On Sale
Rock Island Hobby Rock Island Hobby 013101 | Street Lights (3) - Vertical Pole with Single Arm | N Scale
N Scale Metal Pole and arm Led Light with low current drain Ready to use with resistor attached Designed for easy mounting
$11.19$8.95
Rock Island Hobby Rock Island Hobby 012101 | Street Lights (3) - Vertical Pole with Single Arm | HO Scale
HO Scale Metal Pole and arm Led Light with low current drain Ready to use with resistor attached Designed for easy mounting
$11.19$9.51
MTO Battery MTO TRAIN-44 | LI-ION Battery 14.8V/2Ah | Large Scale
MTO TRAIN-44 LI-ION Battery 14.8V / 2Ah Great for "dead rail" model railroad installations in locomotive (G-scale or LGB) or trailing power cars. Approximate Dimensions: 2.00" x 1.375 x 1.8125" Weight: .337lb Connector: 20AWG JST SM Max Continuous Discharge: 2A Overdischarge protection: Yes Overcharge protection: Yes Recommended Charge Current: 1A Short Circuit Protection: Yes Please fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage.
$59.99$53.99
Woodland Scenics Woodland Scenics 4562 | Roto Pads™
Easy-to-apply replacement pads for N and HO scale Roto Wheel Cleaners™. Will not scratch wheels. 6 sets of Cleaning Pads - 76 3/4" (194 cm) & 2 sets of Scrubbing Pads - 25 1/2" (64.7 cm) for the N scale Cleaner. 3 sets of Cleaning Pads - 76 3/4" (194 cm) & 1 set of Scrubbing Pads - 25 1/2" (64.7 cm) for the HO scale Cleaner.
$5.95$5.29
WalthersMainline Walthers Mainline 910-11004 | EMD SD75M - Standard DC - BNSF Railway #8275 (orange, black, green, silver, Heritage II) | HO Scale (Copy)
$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024 Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window More Information Item # 11004 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name BNSF Railway Road Number 8275 MSRP $169.98
$144.48
WalthersMainline Walthers Mainline 910-11003 | EMD SD75M - Standard DC - BNSF Railway #8268 (orange, black, green, silver, Heritage II) | HO Scale
$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024 Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window More Information Item # 11003 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name BNSF Railway Road Number 8268 MSRP $169.98
$144.48
WalthersMainline Walthers Mainline 910-21004 | EMD SD75M - ESU® Sound & DCC - BNSF Railway #8255 (orange, black, green, silver, Heritage II) | HO Scale
$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024 Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window More Information Item # 21004 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name BNSF Railway Road Number 8255 MSRP $229.98
$195.48
WalthersMainline Walthers Mainline 910-21003 | EMD SD75M - ESU® Sound & DCC - BNSF Railway #8252 (orange, black, green, silver, Heritage II) | HO Scale
$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024 Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window More Information Item # 21003 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name BNSF Railway Road Number 8252 MSRP $229.98
$195.48
WalthersMainline Walthers Mainline 910-11002 | EMD SD75M - Standard DC - Santa Fe #222 (red, silver, Superfleet) | HO Scale
$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024 Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window More Information Item # 11002 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name Santa Fe Road Number 222 MSRP $169.98
$144.48
WalthersMainline Walthers Mainline 910-11001 | EMD SD75M - Standard DC - Santa Fe #203 (red, silver, Superfleet) | HO Scale
$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024 Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window More Information Item # 11001 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name Santa Fe Road Number 203 MSRP $169.98
$144.48
WalthersMainline Walthers Mainline 910-21001 | EMD SD75M - ESU® Sound & DCC - Santa Fe #202 (red, silver, Superfleet) | HO Scale
$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024 Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window More Information Item # 21001 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name Santa Fe Road Number 202 MSRP $229.98
$195.48
WalthersMainline Walthers Mainline 910-21002 | EMD SD75M - ESU® Sound & DCC - Santa Fe #209 (red, silver, Superfleet) | HO Scale
$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024 Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window More Information Item # 21002 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name Santa Fe Road Number 209 MSRP $229.98
$195.48