Coupons

Add texture and highlights to scenery Blends naturally with other foliage For any scale 57.7 in3 (945 cm3)

Read more less

2 fl oz (59.1 mL)

Read more less

2 fl oz (59.1 mL)

Read more less

Use Green Grass Fine Turf to model realistic grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage. Use for any scale. Add texture and highlights to scenery Model Grass, weeds, and dirt Blends naturally with other foliage Colorfast For any scale 21.6 in3 (353 cm3)

Read more less

Use Yellow Grass Fine Turf to model realistic grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage. Use for any scale. Add texture and highlights to scenery Model Grass, weeds, and dirt Blends naturally with other foliage Colorfast For any scale 21.6 in3 (353 cm3)

Read more less

The Digitrax TSMK is the adapter between signals you already own and a Digitrax signal system. Two terminal strip boards, with the current-limiting resistors already on them, take bare wires from your existing signals on screw terminals at one end and accept a standard signal driver cable at the other - so you keep the signals you have built or bought and still drive them properly. Signalling your layout? Browse our DCC Accessories, DCC Wiring, and the full Digitrax range. What's Included Item Qty Terminal strip board with resistors 2 Features Connects existing signals to a DCC signal system without replacing the signal bases you have already installed. Resistors already fitted on the board - no current-limiting maths and no risk of over-driving an LED. Each board handles 1 to 4 signal heads, so a single board can serve a mast with several heads or a group of simple signals. Screw terminals at the signal side - run your existing wires in and tighten, no soldering. Plug a standard signal driver cable into the other side and the signals join the rest of the system. More Information Brand Digitrax Item Number TSMK Product Type Terminal Strip Mounting Kit Scale All scales Contents 2 terminal strip boards with resistors Capacity 1 to 4 signal heads per board Signal Connection Screw terminals System Connection Digitrax signal driver cable Condition New FAQ What problem does this solve?You already have signals on the layout - scratch-built, from another manufacturer, or installed before you went to DCC signalling - and you want to drive them from a signal decoder without pulling them out and starting again. Do I still need resistors for my LEDs?No. The current-setting resistors are on the board already, which is most of the value of the kit. How many signals will one kit handle?Two boards, each covering one to four signal heads, so up to eight heads per kit depending on how they are arranged. What else do I need?A signal decoder to drive the aspects and a signal driver cable to reach the boards - the SDCK kit provides the cable and sockets.

Read more less

The SoundTraxx 885624 is a BLU-PNP8 Blunami digital sound decoder with the EMD-2 sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is a drop-in replacement for the factory AT-style board in many HO diesels, suited to HO to S scale. Features 8 EMD-2 prime movers: EMD 567 12-cylinder (no transition), EMD 567C 16-cylinder non-turbo, EMD 645E 12-cylinder non-turbo, EMD 645E 12-cylinder turbo, EMD 645F 16-cylinder turbo, EMD 645E 20-cylinder turbo, EMD 710G 12-cylinder, EMD 710G 16-cylinder Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885624 Model: BLU-PNP8 Blunami Sound Set: EMD-2 Diesel Scale: HO to S scale Decoder Size: 74 x 17 x 5mm Connection: Drop-in AT-style board replacement Max. Motor Stall Current: 2A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD-2 sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD-2 or plain EMD — which do I want?This is the EMD-2 set: a second collection of less-common EMD prime movers, called out by cylinder count. The plain EMD set covers the more common 567/645/710 variants. Match the list above to your prototype. Will it fit my locomotive?This one measures 74 x 17 x 5mm and connects by drop-in at-style board replacement. Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.

Read more less

Bring a classic industry to your HO layout with the Cornerstone Brickworks Series. Typical of facilities producing brick and similar products from the 1880s to the 1990s, the series includes four authentic structure kits, sized to model a complete operation on most layouts as well as accessories. Perfect for modeling "green bricks" ready for the kilns or finished bricks headed for market, the Cornerstone Brick Stacks Kit features: Detail brick works, building supply centers and construction sites Use as interior or dock details - great loads for boxcars and trucks too! Includes four large and 10 small stacks of bricks plus 24 pallets Molded in two colors Kit - 1/2 x 1/2 x 11/32" 1.2 x 1.2 x 0.8cm

Read more less

Spotlight is designed and ready to plug into the Just Plug Light Hub. Kit includes: 2 Small Spotlights

Read more less

This Walthers Trainline HO Scale Offset Hopper is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Offset Hopper include molded details that stand up to handling during operation and realistic paint schemes for good looks. The Offset Hopper is part of the large line of Trainline cars and locomotives.  Colorful paint and lettering schemes Fully assembled Use with any HO Scale train set Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less