On Sale

The Walthers Cornerstone Concrete-Style Silo is a great addition to any rural farm or ranch scene, and is typical of newer styles used to store feedstock for animals. They're usually placed adjacent to a barn with easy access for machinery used during filling. This easy-to-build plastic structure kit includes parts for a typical concrete silo with a curved dome and auger cover on the side. The Concrete Silo is one of many Cornerstone, Trainline and SceneMaster HO Scale structures and outbuildings. Aluminum dome and auger cover Simulated metal banding and turnbuckles Easy-to-build plastic kit molded in color Kit - 1-5/8" x 5-1/2" or 42 x 142cm

Read more less

The Walthers Cornerstone HO Scale Roof Details set includes parts to add realism and interest to the most visible part of your structures. This set of building details includes parts to build the details in the list below. All parts are molded in gray. Use these Roof Details to add interest and detail to your Cornerstone HO Scale industrial buildings. 1 Large rooftop air conditioner 1 Medium rooftop air conditioner 1 Small rooftop air conditioner 2 Small swamp coolers 1 Motorized blower 4 Cyclone vents 4 Short monitor vents with round base 3 Tall monitor vents with flanged stack 2 Capped exhaust stacks 3 Motorized vents 3 Wind direction vent-intakes 3 Angled exhaust-Intake ducts 4 Short T-style exhaust stacks 5 tall smokejacks with caps

Read more less

Multi Scale  5 x 3.6" Tall: 26 feet in HO, 48 feet on N 7 x 4.3" Tall: 31 feet in HO, 57 feet on N 12 Pieces Total A Great Value

Read more less

Multi Scale  2" Tall: 14.5 feet in HO, 26.5 feet on N 12 Pieces Total A Great Value

Read more less

15 pack of Peel. Stick. 'n Light.  Easy to install & ready to use! 12 to 16 volts Use an AC or DC power supply or batteries Lights are connected to 11 inch wire Each light contains two-sided tape to allow attachment to a flat surface Great for Dollhouses, Train layouts, Buildings, Models & more!

Read more less

HO Scale Metal pole and arms LED lights for low current drain Ready to use with resistors attached Designed for easy mounting Great for use as parking lot lights  2 lights in the package

Read more less

Replacement Pads for Rail Tracker™. Use with Clean Track Solution™ to remove dirt and make track ready for operation. Includes eight Cleaning Pads (dark-colored) and eight Finishing Pads (light-colored). Works for N, HO, HOn3 and three-rail O scale track.

Read more less

Use Clean Track Solution with Cleaning & Finishing Pads. It is specially formulated to remediate oil and remove dirt and grime for improved conductivity. Clean Track Solution is non-toxic, water-soluble and safe for scenery. 1.85 fl oz (54.7 mL)

