All

HO Scale Metal pole and arms LED lights for low current drain Ready to use with resistors attached Designed for easy mounting 2 lights in the package Voltage Requirements: 14 to 18 volts AC or DC

Read more less

Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, order now - limited quantity available Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector ESU Sound for DCC and DC layouts featuring: - 4 function outputs with brightness control by CV- Fully DCC compatible- 14, 28, 128 speed steps- Dual mode DC and DCC- 4 air horns changeable by CVs- 2 bells changeable by CVs- Full 8-notch prime mover sounds- Compressor- Dynamic brake Same powerful drive as WalthersProto(R) locos featuring - Five-pole skew-wound motor- 14:1 gear ratio- Helical-cut gears for quiet operation and easy multiple unit operation- All-wheel drive and electrical pickup- Heavy die-cast metal chassis- Constant and directional LED lights PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:Horns: CV163 = 0 - Nathan K5LH (default)CV163 = 1 - Nathan K5HLLCV163 = 2 - Nathan K5HCV163 = 3 - Nathan K5LLABells: CV164 = 0 - Graham White E-Bell (default)CV164 = 1 - GE Steel Bell

Read more less

Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature: One time run of these roadnumbers, order now - limited quantity available Factory-installed vertical hand rails Molded drill starter points for grab irons (sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Fully assembled 21mtc connector Same powerful drive as WalthersProto(R) locos featuring: - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die-cast metal chassis - Constant and directional LED lights

Read more less

From coach and freight yards to primary power for shortlines, the WalthersMainline SW7 is a perfect choice for your HO layout! Delivering 1200-horsepower from an updated 567A prime mover, the prototypes proved popular with both railroads and industrial lines, with nearly 500 produced in just two years from 1949 to 1951, with several still in service, each layout-ready model is packed with features including: One time run of these roadnumbers, order now - limited quantity available Used by dozens of railroads and industrial lines for switching, local and branch line service with several preserved today! - Phase One body as appropriate with arched front cab windows and louvered radiator cover for units built from 1949 to 1950 - Phase Two body as appropriate with straight front cab windows and wire grille radiator cover for units built from 1950 to 1951 - Dual tall conical exhaust stacks - Large front radiator grille - Single straight hood to cab transition - 6 louvered side doors with letterboard gap - Factory-installed grab irons on hood and cab - With or without footboards as appropriate - 4 styles of headlights to match prototype practice as appropriate: * Original large single * Retrofit horizontal dual * Retrofit dual vertical * Dual sealed beam Same powerful drive as WalthersProto(R) locos featuring: - Five-pole skew-wound motor - 14:1 gear ratio - Helical-cut gears for quiet operation and easy multiple unit operation - All-wheel drive and electrical pickup - Heavy die cast metal chassis - Constant and directional LED headlights Next18 DCC Plug Correct size RP-25 metal wheels Proto MAX(TM) metal knuckle couplers

Read more less

Handle fast freight on your HO railroad with the rugged WalthersProto SD45! Introduced in 1966 with a 20-cylinder 645 prime mover cranking out 3600 horsepower, SD45s quickly became the preferred power for expedited freights and piggyback trains, going on to new careers with regionals and shortlines into the 1980s and beyond. Ready for service, features of these WalthersProto replicas include: NEW - High, short hood versions of Norfolk & Western and Southern Railway units One time run of these road numbers, order now - limited quantity available! Prototypes in freight service from 1966 to early 2000s - several preserved today! With LokSound 5 Sound and DCC for DCC and Standard DC layouts Road-specific details Superb paint and lettering Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running LED constant and directional headlights as appropriate Easy multiple-unit operation Heavy die-cast metal underframe Correct size RP-25 metal wheels Road-specific details on this model include: NEW - High short hood Leslie S-5T-R air horn Firecracker radio antenna Long hood forward operation Hood-mounted walkway lights (nonworking) Long hood mounted bell and bracket Flexicoil-C trucks with high-mount brake cylinders See other road-numbers and engine electronics: WalthersProto 920-41158 (DCC & Sound #3132) Current: WalthersProto 920-41159 (DCC & Sound #3149)

Read more less

The Bachmann HO Scale Pacific Flyer Train Set is an excellent entry into the hobby of model railroading. Decorated for the legendary Union Pacific, the 0-6-0 steam locomotive with operating headlight hauls its freight like a real trooper. Following just behind is a boxcar, a gondola and a cupola caboose, all with E-Z Mate(R) magnetic knuckle couplers. The train rides on a 36" circle of E-Z Track, including 11 pieces of curved track and a curved plug-in terminal rerailer. Cars feature Also includes a UL-listed power pack and an illustrated instruction manual.

