$25 to $50

One of the timeless ready-to-fly rockets from Estes, the Athena model rocket kit is one of the coolest model rockets. It comes fully assembled which means you get to the flying field quick. So grab a friend and get ready to have some fun! From the tip of its stretched nose, to its rear engine-retainer hook, the 16-inch Estes XTREME is a marked model that even novice rocketeers can build quickly and easily. Designed around an Estes BT-20 body tube, with surface mounted, laser-cut card-stock fins, and an old-school engine-mount block; this traditionally configured three-fin model rocket achieves exceptional performance on a range of Estes engines, from 1/2 A to C. The narrow, swept fins are precision shaped for maximum stability and minimum air resistance. SKILL LEVEL: Beginner RECOMMENDED ENGINES: A8-3, B4-4, B6-4, C6-5 PROJECTED ALTITUDE: Athena: 700 ft. (213 m) on a C6-5Xtreme: 1600 ft. (488 m) on a C6-5 Overview This starter set includes everything you need to launch the Athena and Xtreme rockets. It's designed to take a beginner rocketeer, build up their skills, and bring them deep into the world of rocket science. This starter set includes the launch pad, the launch controller, 2 A8-3 motors, 4 starters, 4 plugs, and 12 sheets of recovery wadding. Everything you need to experience an incredible launch day. The Athena is a Beginner's quick building rocket kit that requires no previous building experience and no paint. The Extreme is an Intermediate rocket kit that requires moderate assembly which includes gluing and painting. This Estes Rocket Starter Set includes Port-Pad II Launch Pad and Electron Beam Launch Controller 2 Engines with Starters and Plugs for 2 Launches Recovery Wadding for 2 Launches 1 Beginner build rocket and 1 Intermediate build rocket Everything is included except AA batteries, adhesives & paint What You Need to Build Athena: Pre-Built, No Assembly Required - Xtreme: Scissors, pencil, ruler, yellow glue, hobby knife, masking tape, clear tape, paint (black). Technical Specifications Recommended Engines: A8-3, B4-4, B6-4, C6-5 Launch System Porta-Pad II Projected Max Altitude: Athena: 1125 ft. (343 m) Xtreme: 1600 ft. (488 m) Recovery System: 12 in. (30.5 cm) Parachute Length: Athena: 17 in. (43.2 cm) Xtreme: 16.8 in. (42.7 cm) Diameter:  Athena: 0.98 in. (25 mm) Xtreme: 0.74 in. (19 cm) Weight:  Athena: 1.4 oz. (39.7 g) Xtreme: 0.8 oz. (22.7 g) Fin Material: Molded Plastic More Information Item # 5304 Brand Estes Rockets Model Athena X Starter Set Skill Level Beginner Dimensions Length: Athena: 17 in. (43.2 cm) Xtreme: 16.8 in. (42.7 cm) Diameter:  Athena: 0.98 in. (25 mm) Xtreme: 0.74 in. (19 cm) Weight:  Athena: 1.4 oz. (39.7 g) Xtreme: 0.8 oz. (22.7 g) MSRP $49.49 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Downloads Instructions - Athena, Instructions - Xtreme This product recommended for children ages 10+ with adult supervision for those under 12, and rocketeers of all ages.

Read more less

Bring realism and detail to your transload facilities with this extensive set of pavement and track accessories. From concrete to metal to composite materials, these details will enhance your scenes with all you need to assist loading and unloading operations. Molded in tan plastic, the set includes: 12x Pavement sections 8-13/16 x 4-7/16 x 1/8" (22.4 x 11.2 x 0.4cm) 12x Cement drip pan center sections 4-1/8 x 1-1/2 x 1/8" (10.5 x 3.8 x 0.4cm) 8x Cement drip pan end sections 11/16 x 1-1/2 x 1/8" (1.8 x 3.8 x 0.4cm) 4x Composite track pan sets 2-1/2 x 1-3/8 x 1/16" (6.2 x 3.5 x 2cm) 4x Metal track pan sets 2-11/16 x 1-1/2 x 1/16" (6.8 x 3.8 x 2cm) 4x Heavy duty cement crossings 4-1/8 x 1-1/2 x 1/8" (10.5 x 3.8 x 0.4cm) 6x Inner and Outer Track Walkways 8-13/16 x 1-5/16 x 1/16" (22.4 x 3.33 x 2cm) More Information Item # 4186 Brand Walthers Cornerstone Scale HO MSRP $31.98 Release Date March 2025