Read more less

A PBM can be added to a HO model train locomotive so that if the model train wheels loose connection from the track because of dirty track or other problems, the Power Backup Module will supply power to the Locomotive Module for up to many seconds to keep operating properly without sounds, lights, or even motor stopping! What is special about the RaiPro PBM is that the PBM is an active power backup not a passive one like many other power backups. Many others are basically just super capacitors that the voltage drops exponentially as soon as the power is removed. With other backups, lights continually dim and module performance is effected. Our PBM has onboard microcontroller and other electronics that will output a fixed voltage similar to a good power supply output so lights stay constant while PBM is active and locomotives perform better. Product Specifications: Connection 2-wire Dimensions: 1.27 x 0.66 x 0.32 in DCC Track Voltage: 12.6V – 16V     Approximate Run time lights only: ~18 SecondsApproximate Run time lights and sounds: ~14 SecondsApproximate Run time lights, sounds, and pulling a train:Varies greatly depending on locomotive, speed, load etc. PBM Frequently Asked Questions What is the most important aspect of a power backup module? In our opinion, the most important aspect of a PBM is its ability to power a locomotive pulling a train across dead track. Our PBM works so well that one of our locomotives pulled twelve cars across thirty inches of dead track without stopping while the lights and sounds were on! We tested some other super capacitor only power backup products that only covered a small fraction of the distance and were as large as our PBM! If the most important aspect is powering the locomotive pulling a train, why is there so many others that show or talk about the time the lights stay on? Powering a train can take many times the power then to just have light and/or sounds on because the motor can use much more power than powering the lights and/or sounds. We have seen super capacitor only designs that have real long light on time but when you try to pull a train the results were very poor. One product we tested had many seconds of light and/or sound on time but when pulling a train it died in less than 0.2 seconds! This is why we think many talk about or show light on time because it makes their products look better than they may perform when actually pulling a train. Do I have to use a PBM in all my locomotives for them to run well? NO. If your layout is powered by a RailPro power supply, you have quality locomotives, your layout is properly wired, and you do a reasonable job of keeping your track and locomotive wheels clean, you can have a good running layout without PBMs. So who does Ring Engineering sell PBMs for if some RailPro customers do not really need them? There are many RailPro customers that run on other peoples layouts (like at train clubs) and they cannot control how clean or maintained the track is. There are some RailPro customers that do clean their track regularly but just want extra insurance to be sure they get the best operation possible. Is it ok to use other companies power backup like devices with RailPro locomotive modules? No. Ring Engineering products should only be used as described in their user manuals. The LM user manuals do not say it is ok to connect super capacitors. Using our products in a way not in compliance with our user manuals will void the warranty of the Ring Engineering product and may cause serious problems. There is no public specification on how to design power backup units so there is no guarantee of compatibility. We believe that some regular super capacitor designs have been used with RailPro LM modules and damaged the RailPro modules. If you want power backup you should only use a Ring Engineering PBM with your RailPro locomotive modules. If a power backup has more Farads of super capacitors is it better? Not necessarily. The amount of capacitance (Farads) is only one factor and may not be a real good one when trying to compare one power backup to another. There are other important features to consider besides capacitance. For example a one Farad device can be a lot better than a two farad device. The two farad device may allow lights to run longer but not be able to power a moving train well. There is simply a lot more to it then simply comparing how much capacitance a backup device has built into it. Made In USA

Read more less

Use the Easy Rock Carving Tools with Carving Plaster to carve custom rock formations. The Strata Tool helps you carve and shape large areas fast to model strata, blasted rock and other weathered and eroded outcrops. The Carving Tool has two sides - a Chisel and a Pick. Use the Chisel to carve gouges and cavities. Use the Pick to carve grooves, fine-line abrasions and striation markings. Keep your carving area free from debris with the Duster. 3 piece set Specially formulated to work with Terrain and Landscape products, these tools and adhesives are designed to simplify your modeling efforts. They are fully tested for results, safety, quality and durability.

Read more less

Universal speaker housing for the TCS 13.6mm x 9.6mm speaker (included). This simple, closed design channels both the front and rear audio out the front of the speaker housing. These micro speakers do not work without being mounted to an enclosure (like this one) or to a piece of the locomotive shell. Specs Dimensions: 0.61" x 0.39" x 0.26" or 15.6mm x 10mm x 6.6mm Power Rating: 0.8W DC Impedance: 8 Ohms Includes 1x UNIV-SH6-C Speaker Surround1x 13.6mm x 9.6mm WOWSpeaker

Read more less

This 13.6mm x 9.6mm speaker could be classified as a “sugar cube” speaker. This style of speaker is often feature in cell phones and tablets and performs slightly differently from standard speakers. This style of speaker REQUIRES mounting with a baffle to produce much sound at all, but once they are mounted they produce significantly more sound than you might expect. Try them out in your space restricted installations. Dimensions: 0.54″ x 0.38″ x 0.11″ or 13.6mm x 9.6mm x 2.9mm Sound Pressure Level: 82 dB ± 3.0 dB at 0.5W , 10cm 1.5 KHz. Effective Frequency Band: 700 Hz. to 10,000 Hz. Power Rating: 0.8W DC Impedance: 8 Ω ± 15 % at 1.0V 2,000 Hz.

Read more less