Best Sellers

The Digitrax SDH167D is a powerful and versatile sound decoder designed for HO scale model trains. With advanced features such as Series 7 sound technology, this decoder delivers high-quality sound effects and enhances your model railroad experience. Easy to install and compatible with most DCC systems. 2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm 16 x 26 x 9mm Box Speaker 300uF Capacitor More Information Item # SDH167D Brand Digitrax Scale HO Scale MSRP 49.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax LNC82 is a 2-pack of 8-foot LocoNet cables — the standard RJ12 6-conductor cables you need to wire up a Digitrax DCC system. Use them to connect throttles to UP5 panels, link LocoNet peripherals (BDL16, BDL168, DS64, etc.), or extend a LocoNet bus across your layout. Two cables in every package. Looking for more DCC wiring and accessories? Browse our Electronics & Wiring and DCC Decoders collections. Features 2 cables per package — 8 feet long each. RJ12 6-position / 6-conductor (6P6C) plugs on both ends — matches every Digitrax LocoNet jack. Flat ribbon cable construction — runs neatly along benchwork edges. Works with all Digitrax DCC systems — Zephyr, Super Empire Builder, Super Chief, DCS210, DCS240, etc. Length sufficient for typical throttle-to-panel runs and panel-to-panel hops on home layouts. More Information Brand Digitrax Item Number LNC82 Type LocoNet cable — RJ12 6P6C Length 8 feet each Quantity 2 cables per pack Plug RJ12 6-position 6-conductor (6P6C) on both ends System Digitrax LocoNet Condition New — sealed UPC 652667180061 FAQ Are these standard phone cables?They look similar, but Digitrax LocoNet uses 6-position 6-conductor (6P6C) wiring, not the 6P4C found in many phone cables. Use these LocoNet-spec cables to avoid wiring issues — or any high-quality 6P6C cable will work. What can I connect with them?Throttles to UP5/UP6 plug-in panels, BDL16/BDL168 detection boards to the LocoNet bus, DS64 stationary decoders, SE8C signal decoders, PR4 USB interfaces, and any other LocoNet peripheral. Will 8 feet be long enough?For most home layouts, yes — 8 feet covers a typical throttle reach from one UP5 panel to another. For larger layouts you may need longer cables (Digitrax LNC25 is 25 ft) or chain multiple LNC82s through UP panels. Do they work with non-Digitrax DCC systems?No — LocoNet is Digitrax's proprietary throttle bus. NCE, MRC, and other DCC systems use different cab buses and connectors.

Read more less

The Digitrax DHWHP harness is expertly designed to connect your 9-pin locomotive to a DCC medium plug, allowing for seamless and efficient communication. With a generous 3-inch length, this harness provides flexibility and easy installation. Upgrade your locomotive's performance with this high-quality harness. More Information Item # DHWHP  Brand Digitrax  MSRP $8.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet, Decoder Manual V1, Decoder Manual V2, Specification Sheet

Read more less

Efficiently manage and detect occupancy and transponding in 4 sub-districts with Digitrax PM74. This power manager is perfect for multiple scales and ensures a smooth and reliable operation. Trust in its advanced capabilities for a seamless experience. 4 Power Manager sub-districts. Upgraded replacement for PM42, fully encased. Fully connectorized installation. Each Power sub-district / Detection Section (DS) supports Auto-reverse or Short circuit management. Each DS supports Occupancy detection. Each DS supports Transponding detection. Allows Mainline CV Read/Write program of compatible decoders. Remote LED status support. Series7 style advanced installation support using DT602. Replaces PM42 Quad Power Manager. More Information Item # PM74 Brand Digitrax Scale Multi Scale MSRP $109.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

