Power your HO railroad's flagship streamliners with these superb replicas of EMD's famed E8 and E9 diesels. Introduced in 1948 with the new 567B prime mover, production contiued until 1954 when the virtually identical E9 was introduced with the more powerful 567C prime mover. Powerful, reliable and economical, EMD E units handled premiere long-distance trains for decades, with many ending their long careers in commuter service and ocassionally handling fast freight trains. Fully assembled and ready for service, features include: One time run of these roadnumbers, order now - limited quantity available! Available with LokSound 5 for DCC or DC layouts Road- and era-specific details Both units powered - matching individual A units available separately Rugged and reliable WalthersProto drive 21-pin DCC plug Formed wire grab irons and handrails Photo-etched lift rings Cab interior w/seats and figures All-wheel drive and electrical pickup Constant and directional LED lights Correct size RP-25 metal wheels Proto MAX(TM) metal knuckle couplers  Road-specific features of this WalthersProto replica include: Nathan five-chime (all forward) air horn Single horizontal sealed-beam headlight Working backup light Flush number boards Removed skirts Freight pilot Southern-style MU bracket 4-hose MU set at left and right Photo-etched E8A-style Farr air grilles Dynamic brake with 48" fan Winterization hatches w/levers Single offset steam generator Rooftop air reservoirs w/piping Round spark arrestors Rectangular air vent Roller bearing sideframes Wheel slip hubs Speed recorder Southern-style left and right water tanks More Information Item # 920-42920 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Southern Road Number 6902 & 6910

Read more less

PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell

Read more less

PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell

Read more less

WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, order now - limited quantity available Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector ESU Sound for DCC and DC layouts featuring: - 4 function outputs with brightness control by CV- Fully DCC compatible- 14, 28, 128 speed steps- Dual mode DC and DCC- 4 air horns changeable by CVs- 2 bells changeable by CVs- Full 8-notch prime mover sounds- Compressor- Dynamic brake Same powerful drive as WalthersProto(R) locos featuring - Five-pole skew-wound motor- 14:1 gear ratio- Helical-cut gears for quiet operation and easy multiple unit operation- All-wheel drive and electrical pickup- Heavy die-cast metal chassis- Constant and directional LED lights PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:Horns: CV163 = 0 - Nathan K5LH (default)CV163 = 1 - Nathan K5HLLCV163 = 2 - Nathan K5HCV163 = 3 - Nathan K5LLABells: CV164 = 0 - Graham White E-Bell (default)CV164 = 1 - GE Steel Bell

Read more less

This Walthers Trainline HO Scale Flatcar is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar include molded details that stand up to handling during operation and realistic paint schemes for good looks. The Flatcar is part of the large line of Trainline cars and locomotives.   Colorful paint and lettering schemes Fully assembled, ready to run Use with any HO Scale train set Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

This Walthers Trainline HO Scale Flatcar is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar include molded details that stand up to handling during operation and realistic paint schemes for good looks. The Flatcar is part of the large line of Trainline cars and locomotives.  Colorful paint and lettering schemes Fully assembled, ready to run Use with any HO Scale train set Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

This Walthers Trainline HO Scale Flatcar is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar include molded details that stand up to handling during operation and realistic paint schemes for good looks. The Flatcar is part of the large line of Trainline cars and locomotives.   Colorful paint and lettering schemes Fully assembled, ready to run Use with any HO Scale train set Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

This Walthers Trainline HO Scale Flatcar is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar include molded details that stand up to handling during operation and realistic paint schemes for good looks. The Flatcar is part of the large line of Trainline cars and locomotives.   Colorful paint and lettering schemes Fully assembled, ready to run Use with any HO Scale train set Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

This Walthers Trainline HO Scale Flatcar is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar include molded details that stand up to handling during operation and realistic paint schemes for good looks. The Flatcar is part of the large line of Trainline cars and locomotives.   Colorful paint and lettering schemes Fully assembled, ready to run Use with any HO Scale train set Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

A fun addition to HO train sets, these rugged WalthersTrainline Gondolas feature: Fully assembled, ready for fun! Built tough for years of dependable service Add to the fun of any HO train set Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less