SoundTraxx brings new dimensions in digital sound technology to your model railroad. Regardless of your scale or prototype, they have a sound system for you! They manufacture all of their Digital Sound Decoders in the USA, right here in Durango, Colorado. Their professional sound engineers record and edit their sound files and test their decoders multiple times before they ship to ensure top quality.
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze. We offer 11 colors to match the NMRA and SoundTraxx standards. SoundTraxx 810142 - Black (Current Selection) SoundTraxx 810143 - Orange SoundTraxx 810144 - Purple SoundTraxx 810145 - Gray SoundTraxx 810146 - White SoundTraxx 810147 - Green/Yellow Stripe SoundTraxx 810148 - Blue SoundTraxx 810149 - Red SoundTraxx 810150 - Brown SoundTraxx 810151 - Yellow SoundTraxx 810152 - Green More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.
$7.16
The SoundTraxx 884013 is a TSU-21PNEM8 Tsunami2 digital sound decoder with the Steam sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the 21-pin MTC plug-in decoder, rated 1A and suited to HO scale and larger. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 63 selectable whistles, 10 exhaust chuffs, 12 bells, 10 airpumps and 8 dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 884013 Model: TSU-21PNEM8 Tsunami2 Sound Set: Steam Steam Scale: HO scale and larger Decoder Size: 30.5 x 15.5 x 6.5mm Connection: 21-pin NEM (21MTC) plug Max. Motor Stall Current: 1A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Steam sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 30.5 x 15.5 x 6.5mm and connects by 21-pin nem (21mtc) plug. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.
$98.36
The SoundTraxx 885841 is a TSU-BH1 Tsunami2 digital sound decoder with the GE sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a drop-in board replacement for Bachmann Sound Value diesels, rated 2A and suited to HO scale Bachmann Sound Value diesels. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 8 GE prime movers: GE FDL-12, GE FDL-16, GE 7FDL-16, GE Dual FDL-16, GE GEVO G12, GE 44-Ton Center Cab Dual Caterpillar, GE Cummins Switcher, GEVO G12 Tier 4 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885841 Model: TSU-BH1 Tsunami2 Sound Set: GE Diesel Scale: HO scale Bachmann Sound Value diesels Decoder Size: 97 x 16 x 7.7mm Connection: Drop-in replacement for the Bachmann Sound Value factory board Max. Motor Stall Current: 2A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other GE sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 97 x 16 x 7.7mm and connects by a drop-in replacement for the bachmann sound value factory board. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Which locomotives is the BH1 for?It is a drop-in replacement for the factory board in Bachmann Sound Value diesels, including the FA-2, FB-2, S-4, E7-A, F-7, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, RS-3 and SD40-2. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.
$98.36
The SoundTraxx 884010 is a TSU-N18 Tsunami2 digital sound decoder with the Steam-2 sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the Next18 decoder for N and small HO models, rated 1A and suited to N and small HO models with a Next18 socket. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 90 selectable whistles — 27 more than the standard Steam set — plus 10 exhaust chuffs, 12 bells, 10 airpumps and 8 dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 884010 Model: TSU-N18 Tsunami2 Sound Set: Steam-2 Steam Scale: N and small HO models with a Next18 socket Decoder Size: 25 x 9.5 x 4.1mm Connection: Next18 (N18) socket Max. Motor Stall Current: 1A Function Outputs: 6 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Steam-2 sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 25 x 9.5 x 4.1mm and connects by next18 (n18) socket. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. How is Steam-2 different from the standard Steam set?The chuffs, bells, airpumps and dynamos are the same. The difference is the whistle library: Steam-2 offers 90 whistles against 63 on the standard Steam set, with many roadname-specific additions. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.
$100.76
The SoundTraxx 886001 is a TSU-1100 Tsunami2 digital sound decoder with the Electric sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a compact universal-style decoder for tight installs, rated 1A and suited to small models with minimal space. Dynamic Digital Exhaust reads the load on the motor and notches the traction motor up and down on its own, so the locomotive sounds like it is working for its train. Features AC traction motor sound with pantograph up/down (interlocked so the loco will not move with the pantograph down), trolley bell, stop-request bell, pneumatic doors and cab chatter Dynamic Digital Exhaust (DDE) matches traction motor sound to the load on the motor automatically Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 886001 Model: TSU-1100 Tsunami2 Sound Set: Electric Electric Scale: small models with minimal space Decoder Size: 27 x 10.5 x 5mm Connection: Universal-style hardwire Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Electric sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 27 x 10.5 x 5mm and connects by universal-style hardwire. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.
$111.96
The SoundTraxx 884011 is a TSU-1100 Tsunami2 digital sound decoder with the Steam sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a compact universal-style decoder for tight installs, rated 1A and suited to small models with minimal space. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 63 selectable whistles, 10 exhaust chuffs, 12 bells, 10 airpumps and 8 dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 884011 Model: TSU-1100 Tsunami2 Sound Set: Steam Steam Scale: small models with minimal space Decoder Size: 27 x 10.5 x 5mm Connection: Universal-style hardwire Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Steam sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 27 x 10.5 x 5mm and connects by universal-style hardwire. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.
$111.96
The SoundTraxx 810037 is the Shrink Tube Assortment. This assortment includes 6" each of 1/16", 3/32", 1/8" and 1/4" diameter tubing for insulating solder connections. More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.