This Digitrax STAW Stow Away Throttle Holder is the perfect solution for storing and organizing your throttle controls. With its compact design and easy installation, it allows for efficient use of space and quick access to your throttles. Keep your workspace clutter-free and your throttles within reach with this 1 pack stow away holder. Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day Warranty On Materials & Workmanship Only. More Information Item # STAW Brand Digitrax Warranty No Worries Warranty (read more) MSRP $14.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax UP7 LocoNet Universal Panel is the fascia-mounted plug-in point that turns a LocoNet layout into a true walkaround railroad. Mount one every few feet along the fascia and operators can plug in a throttle, walk with their train, and unplug at the far end without ever dropping the session. Two front throttle jacks, three more LocoNet jacks for daisy-chaining, optional throttle charging, and a Track Status LED make the UP7 the modern drop-in replacement for the long-running Digitrax UP5 panel. Looking for more DCC gear? Browse our DCC Accessories, DCC Wiring, and DCC Decoders. Features Two front-panel RJ12 throttle jacks so operators can plug in, unplug, and walk the layout without ever interrupting the LocoNet session. Three more RJ12 LocoNet jacks (two rear, one side) make daisy-chaining panels and routing LocoNet cable around the layout straightforward. Optional throttle charging for DT602 and UT6 throttles, with power sharing across up to six UP7 panels so batteries stay topped off between operating sessions. Track Status LED gives an at-a-glance check that the section is powered, which makes troubleshooting far quicker. Plug-and-play installation - fully connectorized, no soldering required. Cut a 2.6 x 1.7 inch fascia opening, fasten with four #6 screws, and plug it in. Direct replacement for the Digitrax UP5 with the same LocoNet compatibility and an updated design. Scale: All Scales (Z through G) - works with any LocoNet-equipped Digitrax command station. More Information Brand Digitrax Item Number UP7 Product Type LocoNet Universal Panel (DCC Fascia Panel) Scale All Scales (Z, N, HO, O, G) Front Throttle Jacks 2 x RJ12 Additional LocoNet Jacks 3 x RJ12 (2 rear, 1 side) for daisy-chaining Throttle Charging Optional - DT602 and UT6, requires external 12V DC supply Track Status LED Yes, bi-color Power Input 2mm jack, 12V DC (Digitrax PS14 recommended) Cable Type 6-conductor flat cable with RJ12 6-pin connectors Fascia Cutout Approx. 2.6 in. W x 1.7 in. H, four #6 screws Replaces Digitrax UP5 Condition New UPC 625667110123 FAQ Will the UP7 work with my Digitrax system?Yes. Any Digitrax command station or booster with a LocoNet port works, including the Zephyr Express, DCS210+, DCS240+ and older LocoNet systems. Plug it in with standard LocoNet cable and it is ready to use. Do I need a power supply for it?Not for normal operation - LocoNet runs the panel on its own. Add a 12V DC supply such as the Digitrax PS14 only if you want the panel to charge DT602 or UT6 throttles while LocoNet is asleep. Can I use the UP7 to replace a UP5?Yes. The UP7 is the direct successor to the UP5 with the same LocoNet function, so it is the normal upgrade path for existing panels. How many panels does a layout need?Most operators mount one every 6 to 10 feet of fascia so a throttle jack is never more than a few steps away as you follow your train. What cable does it use?Standard 6-conductor flat LocoNet cable with RJ12 6-pin connectors - the same cable used throughout a Digitrax LocoNet layout.

Read more less

The Digitrax UR93 Duplex Radio Transceiver is a multi-scale solution for model train enthusiasts. With its advanced technology and reliable performance, this transceiver allows for effortless control of multiple trains on a single layout. Enjoy the convenience and precision of a duplex radio system with the Digitrax UR93. UR93 Features: Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Improved multi-path performance for cluttered layouts. Plug and Play setup, PS14 Universal power supply included. Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and improved reception. Status LEDS. Supports combinations of DT602D/DE and DT500D, DT402D and UT4D Duplex Radio throttles. UR93E available for countries that require EN-300-328 Wireless conformity. More Information Item # UR93 Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet / Instruction Sheet

