is designed for HO scale, but the simple structure can be modified to look right at home in an N scale farm scene. Shop More at Squeaky's Trains Explore more HO Scale models, Buildings & Structures, and Scenery & Details.

Read more less

Classic 1950s Ford Pickup Adventure – Build Stock, Custom, or Baja Patrol!The AMT 1953 Ford Pickup Baja Patrol kit is a detailed plastic model perfect for Ford enthusiasts and experienced builders alike. With multiple build options including stock, custom, or Baja Patrol, this kit offers flexibility and creativity for your collection. Chrome parts, water slide decals, and vintage-style packaging make this kit a standout addition to any workbench. 1:25 scale model, skill level 2 (paint & glue required) Includes 155 detailed parts Build options: stock, custom, or Baja Patrol Molded in white, clear, and chrome-plated parts Black vinyl tires with metal axles Two sets of wheels and pre-lettered tires Includes remastered water slide decals Built length: 8 inches Recommended for ages 10+ More Information Brand AMT Kit Type Plastic Model Kit Scale 1:25 Model 1953 Ford Pickup Baja Patrol Skill Level 2 (Paint & Glue Required) Parts Count 155 Age Recommendation 10+ Availability Ships same or next business day Item # AMT1505 HS Code 9503.00.00 Explore more Vehicle Model Kits in stock now at Squeaky’s Trains. Frequently Asked Questions Does this kit come pre-painted? – No, it requires paint and glue for assembly. Can I build this as a stock pickup instead of Baja Patrol? – Yes, the kit includes multiple build options. What size is the finished model? – Approximately 8 inches long. Are decals included? – Yes, it comes with remastered water slide decals.

Read more less

The Walthers Cornerstone Farmer's Co-op Rural Grain Elevator is an N scale plastic structure kit that captures the look of the wooden grain elevators that lined small-town America from the 1800s right through today. The kit builds into a complete trackside scene with a main elevator, a separate storage building, and a scale house — perfect for a branch line, rural junction, or any farming community on your layout. Looking for more N scale building kits? Browse our N Scale Scenery & Buildings and N Scale Track & Accessories. Features Builds into a complete grain-handling scene: main elevator, trackside storage building, and scale house. Realistic wood-grain walls molded in appropriate colors for easy assembly with minimal painting. Separate doors and windows add depth and detail to the finished structures. Includes colorful decals representing several grain companies so you can letter it your way. Versatile prototype suits any era from the 1800s to the present day. Scale: N (1:160) More Information Brand Walthers Cornerstone Item Number 933-3238 Scale N (1:160) Product Type Kit — Building Condition New Assembly Kit (Requires Assembly) Material Plastic (Styrene) Era Any Era (1800s–Present) Assembled Size (Elevator) 4-3/8 x 5-3/8 x 6 in (11 x 13.7 x 15.2 cm) FAQ Does this kit require assembly?Yes. It's an unassembled plastic kit. Parts are molded in color so it looks great even unpainted, but glue and basic modeling tools are recommended. What's included in the kit?You get the main grain elevator, a separate storage building, a scale house, and a sheet of decals for several grain companies. Do I need to paint it?Not necessarily — the walls are molded in realistic colors. Many modelers add weathering and detail painting for a more authentic look, but it's optional. Will it fit my N scale layout?Yes. It's built to N scale (1:160) and the elevator footprint is about 4-3/8 x 5-3/8 inches, ideal for a trackside rural or small-town scene.

Read more less

HO scale Walthers Cornerstone Track Scales kit (933-3199): builds light- and heavy-duty scales plus two scale houses for any rail yard or industry.

Read more less

Walthers Cornerstone Village Pizza brings a classic two-story brick corner storefront to your HO scale Main Street — a pizza restaurant on the ground floor with apartments or offices above, just like the commercial buildings that have anchored American downtowns from the 1880s to today. Finely molded in three colors and clear plastic, it builds into a detailed centerpiece with a recessed brick entryway, a printed interior, and colorful peel-and-stick signs. Looking for more HO building kits? Browse our HO Scenery & Buildings and HO Track & Accessories. Features Two-story brick corner building — pizza restaurant below, apartments/offices above Molded in three colors and clear plastic to minimize painting Recessed brick entryway and finely detailed storefront windows Includes a printed interior, window-treatment sheet, and colorful peel-and-stick sign graphics Fits any era from the 1880s through today — small town or big city Designed to work with the Cornerstone Street System and other Cornerstone storefronts Scale: HO (1:87) More Information Brand Walthers Cornerstone Item Number 933-3469 Scale HO (1:87) Product Type Kit — Building Assembly Kit (Requires Assembly) Material Plastic Era Multi-Era (1880s through Modern) Dimensions 3-1/8 x 5-1/2 x 4-3/4" Country of Origin China Condition New UPC 616374081943 FAQ Does this kit require assembly?Yes — it's an unassembled, unpainted plastic kit. Plastic cement and paint are recommended for best results and are not included. What's included?All structure parts, a printed interior and window-treatment sheet, and colorful peel-and-stick sign graphics. How big is the finished building?It measures about 3-1/8 x 5-1/2 x 4-3/4" — a compact corner storefront that fits well on small and large layouts alike. What era does it fit?Corner brick storefronts like this have been in use from the 1880s through today, so it suits virtually any HO layout.

Read more less