Holiday Gift Collection

All aboard The Polar Express! This officially licensed Polar Express Checkers Board Game brings the holiday magic of the North Pole right to your table. Perfect for fans and families alike, this winter-themed edition transforms the classic game of checkers into a festive railway adventure featuring beloved scenes and characters. Includes 24 checkers pieces and 8 locomotive king pieces Features a 13 x 21-3/8" (33 x 54.3 cm) winter-themed North Pole board Includes sticker sheet and complete instructions Great gift for fans of The Polar Express Durable game components designed for long-lasting fun More Information Brand Train Enthusiast Vendors Product Type Board Game Theme The Polar Express Model 419834 Condition New MSRP $19.99 Availability In Stock Made In China Frequently Asked Questions Q: Is this an officially licensed Polar Express product?A: Yes, it’s officially licensed and features authentic artwork and branding. Q: How big is the game board?A: The board measures approximately 13" x 21-3/8" (33 x 54.3 cm). Q: What ages is it suitable for?A: Recommended for ages 6 and up. Q: Does it include instructions?A: Yes, complete instructions are included inside the box. Q: Is it a good gift item?A: Absolutely! It’s a festive favorite for families and fans of The Polar Express.

Read more less

The LokSound by ESU LED Interior Lighting Strips are perfect for lighting HO and N Scale passenger car interiors operating on DCC layouts. They're designed for use only on track power (electrical wipers and accessories available separately). Offered with warm white (397-50708) or yellow (397-50709) LEDs they allow you to match your lighting color to your modeling era. The strips include a small potentiometer so you can adjust the brightness. For shorter cars or cabooses the strips can be cut. The red marker LEDs are on wire leads for easy placement where needed. The integral ESU decoder supports both Motorola(R) and DCC, and also works on DC analogue layouts. The operating mode is detected automatically. In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows you to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car. All effects can also be programmed once the lighting strip has been installed and the values of your DCC LED Interior Lighting Strips can be read on a programming track. Yellow 10 x 11/32" or 25.5 x .9cm More Information Item # 50709 Brand ESU Scale O, HO, TT, N Pack Size 1 MSRP $29.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Looking for the current generation? See the ESU 50718 digital passenger car lighting kit with 13 warm white LEDs, entry lighting, and expanded function control.The LokSound by ESU LED Interior Lighting Strips are perfect for lighting HO and N Scale passenger car interiors operating on DCC layouts. They're designed for use only on track power (electrical wipers and accessories available separately). Offered with warm white (397-50708) or yellow (397-50709) LEDs they allow you to match your lighting color to your modeling era. The strips include a small potentiometer so you can adjust the brightness. For shorter cars or cabooses the strips can be cut. The red marker LEDs are on wire leads for easy placement where needed. The integral ESU decoder supports both Motorola(R) and DCC, and also works on DC analogue layouts. The operating mode is detected automatically. In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows you to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car. All effects can also be programmed once the lighting strip has been installed and the values of your DCC LED Interior Lighting Strips can be read on a programming track. Warm White 10 x 11/32" or 25.5 x .9cm More Information Item # 50708 Brand ESU Scale O, HO, TT, N Pack Size 1 MSRP $29.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) In the early 1900s, 2-6-2 locomotives were developed for use on the prairies of the American Midwest, earning them the nickname "Prairies." These locomotives often outlasted their more modern and efficient counterparts in branchline operations, thanks to their relatively light weight, ability to operate effectively in reverse, and capable speed range. Features Include Precision motor Completely hidden drivetrain Electrically isolated motor to allow hardwiring of DCC decoder Operating puffing smoke unit (non-toxic smoke fluid included) Operating headlight Separately applied metal handrails Highly detailed painted bodies with precision graphics Die-cast chassis See-through drive wheels with spokes Metal siderods Blackened metal wheels with RP25 contours on locomotive Wire-free drawbar connection between locomotive and tender Magnetically operated E-Z Mate® Mark II coupler on the rear of the tender Performs best on 18" radius curves or greater Product Measurements: L 10 in., W 1.5 in., H 2 in. Retail Package Measurements: L 13 in., W 1.8 in., H 3.5 in More Information Item # 51504 Brand Bachmann Trains Scale HO Type Baldwin 2-6-2 Prairie with Smoke Engine Electronics DC & Smoke Road Name Southern Railway MSRP $199.00