Read more less

These colorful WalthersMainline Pacific Car and Foundry 50' Insulated boxcars are right at home on HO Scale layouts from the 1960s to 2000s. Based on class RBL prototypes with insulation and load restraints, the prototypes were shipper favorites for food, beverages, packaged chemicals and finished wood products. Ready for service, each model featThese colorful WalthersMainline Pacific Car and Foundry 50' Insulated boxcars are right at home on HO Scale layouts from the 1960s to 2000s. Based on class RBL prototypes with insulation and load restraints, the prototypes were shipper favorites for food, beverages, packaged chemicals and finished wood products. Ready for service, each model features: As-built version with high ladders and see-through Apex running boards Correct Plate B dimensions: 50' 8-1/4" Long over endsills 10' Wide 15' Tall 9' Youngstown plug doors Detailed brake gear Simulated Hydra-Cushion cylinder detail and extended draft gear Late improved Dreadnaught ends Stanray diagonal panel roof Riveted sides 70 ton roller bearing trucks Correct 33" turned-metal wheel sets Proto MAX(TM) metal knuckle couplers This is a one-time run of these roadnumbers. More Information Item # 2870 Brand WalthersMainline Scale HO Type 50' PC&F Insulated Boxcar  Road Name Union Pacific(R) Road Number 499148 MSRP $34.98

Read more less

This Bachmann HO Scale Silver Series Track-Cleaning Tank Car is based on freight cars designed to haul a wide variety of liquid loads. Tank cars have remained a crucial element of freight railroading since the pioneer era, hauling water, oil, and other commodities that were invaluable for shaping the nation. This tank car model represents some of the last single-dome examples built with a riveted tank design, which were delivered between the late 1920s and early 1940s and operated into the 1980s. Found across North America, our model represents cars in their heyday, when they served a wide selection of private owners with eclectic names and colorful paint schemes. The Bachmann Single-Dome Tank Car features a prototypical, detailed body, separately applied ladders, and metal wrap-around grab irons. Other features include blackened metal wheels with RP25 contours for operation on Code 70 and larger rail, and body-mounted E-Z Mate(R) Mark II couplers. The Track-Cleaning Tank Car features a dry cleaning system with a reusable track cleaning pad. (Track Cleaning Replacement Pads, Item #160-16949, are available separately.)  More Information Item # 16301 Brand Bachmann Scale HO MSRP $29.50   WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

