$50 to $100

The SoundTraxx 886803 is a TSU-21PNEM8 Tsunami2 digital sound decoder with the Electric sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the 21-pin MTC plug-in decoder, rated 1A and suited to HO scale and larger. Dynamic Digital Exhaust reads the load on the motor and notches the traction motor up and down on its own, so the locomotive sounds like it is working for its train. Features AC traction motor sound with pantograph up/down (interlocked so the loco will not move with the pantograph down), trolley bell, stop-request bell, pneumatic doors and cab chatter Dynamic Digital Exhaust (DDE) matches traction motor sound to the load on the motor automatically Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 886803 Model: TSU-21PNEM8 Tsunami2 Sound Set: Electric Electric Scale: HO scale and larger Decoder Size: 30.5 x 15.5 x 6.5mm Connection: 21-pin NEM (21MTC) plug Max. Motor Stall Current: 1A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Electric sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 30.5 x 15.5 x 6.5mm and connects by 21-pin nem (21mtc) plug. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

Drive 'n Dine sets a nostalgic scene on any layout and features loads of details. Two carhops on skates deliver tasty treats, and a man in a bright red convertible waits for his order. Additional details include a vintage styled signage, soda straw supports for the awning, benches, picnic table, several bicycles, light poles and more! See photos for footprint. This structure comes with pre-installed LED lighting made for use with the Just Plug® Lighting System. 20mA RoHS Compliant Set contains 2 pieces. Colors may vary from actual product. More Information Item # BR4929 Brand Woodland Scenics Scale N Type Assembled Building Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New

Read more less

The Walthers Cornerstone Turntable Advanced Control Module makes it possible to operate your Motorized Turntable using DCC, serial UART, keypad or switch contacts. For DCC applications this circuit will function as a stationary decoder with no CV or programming required. The Turntable Advanced Control Module includes the circuit, Connection cable and complete instructions. Adds DCC, serial UART, keypad and switch contact input modes including: DCC control using stationary decoder protocols Numeric Keypad Button per track Rotary selector switch Control box emulation Serial Rx/Tx UART port   Digital outputs for remote dual digit display and controlling track power relays to selectively power service tracks automatically Measures: 2-3/4" (70mm) x 4-3/16" (107mm) Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately:   HO Scale 90' 933-2860 HO Scale 110' 933-2851 HO Scale 130' 933-2859 N Scale 130' 933-2618

Read more less

Kit includes: 3 Warm White Stick-On LEDs Minimum 15" wire with Just Plug connector Miss Molly's Diner welcomes you with a spoonful of some good home cookin'. This HO Scale Built-&-Ready® is styled like a train car eatery, hand-painted and authentically weathered for realism. It features a detached, classic sign, a menu board and other details for custom placement. The ready-made structure has an eye-catching printed interior complete with booths, a kitchen and other authentic diner features. This local establishment is open for business on your layout right of the package. Bring the diner to life with both interior and exterior pre-installed LED lighting made for use with the Just Plug® Lighting System. 30mA RoHS Compliant Pair this building with Just Plug Spotlights to highlight details like the detached, classic sign.

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

Add refinery operations to your HO Scale layout with the Walthers Cornerstone United Petroleum Refining kit. Designed to capture the realism of a prototype oil refinery, this impressive model includes a main fractionating tower, furnace, piping, and heat exchangers. With photo-etched brass handrails, ladders, and detailed platforms, this facility adds depth and realism to any industrial scene from the 1950s to today. Easy-to-build plastic kit with realistic detail Fits most HO Scale industrial layouts Main fractionating tower, furnace, piping, and heat exchanger details Includes multiple piping units for complex refinery scenes Decal warning signs included Photo-etched brass handrails and ladders for added realism Molded in appropriate base colors More Information Brand Walthers Cornerstone Kit Type Plastic Building Kit Scale HO Scale Model United Petroleum Refining TCA Grading C-10 Mint - Brand New Availability Ships same or next business day MSRP $59.98 Item # 933-3705 Made In China HS Code 9503.00.00 Browse more HO Scale Plastic Building Kits, explore the full HO Scale Collection, or shop more Walthers Cornerstone kits to expand your layout. Frequently Asked Questions Does this kit come pre-assembled? No, this is a plastic building kit that requires assembly. What’s included in the kit? A fractionating tower, furnace, piping, heat exchangers, ladders, platforms, warning decals, and brass handrails. What era does this fit? Suitable for layouts from the 1950s to today. How large is the finished model? Measures 13-1/2" L x 8-1/4" W x 15" H (34.3 x 21.3 x 38.1 cm). Can I combine this with other kits? Yes, it’s designed to be combined with other Walthers Cornerstone industrial kits.

