Trains & Track

1366 products

  • Broadway Limited 6862 | EMD F7 A/B, DRGW 5641/5642, Single Stripe Scheme, A-unit Paragon4 Sound/DC/DCC, Unpowered B - Squeaky's Trains Broadway Limited 6862 | EMD F7 A/B, DRGW 5641/5642, Single Stripe Scheme, A-unit Paragon4 Sound/DC/DCC, Unpowered B - Squeaky's Trains

    Broadway Limited Imports Broadway Limited 6862 | EMD F7 A/B, DRGW 5641/5642, Single Stripe Scheme, A-unit Paragon4 Sound/DC/DCC, Unpowered B

    Out of stock

    The EMD F3 is a 1,500 horsepower diesel locomotive built by General Motors' Electro-Motive Division between 1945 and 1949.   The F3 was the third model in EMD's successful F-unit series of cab unit diesels, and it was the second most produced of the series behind the F7.  The F3's were widely used in both freight and passenger service, and in total, EMD built more than 1,100 A-units and almost 700 B-units.  In this production, we are modeling A and B-units from nine railroads with prototypically accurate road numbers and paint schemes.  We are offering A-B sets with Powered A-units (w/ Paragon4 Sound) and unpowered B-units, and also separate single A and B-units with our full Paragon4 DC/DCC/Sound system.  All of our models have road-specific details and lighting.  Road-specific detail options in this production, prototypically accurate for each road name: Pilot prototypical for paint scheme Operating Mars Light where prototypical Small horizontal and Large 45-degree numberboards Prototypical horn Water fill hatch location Sand fill hatch location Dynamic brake where prototypical Cooling fans and exhaust hatch accurate per each prototype  Winterization hatch present where prototypically accurate Multiple MU door options on front of model Multiple skirt options above fuel tank Ladder rest grab irons present where prototypically accurate Grab iron ladder present where prototypically accurate Eyebrow grab irons present where prototypically accurate Grab irons above cab side windows where prototypically accurate Roof antenna present and correct where prototypically accurate Front and Rear lift lug present where accurate Nose door number plate present where accurate Trainphone antenna present where accurate   Industry-leading Model Features:    Paragon4 Sound & Control System featuring ROLLING THUNDER Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation All Wheel Electrical Pick-up ABS Body with Die Cast Chassis for Maximum Tractive Effort Premium Caliber Painting Prototypically Accurate Paint Schemes and Road Numbers Many Separately Applied Details such as Grab Irons, Horns, and Bell Prototypical Light Operation Prototypically Accurate Sounds for the EMD F3 Diesel Locomotive Metal Kadee-compatible Couplers (2) Will Operate on Code 55, Code 70 and Code 80 Rail Minimum Operating Radius:  9 inches     Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.    Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings

    Out of stock

    $263.99

  • Broadway Limited 7237 | UP Big Boy #4014, Promontory Excursion, Glossy Finish, Challenger Excursion Tender, Paragon4 Sound/DC/DCC, Smoke | N Scale - Squeaky's Trains

    Broadway Limited Imports Broadway Limited 7237 | UP Big Boy #4014, Promontory Excursion, Glossy Finish, Challenger Excursion Tender, Paragon4 Sound/DC/DCC, Smoke | N Scale