The Train Control Systems KA4-P Keep-Alive® is a compact stay-alive capacitor pack that feeds backup power to your DCC decoder whenever the wheels lose contact with the rails. No more stalling on dirty track, dead frogs, or insulated turnouts — the KA4-P keeps a locomotive running with its lights and sound on for roughly 6 to 20 seconds during a power interruption, depending on the locomotive and motor efficiency. This is the harness-equipped version: it ships with a 2-Pin Quick Connector Harness that plugs straight into any decoder with a compatible 2-pin Keep-Alive socket, such as the TCS T4 and other current TCS decoders — no soldering to the decoder required. Electrically it works in any scale, and its tiny .52" footprint tucks easily into HO and larger locomotives. Browse more decoder add-ons in our DCC Accessories collection, shop the full Train Control Systems lineup, or pair it with a new sound decoder from our DCC Decoders collection. Features Keep-Alive® stay-alive capacitor pack eliminates stalling on dirty track, dead frogs, and insulated rail joints. Powers an HO locomotive with headlights on for approximately 6–20 seconds during a power interruption. Includes a 2-Pin Quick Connector Harness — plugs into the TCS T4 and other decoders with a compatible 2-pin socket, no decoder soldering needed. Ultra-compact: just .52" x .52" x .45" (13.22 x 13.22 x 11.55 mm) — fits HO and larger locomotives. Works with any scale and any DCC system; pairs with TCS and most other-brand decoders that accept an external keep-alive. More Information Brand Train Control Systems (TCS) Item Number 2005 (KA4-P) Type Keep-Alive / Stay-Alive Capacitor Pack Connection 2-Pin Quick Connector Harness Dimensions .52" x .52" x .45" (13.22 x 13.22 x 11.55 mm) Hold-Up Time ~6–20 sec (HO, lights on) Scale Any Scale (HO and larger recommended) Condition New UPC 879508007848 FAQ What does a Keep-Alive actually do?It stores an electrical charge and feeds it to your decoder when track power drops out, so the locomotive keeps moving and its lights and sound stay on across dirty track, frogs, and gaps. Will the KA4-P plug into my decoder?The included 2-pin harness plugs into TCS decoders with a compatible Keep-Alive socket (such as the T4) and most current TCS decoders. For decoders without a 2-pin socket, you can solder the leads to the decoder's keep-alive pads — check your decoder's manual first. What scales can use it?Electrically it works in any scale. Its small size suits HO and larger; in N scale it fits wherever there is room in the shell or tender. How long will it keep my loco running?Expect roughly 6 to 20 seconds with headlights on for a typical HO locomotive, depending on motor efficiency and current draw.

Read more less

Protect motorists along your HO Scale railroad with the SceneMaster Grade Crossing Signal Controller. Designed to provide a realistic flashing rate with all SceneMaster Crossing Signals (each sold separately) the unit comes fully assembled and ready to use on DC-powered layouts*. Additonal features include: Controls up to 4 signals Includes 4 optical sensors Fully assembled control unit ready to use on DC layouts Simple plug-in wiring connections Operates on 18 volt AC from power pack accessory terminals Complete installation and hook up instructions included *PLEASE NOTE: This unit is only for use on DC layouts - DCC systems can damage the controller.

Read more less

The prototypes for bulk oil distributors like the Walthers Cornerstone HO Scale Interstate Fuel and Oil have long been important for every railroad. At home in cities and towns, dealerships like this distribute fuel oil, gasoline and other products locally. This structure kit includes horizontal and vertical storage tanks, above-ground piping, pump house with header stand to unload tank cars, truck loading rack and corrugated metal office. Like the prototypes, the various pieces on Interstate Fuel and Oil can be arranged to fit available space. A gas pump, oil drums and other details are also provided. Interstate Fuel and Oil is one of many Cornerstone HO Scale industry kits.  Realistic corrugated metal textured plastic walls Arrange to fit available space on your layout Decal signs Molded in appropriate colors The structures in the Interstate Fuel and Oil kit measure: Loading Rack: 7 x 5-3/4" or 17.7 x 14.6cm Office: 5-3/4 x 4-1/2" or 14.6 x 11.4cm Pump House: 1-1/2 x 1-1/4" or 3.8 x 3.1cm Upright Tanks: 4 x 2" or 10 x 5cm

Read more less

Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).12 SMAILs per pack. Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