Read more less

Brand: JT's Mega Steam Scent: Cotton Candy Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

Brand: JT's Mega Steam Scent: Grape Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

Run iconic Union Pacific power with full sound on your N scale layout. Kato's EMD SD70M in the commemorative #1979 "We Are One" scheme comes factory-equipped with an ESU LokSound 5 DCC sound decoder, delivering UP's 4,000-horsepower presence with realistic EMD prime-mover audio, horn, bell, and dynamic brake effects right out of the box. Specifications Brand Kato Item Number 176-1979-S Scale N (1:160) Road Name Union Pacific Road Number #1979 "We Are One" Prototype EMD SD70M, flat radiator Power 4,000 horsepower Decoder ESU LokSound 5, DCC with sound (factory installed) Motor Five-pole with dual brass flywheels Couplers Kato knuckle couplers Lighting Directional LED headlights Condition New Features Factory-installed ESU LokSound 5 DCC sound decoder Realistic EMD diesel prime-mover sound, horn, bell, and dynamic brake Runs on both DC and DCC layouts (full features and sound control on DCC) Union Pacific #1979 "We Are One" commemorative paint Smooth five-pole motor with dual brass flywheels Directional LED headlights and Kato knuckle couplers Scale: N (1:160) Frequently Asked Questions Is sound included?Yes. It ships with a factory-installed ESU LokSound 5 DCC sound decoder, ready to run. Will it run on a DC layout?Yes. The LokSound decoder operates on DC with basic sound; full sound and function control are available on a DCC system. What scale is this?N scale (1:160). Does it have working lights?Yes, directional LED headlights are built in. Explore More Browse more N Scale Trains & Track and N Scale Locomotives.

Read more less

The Digitrax TL1 is a single-function DCC decoder with integrated transponding — perfect for adding a controllable function output (lights, smoke, or other accessory) to a non-decoder locomotive while also giving you Digitrax's position-tracking feature on the same board. At just 1.0" × 0.4" × 0.16", it fits in cabooses, passenger cars, lightboards, and even N-scale shells where space is tight. Looking for more DCC decoders and electronics? Browse our DCC Decoders and Electronics & Wiring collections. Features One DCC-controllable function output with full transponding (Digitrax position-tracking) built in — no separate transponder board needed. 1A continuous, 2A peak function output — plenty for headlights, marker lights, rear lights, smoke units, or other accessories. Hardwire install with color-coded leads (blue common, white function, red & black track) — works in HO, N, O, S, and G with appropriate wire gauge. Full CV programming including FX3 lighting effects (Mars, Gyralite, Strobe, Random Flicker, Soft On/Off, etc.). SuperSonic silent-running operation — no audible motor whine. Compatible with all DCC systems following NMRA standards. More Information Brand Digitrax Item Number TL1 Type Single function-output DCC decoder with transponding Function Outputs 1 (white) — 1A continuous / 2A peak Motor Output None — function-only decoder Transponding Integrated (no add-on board needed) Connection Hardwire — color-coded leads Size 1.0 × 0.4 × 0.16 in Scale Compatibility HO, N, O, S, G (any DCC scale) Condition New — sealed UPC 652667100052 FAQ What is "transponding"?Transponding is Digitrax's position-tracking technology — the TL1 reports its location back to your command station through compatible Digitrax detection sections, so you can see exactly where a transponding-equipped car or locomotive is on your layout. It's not the same as RailCom but serves a similar role. Does this drive a motor?No — the TL1 is a function-only decoder. It controls ONE output (typically a light or accessory). For motor control you need a full mobile decoder like the Digitrax DH126MT, DZ126, or any other mobile decoder. What can I wire to the function output?LEDs (with appropriate resistor), incandescent bulbs, smoke units, sound modules, ditch lights, mars lights, or any DC-powered accessory drawing under 1A continuous. FX3 effects let you simulate prototypical lighting patterns. Will it work with any DCC system?Yes — the TL1 follows NMRA DCC standards and runs on any DCC command station. Transponding readback, however, requires a Digitrax LocoNet system with appropriate detection sections (BDL168, BDL16, etc.).