    Out of stock

    Often called the largest steam loco ever made, and certainly a contender for the Worlds Most Famous Locomotive, the Big Boy was forged under some of the most strenuous demands ever placed on a locomotive. The UP Railroad needed a locomotive that could be used to pull a 3,600-ton train over Sherman Hill and the 1.14% grade from Ogden to Wasatch, Utah without the need for helpers. When the design specifications were complete, it was decided on the use of a simple articulated, high speed, 132 ft. long locomotive sporting sixteen 68 diameter drive wheels. What they created was the longest and among the heaviest, most powerful steam locomotive legends in the world. And had not the worker at ALCO chalked Big Boy on the side of the smoke box of one of the 4-8-8-4s under construction, a name that immediately caught on, it is rumored that the name of the type would have been Wasatch, for the mountains they were built to conquer. Quote from Worlds Greatest Steam Locomotives by Eugene L. Huddleston: There were 25 locomotives fabricated in two different groups. Class 1 were locomotives #4000-4019 and Class 2 was numbered 4020-4024. The first Big Boy #4000 was delivered to Omaha, NE on September 5, 1941.  The Union Pacific Railroad's commitment to the Big Boy required them to replace the lighter rail and straighten out many miles of track for clearance as well as to resize elements of their service areas (such as turntable lengths, etc.) for the entire line these locos would run on. The Big Boys demonstrated fantastic strength and speed as they faced these challenges throughout their storied careers. With the total mileage on the Big Boy fleet being approximately 1,000,000 miles for each locomotive, one must say that they earned their reputation. Several examples remain in museums around the country but silently they sit as a visual echo to the thunder that once made them revered throughout the landscape that the Big Boys dominated. In our first production of this model in N scale, BLI is modeling the Union Pacific Big Boy with these notable features: Accurately modeled front end with appropriate aftercooler system for each class Accurately modeled 25-C-100 and 25-C-400 tender, appropriate for each class Accurately modeled oil tender for #4014 which operates in excursion service today Two models painted in attractive two-tone gray paint schemes that the Big Boys never received in real life  Industry-leading Model Features:    Paragon4 Sound & Control System featuring ROLLING THUNDER Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation Operating Smoke Unit with On/Off Switch Six Drivers and All Tender Wheels Pick-up Electricity from Track Die Cast Locomotive Body with Die Cast Chassis for Heavier Weight and Maximum Tractive Effort Rubber Tires on Two Drivers for Additional Tractive Effort Premium Caliber Painting Prototypically Accurate Paint Schemes and Road Numbers Many Separately Applied Details such as Handrails, Grab Irons, Piping, Tender Ladders, Whistle, and Bell Prototypical Headlight and Rear Light Operation Separately Controllable Cab Light and Lighted Numberboards Prototypically Accurate Sounds for the Union Pacific Big Boy Operating Microtrains-compatible Couplers Will Operate on Code 55, Code 70, and Code 80 Rail Minimum Operating Radius:  9.75 inches     Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.    Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings

    Out of stock

    $479.99

  • Kadee 500 | Bettendorf 50-ton Trucks with 33" Smooth Back Wheels - Metal Fully Sprung | HO Scale - Squeaky's Trains Kadee 500 | Bettendorf 50-ton Trucks with 33" Smooth Back Wheels - Metal Fully Sprung | HO Scale - Squeaky's Trains

    Kadee Kadee 500 | Bettendorf 50-ton Trucks with 33" Smooth Back Wheels - Metal Fully Sprung | HO Scale

    1 review

    Out of stock

    #500 Bettendorf 50-ton Trucks with 33" Smooth Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks Mounts with a #2 or 2-56 screw.Mounting Screws not Included. The Bettendorf Double Truss Truck was introduced in the 1930's by U.S. railroads and was allowed to be used in interchange service through 1993. The Kadee® #500, #502 & #550 represent 50- ton trucks for 100,000 pound cars. HO-Scale Metal Fully Sprung Trucks Features: Code 110 (.110) #520 33" Smooth Back Wheels Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #637 HO Scale Truck Springs Patent number 5,768,999 Package Includes: (2) Each #500 Bettendorf 50-ton Trucks (assembled) The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

    Out of stock

    $8.99

  • Kadee 38 | 30-Series Plastic Couplers with Gearboxes - Medium (9/32") Underset Shank - Squeaky's Trains Kadee 38 | 30-Series Plastic Couplers with Gearboxes - Medium (9/32") Underset Shank - Squeaky's Trains

    Kadee Kadee 38 | 30-Series Plastic Couplers with Gearboxes - Medium (9/32") Underset Shank

    Out of stock

    This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #38 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #148 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #38 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.   Two pair per package   Made in the U.S.A. HO-Scale Package Includes: (2) Pair #38 Plastic Shank Couplers - Medium Underset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #38 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Underset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #38 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #38 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary)