The SoundTraxx 851001 is the MC1Z102P6 DCC mobile decoder — a motor and lighting decoder without sound, for Z and N scale locomotives. It is rated 1 amp and connects by 6-pin nem651 plug. As an MC1 series decoder it operates on DCC only — it needs a command station and will not run on a plain DC power pack. Motor control is SoundTraxx Hyperdrive. Features DCC operation — requires a DCC command station 14 Hyperlight lighting effects across 2 function outputs — Mars Light, Pyle National Gyralite, single and dual strobes, Western-Cullen D312 rotary beacon, Prime Stratolite, Type I and II ditch lights with grade-crossing logic, dimmable headlight, Dyno-Light and FRED Rule 17 or directional lighting control, grade-crossing timers, adjustable flash rate and LED brightness correction Hyperdrive motor control for smooth low-speed running NMRA DCC compliant, made in Durango, Colorado More Information Item Number: SoundTraxx 851001 Model: MC1Z102P6 Type: Mobile decoder — motor and lighting, no sound Scale: Z and N scale Decoder Size: 13 x 9 x 3mm Connection: 6-pin NEM651 plug Max. Motor Stall Current: 1A Function Outputs: 2 (100mA each) Operating Modes: DCC only Max. Track Voltage: 22V Motor Control: Hyperdrive Shop the full SoundTraxx range, compare every DCC decoder we stock, or find install parts in DCC wiring. Want engine sound as well? Look at the sound decoders instead — this one is motor and lights only. FAQ Does this make engine sound?No. Mobile decoders drive the motor and lights only. For sound, choose a Tsunami2, Blunami or Econami sound decoder. Will it run on my DC power pack?No. This is an MC1 series decoder and is DCC only — it needs a command station. If you need DC too, choose an MC2 series decoder such as the 852002 or 852003. What does the model number mean?MC1Z102P6 breaks down as: MC1 series (DCC only), Z for Z and N scale, 1 amp, 02 function outputs, and the connector type. Will it fit my locomotive?It measures 13 x 9 x 3mm and connects by 6-pin nem651 plug. Check that against your locomotive before ordering — the other MC decoders use different connectors and sizes.

Read more less

Paint an entire miniature — base, shade, and highlight — in a single coat. The Army Painter Speedpaint Starter Set 2.0 gives you ten of the reformulated one-coat acrylics that made Speedpaint famous, and the 2.0 formula stays put once dry, so you can layer or recoat without reactivating the paint underneath. It's a fast way to get figures, vehicles, and structures on your layout looking finished instead of bare plastic. Painting people and vehicles for your layout? Browse our Figures & Vehicles and Scenery collections. Restocking singles or reviving older bottles? Grab spare Army Painter Mixing Balls. Add Speedpaint Medium for glazes and softer shading, and a Wet Palette to keep it all workable for hours. What's Included Item Qty Speedpaint 2.0 colors, 18ml (9 colors + 1 metallic) 10 Hobby basecoating brush 1 Painting guide 1 Stainless mixing balls (pre-loaded in every bottle) 2 per bottle Features One-coat painting: base color, rich shading, and highlights in a single application over primer. Speedpaint 2.0 formula dries hard and won't reactivate — layer, recoat, or drybrush right over it. Water-based acrylic that flows into recesses and self-shades detailed castings. Every 18ml bottle ships with two rust-proof stainless steel mixing balls for fast, thorough shaking — spares available for the rest of your paint rack. Includes a free basecoating brush and painting guide — everything you need to start tonight. Scale-independent: perfect for model railroad figures, vehicles, and structures in any scale, plus tabletop miniatures. More Information Brand The Army Painter Item Number WP8059P Product Type Acrylic Hobby Paint Set Bottle Size 18ml each (10 bottles) Scale Any scale Condition New FAQ Do I need to prime first?Yes — Speedpaint works best over a light primer (white or light grey shows the colors brightest). One coat over primer gives you base, shade, and highlight at once. How is Speedpaint 2.0 different from the original?The 2.0 formula dries insoluble, so a second coat or layered acrylics won't reactivate and lift the paint underneath. It also shades more consistently on large flat surfaces. Is this good for model railroad use?Absolutely — it's one of the fastest ways to paint unpainted figure sets, vehicle loads, and structure details in any scale. The self-shading effect adds instant depth on small castings. Can I mix Speedpaint with regular acrylics?Speedpaints are best used as-is or thinned with Speedpaint Medium; over-thinning with water weakens the one-coat shading effect. You can paint standard acrylics over cured Speedpaint 2.0 freely.

