Tools & Adhesives

64 products


  • Sale ESU 41010 | Premium Foam Train Service Tray | 328x 166 x 68 mm | With magnetic storage recess | HO Scale

    ESU LLC ESU 41010 | Premium Foam Train Service Tray | 328x 166 x 68 mm | With magnetic storage recess | HO Scale

    1 in stock

    The ESU Premium Foam Train Service Tray is the ideal tool for the maintenance and care of your locomotives. Two recesses are available for perfect work: The locomotive can be clamped upside down to comfortably reach the underbody of the locomotive. In the classic inclined tray, you can easily reach the sidewalls of the locomotive or set up the locomotive almost vertically, in order to achieve the interior of the locomotive well. The Premium Foam Train Service Tray consists of a soft, fine-pored foam with high restoring force. As a result, small parts such as handle bars, antennas or pantographs cannot get caught and thus reduce the possibility of damage to a minimum. The material is resistant to oil, grease and other cleaning agents. For safe storage of small parts and screws, a magnetic storage recess is available over the entire length. The Premium Foam Train Service Tray is 328mm long and can be arranged in rows, so that longer Service Trays for the maintenance of railcars can be built. WARNING:Ā This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go toĀ www.P65Warnings.ca.gov

    1 in stock

    $22.29$20.06

  • Sale Walthers Cornerstone 933-2618 | Motorized 130' Turntable - Assembled - 10-3/8" 26.3cm Overall Diameter | N Scale

    Walthers Cornerstone Walthers Cornerstone 933-2618 | Motorized 130' Turntable - Assembled - 10-3/8" 26.3cm Overall Diameter | N Scale

    1 in stock

    Sure to be the focal point of any N Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 130' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns, 2-10-2s all the way up to a 4-8-8-4 Big Boy. It'll look great at your locomotive terminal, at junctions and anywhere else large steam locomotives must be turned. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside otherĀ Cornerstone N Scale railroad buildings. 130' length typical of large tables built from 1920s on - some still in service today Must-have detail for engine terminals Holds locos up to 9-3/4" 24.7cm long - big enough for a 4-8-8-4! Layout mounting templates for pit and Cornerstone Turntable Control Box User-friendly, illustrated instructions simplify assembly Requires 9-15/16" 25.2cm mounting hole to be cut in layout for installation 10-3/8" 26.3cm overall diameter Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 80 rail installed on bridge

    1 in stock

    $269.99$256.49

  • Labelle 1001 | Complete Lubricant Set | HO, O, S, On30, Large Scale

    Labelle Labelle 1001 | Complete Lubricant Set | HO, O, S, On30, Large Scale

    1 in stock

    Includes one each Plastic Compatible Gear Lubricant, Plastic Compatible Grease with PTFE and Plastic Compatible Motor Oil. For HO, O, S, On30, Lionel, LGB and all larger size trains. Comes with 7-1/2" extension needle adapter for those hard-to-reach places. Kit Includes:Ā  #102 Micro-Gear Lube with PTFE #106 Micro Grease Lube with PTFE #107 Micro-Oil Lube Oil (Medium weight ISO 68)

    1 in stock

    $23.19

  • Sale Woodland Scenics 1185 | Easy Rock Carving Tools Woodland Scenics 1185 | Easy Rock Carving Tools

    Woodland Scenics Woodland Scenics 1185 | Easy Rock Carving Tools

    1 in stock

    Use the Easy Rock Carving Tools with Carving Plaster to carve custom rock formations. The Strata Tool helps you carve and shape large areas fast to model strata, blasted rock and other weathered and eroded outcrops. The Carving Tool has two sides - a Chisel and a Pick. Use the Chisel to carve gouges and cavities. Use the Pick to carve grooves, fine-line abrasions and striation markings. Keep your carving area free from debris with the Duster. 3 piece set Specially formulated to work with Terrain and Landscape products, these tools and adhesives are designed to simplify your modeling efforts. They are fully tested for results, safety, quality and durability.

    1 in stock

    $13.99$12.59

  • Woodland Scenics 1191 | Plaster Cloth Narrow Roll Woodland Scenics 1191 | Plaster Cloth Narrow Roll

    Woodland Scenics Woodland Scenics 1191 | Plaster Cloth Narrow Roll

    3 in stock

    Specially sized for small areas/projects, risers, inclines and road base. Using Plaster Cloth is a quick, convenient and lightweight method for making durable hard shell or terrain base. Accepts Earth Colors(TM) Liquid Pigment, plaster castings and scenery materials easily. Use to fill gaps around rocks, tunnels and terrain seams. Packaged in a resealable bag. 1 roll/pkg 4 in x 5 yd, 5 ft2Ā (10.1 cm x 4.57 m, 46.4 dm2)

    3 in stock

    $4.59

  • Labelle 107 | Plastic-Compatible Motor Oil - 1/2oz 14.8mL | HO & Large Scale

    Labelle Labelle 107 | Plastic-Compatible Motor Oil - 1/2oz 14.8mL | HO & Large Scale