Read more less

This bundle of HO-Scale Just Plug® Classic Vehicles fills up one Light Hub (included). Each 40s/50s style Vehicle includes a driver, LED headlights and taillights. These Vehicles have custom colors only available in the Value Packs. Give the illusion of movement on your layouts with Just Plug® Vehicles. Bulk up on savings over buying individually with Value Packs. Pair with Just Plug® Traffic Lights and Just Plug Street Lights. Includes:  1 Midnight Ride 1 Blue Coupe 1 Comfy Cruise 1 Downtown Drive 4 Linker Plugs 1 Light Hub CTRL Port Plug (installed) 1 Double-sided Mounting Tape 2 Mounting Screws Illustrated Instructions   More Information Item # JP5908 Brand Woodland Scenics Scale HO MSRP $119.99  

Read more less

The Digitrax SE74 is the signal and turnout decoder that ties a working signal system to your LocoNet. It drives signal masts, throws four turnouts, reads eight input lines for sensors and local push buttons, and stores eight routes of eight entries each - which means interlockings and crossovers can be set from a single command instead of one turnout at a time. Signalling your layout? Browse our DCC Accessories, DCC Wiring, and the full Digitrax range. Features Fully connectorized installation - signal driver cables and turnout leads plug in, so a signal bay can be built on the bench and dropped under the layout. Four turnout outputs, configurable for solenoid machines (Peco, Atlas, Kato) or slow-motion machines such as the Tortoise. 8 input lines for block detectors, sensors and local control buttons at the fascia. 8 system routes with 8 entries each - throw a whole crossover or interlocking from one command. Optional DCC 9-aspect control mode, including Lunar aspects, for prototypical signalling. Setup via option switches or LocoNet programming, with Series 7 style configuration from a DT602 throttle. More Information Brand Digitrax Item Number SE74 Product Type DCC Signal and Turnout Decoder Scale All scales Turnout Outputs 4 - solenoid or slow-motion Input Lines 8 Routes 8 routes x 8 entries Signal Aspects Up to 9-aspect DCC mode including Lunar Connection LocoNet, connectorized signal driver cables Condition New FAQ What else do I need to get signals running?The SE74 plus signal masts and a way to carry the connections to them. Most installs use a Signal Driver Cable Kit (SDCK) for the ribbon cable and sockets, plus mast bases and mounting hardware. You also need occupancy detection - the SE74 displays aspects, it does not detect trains on its own. Can it drive slow-motion turnout machines?Yes. The four turnout outputs are configurable for either solenoid machines such as Peco, Atlas and Kato, or stall-motor machines such as the Tortoise. What are routes and why do they matter?A route sets several turnouts at once from a single command. With eight routes of eight entries you can line an entire crossover or interlocking with one button press instead of throwing each point individually. Do I need a Digitrax command station?Yes for full configuration - the SE74 is a LocoNet device and is set up over LocoNet, with the most convenient programming from a DT602 throttle.

Read more less

From the early years of the 20th century to the present, buildings like the Walthers Cornerstone American Hardware Supply have been a familiar part of big city skylines. Just about any manufacturing operation could be found here over the years. You'll find this building is easy to modify for your needs too! Optional loading doors, windows or solid brick panels are provided for the ground floor so you can give your model a unique appearance. A modular design makes it easy to combine kits for a larger building, and there are many possibilities for kitbashing too. A concrete railroad loading dock and colorful signs for a variety of businesses round out this versatile structure. As shown American Hardware Supply measures: 8-1/4 x 5-3/4 x 6-7/8" 20.9 x 14.6 x 17.4cm American Hardware Supply is just one of a wide variety of Cornerstone N Scale industrial buildings. Classic 1900s design Brick construction Fits steam or diesel-eras Molded in appropriate color More Information Item # 933-3253 Brand Walthers Cornerstone  Scale N Type Building Kit Size 8-1/4 x 5-3/4 x 6-7/8" or 20.9 x 14.6 x 17.4cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