    Out of stock

    $3.99

  • Bachmann 691 | Thoroughbred Train Set | HO Scale - Squeaky's Trains Bachmann 691 | Thoroughbred Train Set | HO Scale - Squeaky's Trains

    Bachmann Bachmann 691 | Thoroughbred Train Set | HO Scale

    Out of stock

    Wheels rumble like the pounding of hooves as this iron horse rounds the bend. Hauling freight with the ease and grace of a champion, the Thoroughbred delivers fun and adventure to your stable of trains. This ready-to-run train set includes: F7 diesel locomotive with operating headlight open quad hopper gondola wide-vision caboose body-mounted E-Z Mate®  couplers 47" x 38" oval of snap-fit E-Z Track®  including 12 pieces of curved track, 1 piece of straight track and 1 plug-in terminal rerailer power pack and speed controller illustrated instruction manual

    Out of stock

    $145.99

  • JT's Mega Steam 139 | Lumber Mill Fluid 2 Oz. Bottle - Squeaky's Trains

    JT's Mega Steam JT's Mega Steam 139 | Lumber Mill Fluid 2 Oz. Bottle

    Out of stock

    Brand: JT's Mega Steam Scent: Lumber Mill Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

    Out of stock

    $9.99

  • JT's Mega Steam 137 | Forest & Stream Fluid 2 Oz. Bottle - Squeaky's Trains

    JT's Mega Steam JT's Mega Steam 137 | Forest & Stream Fluid 2 Oz. Bottle

    Out of stock

    Brand: JT's Mega Steam Scent: Forest & Stream Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

    Out of stock

    $6.79

  • Kadee 522 | 36" Diameter Smooth Back Metal Code 110 Wheels - Freight and Passenger | HO Scale - Squeaky's Trains Kadee 522 | 36" Diameter Smooth Back Metal Code 110 Wheels - Freight and Passenger | HO Scale - Squeaky's Trains

    Kadee Kadee 522 | 36" Diameter Smooth Back Metal Code 110 Wheels - Freight and Passenger | HO Scale

    2 reviews

    Out of stock

    #522 - 36" Diameter Smooth Back Wheelsets (Code 110) - HO Scale Smooth wheelsets are most commonly found on diesel era rolling stock. Kadee® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles. Twelve Sets (1 Set = 1 Axle) Axle Tip to Tip: 1.018" Wheelset Features: Code 110 (.110") 36" Smooth Back Wheels Accurate markings Incredible detail true to prototype Non-magnetic Metal Wheels Smooth tracking Free rolling Contoured Insulated Axles RP-25 Free rolling wheels Needlepoint Axles Axle Tip to Tip: 1.018" Freight & Passenger Package Includes: (12) Sets #522 36" Diameter Smooth Back Wheelsets (Code 110)   The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

    Out of stock

    $12.79

  • Kadee 141 | 140-Series Whisker® Metal Couplers with Gearboxes - Long (25/64") Underset Shank | HO Scale - Squeaky's Trains Kadee 141 | 140-Series Whisker® Metal Couplers with Gearboxes - Long (25/64") Underset Shank | HO Scale - Squeaky's Trains

    Kadee Kadee 141 | 140-Series Whisker® Metal Couplers with Gearboxes - Long (25/64") Underset Shank | HO Scale

    Out of stock

    This industry leading coupler features an all metal coupler head, shank, and Whisker® centering spring and comes complete with insulated draft gearbox and lid. The #141 Magne-Matic® Whisker® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #21 coupler. HO-Scale Package Includes: (2) Pair #141 Whisker® Metal Couplers - Long Underset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #141 Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Underset Knuckle Spring  -   #622 Centering System  -   Whisker® Head  -   Standard Head Works In Place of  -   #21, #31 (#141 in a #252 box), long underset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   25/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