Read more less

Bring the power of today's railroading to your HO layout with the WalthersMainline General Electric Evolution series diesels. Introduced in 2005 to comply with tougher emission standards, and more known among railfans and modelers as GEVOs, these big engines have quickly become one of the most popular locos worldwide. Designated as the ES44 (Evolution Series, 4,400 horsepower), prototype variations in North American service include locos with DC or AC traction motors and buyers have also specified center idler axles, as well as high adhesion or steerable trucks. Features of the models include: Limited edition - one time run of these roadnumbers! Model today's railroading at WalthersMainline prices The most popular prototype diesel in North America Thousands in service from 2005 to the present Correct profile radiator grilles & roof-top walkway surface details Easily handles 18" radius curves (22" or larger recommended) Six powered axles per unit LED Lighting includes: High or low headlight per prototype Working front ditch lights Three truck styles to match prototypes: Standard high-adhesion Steerable C4 A1A center idler axle Fully assembled Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant and directional lights Add grab irons to your model with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Model features low headlight, C4 A1A trucks and 2-vent dynamic brake details. Related suggestions: WalthersMainline 910-9867 HO EMD SD70ACe - DC - Canadian National #8015

Read more less

Standard SX Power Pack More Information Item # 22-018-1 Scale N & HO Scale

Read more less

The Mast Arm Traffic Lights hang over part of the intersection and are used for intersections located on suburban or small-town roads. They are ready to place right out of the package. They're hand-painted and authentically weathered. The Traffic Lights are pre-wired and made for use with the Just Plug® Lighting System. Single-faced and includes two red and two green lights, enough for one 4-way intersection. 4 Mast Arm Traffic Lights (2 red / 2 green) each with 36 in (91.4 cm) wire 2 Linker Plugs RoHS Compliant

Read more less

Flexible inclines are designed to simplify adding changes in elevation along straight or curved tracks. The pre-cut foam sections are molded in 2, 3 or 4 percent grades, which takes the guesswork and complex math out of building different levels of track. 4% sections elevate trackage 4" in 8'. All sections measure 2-1/2" wide x 24" long.

Read more less

EMD’s E-8 (and successor, E-9) were the quintessential North American passenger locomotive of the 1950s through the 1970s. 450 E8A and 46 E8B units were produced, with an additional 100 E9A and 44 E9B locos following. The first E8s were delivered in 1949, with the last E9 being produced in 1964. These units pulled passenger trains from coast to coast, and later became the backbone of Amtrak’s fleet in its early days. Many more were later used in commuter service before being retired. Today several units live on in museums and tourist railroads throughout North America. What makes Rapido’s E8 and E9 models different than every E8 or E9 that has come before? Simple – we’re doing it right. Every E8 model out there is a “best guess” as to the nose, roof and windshield contours of the real thing. At Rapido’s we don’t believe in making guesses. That’s why we commissioned a 3D laser scan of Union Pacific E8 #942 at the Southern California Railway Museum. A 3D scan ensures that we get those impossible-to-guess contours bang-on accurate. Our engineers trace the scan and shrink it down to HO scale. Rapido’s E8 model features: 3D laser-scanned body shell Accurate nose and roof contours Seven different noses Three different back ends Two different sides – with and without lifting lug covers Three different steam generator options 36” fan, 48” fan or non-dynamic brake options Single- or dual-headlight configurations Freight or passenger pilots Three styles of side grills Original porthole sides or rebuilt with blanked sides (including unique variations) Skirted or non-skirted fuel tanks Original square and sloped or Hyatt roller bearing journal boxes Heavy die-cast chassis Smooth running drive system with all wheels powered Complete lighting effects – headlights, class lights, backup lights, ground lights, cab lights and more Numerous road-specific detail parts in both plastic and etched metal Below is a list of just SOME of the road-specific detail parts that we are producing: Four different sand filler hatch styles PRR Train Phone antenna Southern rooftop air tanks Southern large-capacity water tanks UP snow shields Cab-side walkways (2 styles) Pilot MU hoses ATS shoes PRR Nose lifting lugs Three different radio antenna Six different headlight/warning light inserts Various bug screens, mirrors, and wind deflectors Numerous grab iron configurations Several horn styles (in brass) And probably more that we’ve forgotten! Each E8A & E8B locomotive will have road specific details applied. Details are listed with each product. You can see a visual representation of the details by clicking the button below. More Information Item # 28564 Scale HO Locomotive Type Diesel Engine Style E8 Engine Electronics DC, DCC and Sound Road Name Southern

Read more less

Bowser HO Scale ready-to-run 70-Ton 2-Bay Covered Hoppers are based on Pullman-Standard prototypes built beginning in the mid 1950s and operated into the 2000s. They hauled cement, grain and other heavy, granular materials. These layout-ready freight cars feature injection-molded bodies with accurate decoration, molded details that stand up to layout operations, free-rolling trucks with metal wheels and magnetic knuckle couplers. The 70-Ton 2-Bay Covered Hopper model feature open or closed sides as appropriate for each scheme. They re great additions to your diesel-era freight trains.  HO Scale Features: • Ready to run • Road number 71300  • Roller Bearing Trucks with metal wheels • Interior & slope sheet braces and knuckle couplers. WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Read more less