Read more less

Add a staple of the coal industry to your HO Scale railroad with this WalthersMainline 50’ Bethgon Coalporter Coal Gondola, decorated for CSX #380695. Built by Bethlehem Steel’s Johnstown American Corporation, the Bethgon’s all-aluminum body and unique trough-style bottom maximize coal-hauling capacity. With no bottom discharge chutes, these cars unload by rotary dump and run in long unit trains across the modern North American network. Looking for more HO rolling stock or track? Browse our HO Scale Trains & Track and HO Track, Tools & Accessories collections. Features Ready-to-run 50’ Bethgon Coalporter gondola All-aluminum prototype with trough-style bottom for maximum coal capacity Crisply printed graphics and legible stencils on car sides and ends Individually molded and applied internal bracing Scale 36" diameter turned metal wheels Genuine Proto MAX metal knuckle couplers Add your own coal load (Chooch flexible loads sold separately); pairs with the Cornerstone Rotary Dumper (933-4170) Appropriate for layouts set from the 1970s to the present day Scale: HO Scale (1:87) More Information Brand WalthersMainline Item Number 910-57205 Scale HO Scale (1:87) Car Type 50’ Bethgon Coalporter Gondola Road Name CSX Road Number #380695 Era Modern (1970s–Present) Coupler Knuckle (Proto MAX) Wheels 36" Metal Condition New UPC 616374231843 Frequently Asked Questions Does the car come with a coal load?No — it’s modeled empty so you can add your own. Chooch flexible coal loads (sold separately) drop right in. Are couplers and wheels installed?Yes. It’s ready to run with genuine knuckle couplers and 36" metal wheelsets already mounted. What scale and era is this?HO Scale (1:87), appropriate for layouts from the 1970s to the present day. Can I run several together?Absolutely — Bethgons run in long unit coal trains. We stock matching road numbers so you can build a realistic consist.

Read more less

Add a staple of the coal industry to your HO Scale railroad with this WalthersMainline 50’ Bethgon Coalporter Coal Gondola, decorated for CSX #379877. Built by Bethlehem Steel’s Johnstown American Corporation, the Bethgon’s all-aluminum body and unique trough-style bottom maximize coal-hauling capacity. With no bottom discharge chutes, these cars unload by rotary dump and run in long unit trains across the modern North American network. Looking for more HO rolling stock or track? Browse our HO Scale Trains & Track and HO Track, Tools & Accessories collections. Features Ready-to-run 50’ Bethgon Coalporter gondola All-aluminum prototype with trough-style bottom for maximum coal capacity Crisply printed graphics and legible stencils on car sides and ends Individually molded and applied internal bracing Scale 36" diameter turned metal wheels Genuine Proto MAX metal knuckle couplers Add your own coal load (Chooch flexible loads sold separately); pairs with the Cornerstone Rotary Dumper (933-4170) Appropriate for layouts set from the 1970s to the present day Scale: HO Scale (1:87) More Information Brand WalthersMainline Item Number 910-57203 Scale HO Scale (1:87) Car Type 50’ Bethgon Coalporter Gondola Road Name CSX Road Number #379877 Era Modern (1970s–Present) Coupler Knuckle (Proto MAX) Wheels 36" Metal Condition New UPC 616374231829 Frequently Asked Questions Does the car come with a coal load?No — it’s modeled empty so you can add your own. Chooch flexible coal loads (sold separately) drop right in. Are couplers and wheels installed?Yes. It’s ready to run with genuine knuckle couplers and 36" metal wheelsets already mounted. What scale and era is this?HO Scale (1:87), appropriate for layouts from the 1970s to the present day. Can I run several together?Absolutely — Bethgons run in long unit coal trains. We stock matching road numbers so you can build a realistic consist.

Read more less