    Out of stock

    $4.79

  • Kadee 22 | 20-Series Plastic Couplers with Gearboxes - Medium (9/32") Overset Shank | HO Scale - Squeaky's Trains Kadee 22 | 20-Series Plastic Couplers with Gearboxes - Medium (9/32") Overset Shank | HO Scale - Squeaky's Trains

    Kadee Kadee 22 | 20-Series Plastic Couplers with Gearboxes - Medium (9/32") Overset Shank | HO Scale

    Out of stock

    This industry leading coupler features plastic standard coupler with metal knuckle, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The#22 Magne-Matic® Metal Coupler may be mounted with the included #213 or #232 Gearbox or with most other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #22 Plastic Shank Couplers - Medium Overset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair 055" ID & .100" ID Bushing/Sleeves (2) Pair #212 Talgo Truck Adaptors (2) Pair #213 Gearboxes (2) Pair #232 Gearboxes (2) #622 Knuckle Springs #22 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -  Overset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   Standard Head Works In Place of  -  #142, Medium Overset "clone" couplers Works With  -   #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #212 Talgo Truck Adaptors: Material  -   Insulated Plastic Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #213 Plastic Draft Gearboxes: Material  -   Insulated Plastic Dimensions  -   25/64"L x 5/16"W x 3/32"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #232 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers #22 with a #212 Talgo Truck Adaptor. Mounting Specifications: Centerline  -   25/64" Trip Pin Height  -   1/32" #22 in a #213 monted on bottom. Mounting Specifications: Mounting Height  -  1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #22 in a #213 monted on top. Mounting Specifications: Mounting Height  -   13/32" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #22 in a #232 Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #230 Talgo Adaptor Insertion Pic #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #780 Tap (0-80) and Drills (#55 and #52)

    Out of stock

    $4.99

  • Atlas 544 | Code 83 22″ Radius Left Manual Snap-Switch Nickel Silver Rail | HO Scale - Squeaky's Trains

    Atlas Model Railroad Co. Atlas 544 | Code 83 22″ Radius Left Manual Snap-Switch Nickel Silver Rail | HO Scale

    Out of stock

    Code 83 HO Scale Nickel Silver Rail 22″ Radius Left Manual Snap-Switch

    Out of stock

    $15.95

  • WalthersMainline 910-3126 60' High-Cube Plate F Boxcar TTX #636710 America's 250th Anniversary HO Scale

    WalthersMainline WalthersMainline 910-3126 | 60' High-Cube Plate F Boxcar - TTX #636710 America's 250th Anniversary | HO Scale

    Out of stock

    The WalthersMainline 910-3126 brings TTX's patriotic red, white, and blue 60' High-Cube Plate F Boxcar to your HO layout in sharp detail. This ready-to-run model features road number 636710 in the special America's 250th Anniversary scheme, making it a standout addition for modern-era freight operations. These taller, longer cars are a railroad workhorse, hauling everything from lumber to appliances across the real-world Class I network. Looking for more HO rolling stock? Browse our HO Trains & Track and HO Track & Accessories. Features Striking patriotic red, white, and blue paint scheme with stars and stripes celebrating America's 250th Anniversary Separately applied grab irons, ladders, and brake detail for realistic appearance Proto-MAX metal knuckle couplers for reliable operation Metal wheelsets for smooth, weighted rolling 60' High-Cube Plate F prototype with horizontal posts — a modern-era mainline staple Scale: HO (1:87) More Information Brand WalthersMainline Item Number 910-3126 Scale HO (1:87) Car Type Boxcar Road Name TTX (Trailer Train) Road Number 636710 Era Modern Coupler Proto-MAX metal knuckle Condition New FAQ Is this car sold individually or as a set?This is a single car, sold individually. Pair it with other TTX or modern freight cars to build a realistic consist. What couplers does it come with?It includes Proto-MAX metal knuckle couplers, which are compatible with Kadee and other knuckle-style couplers. Does it have metal wheels?Yes, metal wheelsets are included for better tracking and added weight.

    Out of stock

    $33.98

© 2026 Squeaky's Trains & Things, Powered by Shopify

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account