Read more less

The Digitrax TF4 is a quad-function DCC decoder with integrated transponding — four independently controlled function outputs on one tiny board, plus Digitrax's position-tracking feature built right in. Perfect for adding ditch lights, mars lights, rear markers, classification lamps, smoke generators, or any other DCC-controlled accessory cluster to a non-decoder locomotive. Looking for more DCC decoders and electronics? Browse our DCC Decoders and Electronics & Wiring collections. Features Four independent DCC-controllable function outputs (white, yellow, green, purple) — control each one separately via your throttle. Integrated transponding — Digitrax position-tracking built in, no separate transponder board needed. 1A continuous, 2A peak combined function output — plenty for headlights, ditch lights, rear lights, smoke, or accessory clusters. Hardwire install with color-coded leads — works in HO, N, O, S, and G scale. Full CV programming including FX3 lighting effects (Mars, Gyralite, Strobe, Random Flicker, Soft On/Off, Rule 17, etc.) on every output. SuperSonic silent-running operation, NMRA DCC compatible. More Information Brand Digitrax Item Number TF4 Type Quad function-output DCC decoder with transponding Function Outputs 4 (white, yellow, green, purple) — 1A continuous combined Motor Output None — function-only decoder Transponding Integrated (no add-on board needed) Connection Hardwire — color-coded leads Scale Compatibility HO, N, O, S, G (any DCC scale) Condition New — sealed UPC 652667100083 FAQ What's the difference between the TF4 and the TL1?The TL1 has one function output; the TF4 has four. If you need to control multiple separate lighting circuits (headlight + ditch lights + class lamps + rear marker) the TF4 is the right call. Both have integrated transponding. Does this drive a motor?No — the TF4 is function-only. For motor + lights in one board, use a full mobile decoder like the Digitrax DH126 or DZ126. What can I wire to the function outputs?LEDs (with resistors), incandescent bulbs, smoke units, ditch lights, mars lights, signal lamps, sound modules — anything DC-driven under 1A combined draw. FX3 effects make each output simulate prototypical lighting patterns independently. Will it work with any DCC system?Yes — standard NMRA DCC. Transponding readback requires a Digitrax LocoNet command station with detection sections (BDL168, BDL16, etc.).

Read more less

This Atlas Master N scale Pullman-Standard PS-2750 3-bay hopper rolls in CSX Transportation black with yellow ex-Family Lines System lettering and road number 996968. The PS-2750 was the workhorse 70-ton coal hopper of the late 20th century — Pullman-Standard built thousands of them between 1954 and the early 1970s, and they still turn up in CSX consists today. Crisp lettering, fine end ladders, and free-rolling trucks make this a layout-ready addition to any modern coal drag or unit train. Looking for more N scale rolling stock? Browse our N Scale Trains & Track and N Scale Track & Accessories. Features Crisp CSX Transportation paint and lettering with ex-Family Lines System road number #996968 Sixteen side posts and accurate Pullman-Standard 2,750 cubic foot prototype detailing Fine end ladders and separately applied end details Die-cast hopper and center sill construction adds weight for reliable tracking AccuMate® operating knuckle couplers, free-rolling trucks Scale: N (1:160) More Information Brand Atlas Model Railroad Co. Item Number 50006998 Scale N Scale (1:160) Car Type Pullman-Standard PS-2750 3-Bay Open Hopper Road Name CSX Transportation (Ex-Family Lines System) Road Number 996968 Era Modern (1980s-Present) Coupler AccuMate® knuckle Condition New FAQ What scale is this hopper?N scale (1:160). It will run on any standard N gauge track. Is it ready to run out of the box?Yes. This is an Atlas Master release — fully assembled, painted, and ready to put on the rails. Are the AccuMate couplers compatible with Micro-Trains?The AccuMate operating knuckle couplers will couple reliably with Micro-Trains and other standard knuckle couplers in N scale. What era does this car fit?Modern era — CSX Transportation paint dates the car from the 1980s through present day.