    1 in stock

    Labelle Industries No. 107 Plastic Compatible Motor Oil 2019 formula is a medium-weight lubricant for HO and larger scale models with high-torque motors. With its temperature range of -45F to +450F it's more than suitable for model trains as well as other radio-control vehicles and drone shafts. It is also USDA Food Grade and Kosher certified and contains no chemicals that require Proposition 65 notices in California. Other uses of No. 107 Plastic Compatible Motor Oil include Other uses: fractional horsepower motors, tiny bearings, computer fans, computer printed bearings, sewing machines, large fishing reel mechanisms, drawer slides, door and window locks, precision instruments, large clock mechanisms and small locks of all sizes.

    1 in stock

    $7.99

  • Deluxe Materials AD92 | Precision Plastic Glue

    Deluxe Materials Deluxe Materials AD92 | Precision Plastic Glue

    2 in stock

    Precision Plastic Glue from Deluxe Materials is a low odor, liquid plastic cement with pinpoint applicator. It's a hazard free, non-toxic, plastic cement with a needle applicator. The glue is designed to be easy to apply, and with a 10 second working time for positional adjustment, it's ideal for all types of styrene plastic kits. Furthermore, it is chemically engineered to resist needle clogging and not thicken in use. Precision Plastic Glue is packed in an easy to hold, clear plastic bottle for glue level visibility and an integrated detachable needle for safety.Ā  In Pinpoint Applicator Bottle .9oz 25g

    2 in stock

    $10.49

  • Deluxe Materials AD55 | Glue 'n' Glaze Film-Forming Polymer

    Deluxe Materials Deluxe Materials AD55 | Glue 'n' Glaze Film-Forming Polymer

    1 in stock

    Deluxe Materials AD55 Glue 'n' Glaze is a multi-scale polymer that forms an ultra-strong, waterproof film. It has unbeatable gap-filling capabilities and superior adhesion, making it ideal for a range of modeling tasks. Its durability, flexibility and non-toxicity make it an essential modeling tool.

    1 in stock

    $7.98

  • Woodland Scenics 1203 | Plaster Cloth | Multi Scale Woodland Scenics 1203 | Plaster Cloth | Multi Scale

    Woodland Scenics Woodland Scenics 1203 | Plaster Cloth | Multi Scale

    1 roll/pkg 8" w x 5 yd l, 10 ft2Ā (20.3 cm x 4.57 m x 92.9 dm2)

  • Woodland Scenics 1432 | 2" Foam Nails

    Woodland Scenics Woodland Scenics 1432 | 2" Foam Nails

    1 in stock

    Use Foam Nails to temporarily pin track, foam or other products to your layout. This package contains 75 pieces.

    1 in stock

    $5.95

  • ESU 51840 | SignalPilot Accessory DCC Decoder for Signals | Multi Scale

    ESU LLC ESU 51840 | SignalPilot Accessory DCC Decoder for Signals | Multi Scale

    1 in stock

    SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 is multi-protocol and can be used with workstations according to the MƤrklinĀ® MotorolaĀ® system (e.g. 6021, Central StationĀ® or Mobile StationĀ®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailComĀ®, CVs can also be read out. Functioning The SwitchPilot 3 can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 exit pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case:In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has elapsed prevents the burning of magnetic article drives.At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps.In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Ge- rade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for glow lam pen simulation).With the switch 3 mode switch, you can switch all output pairs together to the "k83" or "k84" modes at lightning speed, regardless of how they are configured. Feedback Since the SwitchPilot 3 is RailComĀ®-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal "partner", the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly! Set The SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailComĀ® CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. A"Programming" with the help of your control panel is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51840 Brand ESU Scale Multi WARNING:Ā This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go toĀ www.P65Warnings.ca.gov

    1 in stock

    $68.25

  • ESU 51831 | SwitchPilot 3 Plus Accessory Decoder - For 8 Accessories | Multi Scale

    ESU LLC ESU 51831 | SwitchPilot 3 Plus Accessory Decoder - For 8 Accessories | Multi Scale

    1 in stock

    SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 Plus is multi-protocol and can be used with control panels according to the MƤrklinĀ® MotorolaĀ® system (e.g. 6021, Central StationĀ® or Mobile StationĀ®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailComĀ®, CVs can also be read out. Functioning The SwitchPilot 3 Plus can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 exit pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case: In pulse mode, the output is switched on as soon as a switching command is received. Since the output automatically switches off again as soon as a time stored in the decoder has been reached, a burn-through of magnetic articles is prevented. At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps. In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Gerade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for incandescent lamp simulation). Set The SwitchPilot 3 Plus can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailComĀ® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51831 Brand ESU Scale Multi WARNING:Ā This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go toĀ www.P65Warnings.ca.gov

    1 in stock

    $68.25

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account