$10.66
The SoundTraxx 851001 is the MC1Z102P6 DCC mobile decoder — a motor and lighting decoder without sound, for Z and N scale locomotives. It is rated 1 amp and connects by 6-pin nem651 plug. As an MC1 series decoder it operates on DCC only — it needs a command station and will not run on a plain DC power pack. Motor control is SoundTraxx Hyperdrive. Features DCC operation — requires a DCC command station 14 Hyperlight lighting effects across 2 function outputs — Mars Light, Pyle National Gyralite, single and dual strobes, Western-Cullen D312 rotary beacon, Prime Stratolite, Type I and II ditch lights with grade-crossing logic, dimmable headlight, Dyno-Light and FRED Rule 17 or directional lighting control, grade-crossing timers, adjustable flash rate and LED brightness correction Hyperdrive motor control for smooth low-speed running NMRA DCC compliant, made in Durango, Colorado More Information Item Number: SoundTraxx 851001 Model: MC1Z102P6 Type: Mobile decoder — motor and lighting, no sound Scale: Z and N scale Decoder Size: 13 x 9 x 3mm Connection: 6-pin NEM651 plug Max. Motor Stall Current: 1A Function Outputs: 2 (100mA each) Operating Modes: DCC only Max. Track Voltage: 22V Motor Control: Hyperdrive Shop the full SoundTraxx range, compare every DCC decoder we stock, or find install parts in DCC wiring. Want engine sound as well? Look at the sound decoders instead — this one is motor and lights only. FAQ Does this make engine sound?No. Mobile decoders drive the motor and lights only. For sound, choose a Tsunami2, Blunami or Econami sound decoder. Will it run on my DC power pack?No. This is an MC1 series decoder and is DCC only — it needs a command station. If you need DC too, choose an MC2 series decoder such as the 852002 or 852003. What does the model number mean?MC1Z102P6 breaks down as: MC1 series (DCC only), Z for Z and N scale, 1 amp, 02 function outputs, and the connector type. Will it fit my locomotive?It measures 13 x 9 x 3mm and connects by 6-pin nem651 plug. Check that against your locomotive before ordering — the other MC decoders use different connectors and sizes.
$25.96
The SoundTraxx 885621 is a BLU-1100 Blunami digital sound decoder with the EMD-2 sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is the most compact decoder in the Blunami line — small enough for N scale, suited to N, HO and small S scale. Features 8 EMD-2 prime movers: EMD 567 12-cylinder (no transition), EMD 567C 16-cylinder non-turbo, EMD 645E 12-cylinder non-turbo, EMD 645E 12-cylinder turbo, EMD 645F 16-cylinder turbo, EMD 645E 20-cylinder turbo, EMD 710G 12-cylinder, EMD 710G 16-cylinder Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885621 Model: BLU-1100 Blunami Sound Set: EMD-2 Diesel Scale: N, HO and small S scale Decoder Size: 31 x 10.5 x 5mm Connection: Hardwire (single wires) Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD-2 sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD-2 or plain EMD — which do I want?This is the EMD-2 set: a second collection of less-common EMD prime movers, called out by cylinder count. The plain EMD set covers the more common 567/645/710 variants. Match the list above to your prototype. Will it fit my locomotive?This one measures 31 x 10.5 x 5mm and connects by hardwire (single wires). Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.
$140.76
The SoundTraxx 885604 is a BLU-1100 Blunami digital sound decoder with the Baldwin & Other sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is the most compact decoder in the Blunami line — small enough for N scale, suited to N, HO and small S scale. Features 12 Baldwin & Other prime movers: Baldwin VO, Baldwin 608NA, Baldwin 608A, Baldwin 606NA, Rio Grande Southern Galloping Goose, Dual Whitcomb, Fairbanks-Morse, GE GTEL UP “Slab Side”, GE GTEL UP “Veranda”, GE GTEL UP “Big Blow” A unit, GE GTEL UP “Big Blow” B unit, Cummins QSK19C x3 GenSet Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885604 Model: BLU-1100 Blunami Sound Set: Baldwin & Other Diesel Scale: N, HO and small S scale Decoder Size: 31 x 10.5 x 5mm Connection: Hardwire (single wires) Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Baldwin & Other sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 12 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Will it fit my locomotive?This one measures 31 x 10.5 x 5mm and connects by hardwire (single wires). Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.
$140.76
The SoundTraxx 885603 is a BLU-1100 Blunami digital sound decoder with the ALCO sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is the most compact decoder in the Blunami line — small enough for N scale, suited to N, HO and small S scale. Features 9 ALCO prime movers: ALCO 539 Turbo, ALCO 539 Non-Turbo, ALCO 244 Turbo, ALCO 251A i6, ALCO 251C v12, ALCO 251C v12 Super Charged, ALCO 251C v12 Century Series, ALCO 251C v16, ALCO 251C v16 Super Charged Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885603 Model: BLU-1100 Blunami Sound Set: ALCO Diesel Scale: N, HO and small S scale Decoder Size: 31 x 10.5 x 5mm Connection: Hardwire (single wires) Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other ALCO sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Will it fit my locomotive?This one measures 31 x 10.5 x 5mm and connects by hardwire (single wires). Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.
$140.76
Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze. We offer 11 colors to match the NMRA and SoundTraxx standards. SoundTraxx 810142 - Black SoundTraxx 810143 - Orange SoundTraxx 810144 - Purple SoundTraxx 810145 - Gray SoundTraxx 810146 - White SoundTraxx 810147 - Green/Yellow Stripe SoundTraxx 810148 - Blue SoundTraxx 810149 - Red SoundTraxx 810150 - Brown SoundTraxx 810151 - Yellow (Current Selection) SoundTraxx 810152 - Green More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.
$7.16