Read more less

Run modern Union Pacific freight power on your N scale layout, ready for DCC right out of the box. This Kato EMD SD70ACe wears UP's distinctive "Flag Scheme" with the Building America logo as #8497 — one of the road numbers UP picked to commemorate the 2005 Chicago & North Western merger anniversary. The SD70ACe is the latest evolution of EMD's "70" series — a 4,300-horsepower AC-traction freight workhorse that's been on the front of UP intermodals, coal trains, and merchandise consists since 2004. This is the factory DCC-equipped version (-DCC suffix). The Kato decoder is pre-installed and tuned for smooth running — drop it on DCC track and it's ready to go. Kato's hallmark engineering is all here: a five-pole motor with dual flywheels, all-wheel drive and pickup, directional LED headlights and number-board lighting, blackened low-profile wheels for Code 55 or larger rail, and Kato's body-mounted magnetic-knuckle couplers. Looking for more N scale locomotives? Browse our N Scale Trains & Track and Locomotives. Features Highly detailed body shell with prototype-accurate UP "Flag Scheme" / Building America logo as #8497 Factory-installed Kato DCC decoder — runs on DCC track straight from the box Five-pole motor with dual brass flywheels — smooth, quiet, low-speed-friendly running All-wheel drive and all-wheel electrical pickup Directional LED headlights and number-board lighting (DCC-controlled) Blackened, low-profile wheels for Code 55, Code 70, or Code 80 rail Kato magnetic-knuckle couplers, body-mounted Scale: N (1:160), Wheel arrangement: Co-Co (6-axle) More Information Brand Kato Item Number 176-8438-DCC Scale N (1:160) Prototype EMD SD70ACe Road Name Union Pacific Road Number #8497 Livery Flag Scheme / Building America Logo Era Modern (2004 to present) Engine Electronics DCC-equipped (factory-installed) Couplers Kato magnetic-knuckle, body-mounted Country of Origin Japan Condition New UPC 4949727683775 FAQ Is the DCC decoder pre-installed?Yes. The "-DCC" suffix indicates Kato's factory-installed DCC decoder. Drop it on DCC track and it runs. Does it have sound?No, this is the DCC-only version (no sound). For sound, you'd need the -LS variant or aftermarket sound install. Will it run on Code 55 track?Yes. The wheels are low-profile and blackened, so they roll cleanly on Code 55, Code 70, and Code 80 rail. What's the difference between SD70ACe and SD70M?The SD70ACe (this model) uses AC traction motors with a single inverter per truck — smoother low-speed lugging on heavy trains. The earlier SD70M used DC traction. Most Class I roads have moved to AC for new heavy freight units.

Read more less

The Lionel 6-12025 is a 4-1/2" straight track section from Lionel's FasTrack system — the easy-to-assemble three-rail O gauge track that's been the backbone of Lionel layouts since 2003. This shorter straight is a perfect filler piece for tight spots, custom layouts, sidings, and yard ladder arrangements where a full 10" straight is too long. What's Included One Lionel FasTrack 4-1/2" straight track section Built-in roadbed with simulated ballast and tie detail Solid nickel-silver running rails and center rail Pre-installed track-pin connectors on each end Specifications Brand Lionel Item Number 6-12025 Track System FasTrack Gauge / Scale O Gauge / O Scale Type Straight Section Length 4-1/2" Construction Three-rail with built-in roadbed Compatibility Lionel FasTrack system (all FasTrack pieces snap together) About FasTrack FasTrack is Lionel's modern O-gauge track system, designed to look great straight out of the box with realistic gray ballast and dark-tie detail molded into the roadbed. The track snaps together with built-in connectors — no separate track pins to fumble with, no roadbed to add later. FasTrack is fully compatible with all Lionel O gauge locomotives and rolling stock that run on traditional tubular O track, including conventional transformer control and TMCC/Legacy command systems. FAQ Will it work with Lionel O27 trains?Yes — FasTrack is O gauge, and most O27 trains will run on it. FasTrack curves are O36 minimum, so very small O27-only locomotives may not navigate the tightest curves, but straight pieces like this 4-1/2" work fine with anything O gauge or O27. Can I mix this with traditional tubular O track?Lionel makes adapter pieces to connect FasTrack to tubular O. The adapters are sold separately. Why use a 4-1/2" straight instead of a 10" straight?Short straights are essential for fitting yards, sidings, and tight spots into your layout. A 4-1/2" piece lets you adjust spacing in increments smaller than the standard 10". More From Squeaky's All O Gauge / O Scale Track Lionel

Read more less