The Kato 176-6124 brings the modern Chicago Metra commuter scene to N scale with the MotivePower Industries MP36PH-3S in METX road number 424 — the 2020 release in gray, blue, orange, and black-roof livery. This is the Standard DC analog version (DCC ready), built on Kato's renowned 5-pole motor chassis with directional headlights and illuminated number boards for crisp push-pull operation. Looking for more N Scale locomotives? Browse our N Scale Trains & Track and N Scale Track & Accessories. Features Heavy-duty 5-pole motor with dual brass flywheels and all-wheel drive — engineered to pull a 10-car bi-level consist up a 4% grade Directional LED headlights and illuminated number boards across all six nose lights, plus rear taillight functions for prototypical push-pull operation DCC ready — drop-in compatible with Train Control Systems K4D6 or ESU LokSound 5 micro decoders for sound and DCC upgrades Magnetic knuckle couplers for reliable operation Crisp Chicago Metra livery (gray, blue, orange with black roof) with sharp printed graphics and applied detail parts Scale: N (1:160) More Information Brand Kato Item Number 176-6124 Scale N (1:160) Road Name Chicago Metra (METX) Road Number 424 Locomotive Type Diesel Prototype MotivePower Industries MP36PH-3S DCC DCC Ready (Standard DC analog) Era Modern Minimum Curve Radius 9-3/4" (249mm) Condition New FAQ Is this DCC equipped?No — this is the Standard DC analog version. It is, however, DCC ready and accepts a drop-in Train Control Systems K4D6 decoder or ESU LokSound 5 micro for sound + DCC operation without hard wiring. What's the minimum operating radius?9-3/4" (249mm) — works on Kato Unitrack curves R249 and larger, but wider curves are recommended for best appearance with this long-hood prototype. Does this come with bi-level cars?No, this is the locomotive only. Kato makes matching bi-level Metra commuter cars sold separately to build a complete consist. How does this differ from the 176-6123 release?The 176-6124 is Metra #424 in the updated 2020 livery; the 176-6123 is Metra #403 in the earlier paint scheme. Mechanically they're the same chassis.

Read more less

The Walthers Cornerstone HO Scale Plastic Pellet Plant kit models a modern facility that processes raw or recycled materials into pellets for use in manufacturing. From soda straws to automotive parts, pellets remain one of the most versatile materials used worldwide. This detailed kit captures the look of a real pellet plant, complete with silos, truck-loading doors, and rooftop details. Ideal for industrial layouts or modules, it makes an impressive addition to any modern or transitional railroad scene. Looking to save space? Pair this full-size facility with the Walthers 933-4146 Plastic Pellet Plant Background Building for a backdrop-friendly version of the same industry. HO scale plastic pellet processing plant kit Four tall storage silos with piping Large brick and metal processing building with truck-loading doors Loading rack with piping for two railroads Overhead walkways, rooftop air conditioners, and fine details Decal signs included Molded in six colors Shown assembled, painted, and weathered for realism Main building size: 15-3/8" x 10-1/2" x 4-1/2" (39 x 26.6 x 11.3 cm) Silos size: 27-9/16" x 2-3/8" x 8-1/4" (70.0 x 6.03 x 21 cm) More Information Brand Walthers Cornerstone Kit Type Plastic Building Kit Scale HO Scale (1:87) Model 933-4145 UPC 616374145823 MSRP $101.98 Ships Same or next business day HS Code 9503.00.00 Recommended Age 14 and up Made In China Instruction Sheet Download PDF Explore more HO Scale Structures at Squeaky’s Trains. FAQ Does this kit come assembled? No, it is a plastic building kit requiring assembly and painting. Is it ready-to-run? No, it is a kit designed for customization and weathering. What scale is it? HO Scale (1:87).

Read more less

Prototype Information: Weighing in at more than 400,000 pounds and with a length in excess of 80 feet and massive 5,000 horsepower tractive effort, the SD80MAC is one of the heaviest, longest, and most powerful single diesel locomotives in the world. Conrail was the first railroad to receive the SD80MAC in early 1996. As it would turn out, Conrail would be the only original buyer of this locomotive, even purchasing both of the demonstrator units. CSX and Norfolk Southern have since acquired these units, using them primarily in coal service. Model Features: Power five-pole KATO motor with dual brass flywheels Directional Headlight and preprinted numberboards Kato magnetic knuckle coupler DCC Friendly mechanism ready for drop-in decoder installation Drop in DCC compatible with the Digitrax DN147K2 More Information Item # 5518 Brand Kato  Scale N Engine Electronics DC Type EMD SD80MAC Road Name Norfolk Southern Road Number 7227 MSRP $155 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less