Read more less

Digitrax LNCCMC1 Coiled Cord & RJ12 Modular Adapter makes it easy to add a coiled cord to your LocoNet throttle without soldering. Designed for use with all Digitrax throttles, this convenient adapter plugs directly into your existing throttle plug and adds a flexible coiled cord for improved usability and layout comfort. Adds a coiled cord to your LocoNet throttle No soldering required Includes RJ12 modular adapter Compatible with all Digitrax throttles Ideal for upgrading straight cord throttles More Information Brand Digitrax Model Number LNCCMC1 Product Type LocoNet Accessory Compatibility All Digitrax Throttles MSRP $18.00 Warranty 90 Day Limited Warranty HS Code 9503.00.00 Frequently Asked Questions Does this require soldering?No. The LNCCMC1 plugs directly into your existing throttle connection using the included modular adapter. Will this work with older Digitrax throttles?Yes. It is compatible with all Digitrax LocoNet throttles. What does this improve?It replaces or adds a coiled cord for better flexibility and strain relief compared to straight cords.

Read more less

A dummy plug is what keeps a converted N scale locomotive running on DC while you wait to fit a decoder. Plug a DNDP into the harness in place of the decoder and the motor circuit is completed for plain DC operation; pull it out, drop the decoder in, and the same locomotive is DCC. This is a five-pack, which is the sensible way to buy them - they are small, easy to lose, and you always need one at the wrong moment. Building a DCC fleet? Browse our DCC Decoders, DCC Wiring, and DCC Accessories. Features Run the same locomotive as DC or DCC - the dummy plug completes the circuit for DC, the decoder replaces it for DCC. Five per pack. These are tiny parts that disappear into the carpet; a spare or four is worth having. For use with the Digitrax DNWH and DNWHPS N scale harnesses. No soldering and no tools - it is a plug swap. Also useful when selling on or storing a locomotive you want to leave in DC condition. More Information Brand Digitrax Item Number DNDP Product Type DC Dummy Plug Scale N Quantity 5 pack Use With Digitrax DNWH and DNWHPS N scale harnesses Purpose Completes the motor circuit for DC operation Condition New FAQ What does a dummy plug actually do?It bridges the motor and pickup connections so the locomotive runs on plain DC. Without it, or without a decoder in its place, the circuit is open and the loco will not move. Do I need one if I am fitting a decoder?No. The decoder takes the dummy plug's place in the harness. Keep the plug somewhere safe though - you will want it if you ever pull the decoder out for another project or sell the loco as DC. Will these work in HO?These are the N scale version, for the DNWH and DNWHPS harnesses. HO installs use the corresponding HO parts. Why five?Because they are small, unlabelled and easy to lose, and because most people converting a fleet are doing several locomotives at once.

Read more less

Increase your mobility with the Digitrax BP600MH battery pack for DT602 Series Throttles. Featuring a long-lasting rechargeable battery, this pack allows you to control your train layout without being tethered to an outlet. Say goodbye to cords and hello to convenience with the Digitrax BP600MH. Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works with DT602 Family of throttles. More Information Item # BP600MH Brand Digitrax Scale N/A MSRP $13.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

Everything you need to get started with Advanced Digitrax Command Control. Evolution Express is perfect for most home and club layouts wanting Duplex Radio control out of the box. It offers excellent speed control, prototypical consisting, the full range of programming features and much more. Maximum capacity, maximum features.  Take it to the Max with Evolution Express! Evolution Express Duplex Set Includes: DCS210+ Command Station/Booster With Intelligent AutoReverse DT602D Super LocoNet Throttle UR93 Duplex Radio Transceiver Panel PS615 Power Supply PS14 Power Supply (For UR93) Evolution Manual The DT602D Advanced Super Throttle & DCS210 Advanced Command Station Offers Works with compatible LocoNet systems Color 2.4” LCD Display Screen Full Duplex radio when paired with a UR92 or compatible Duplex Transceiver (sold separately) Advanced menu system and displays Built-in scrolling help and prompting Soft ON/OFF switch, with zero OFF power-drain Advanced display Power Saving for longer wireless battery operation Throttles are now powered in wireless modes by 3 AA cells! No more 9V batteries to remove! Can use recharged AA batteries Works in standard tethered, IR or Radio Duplex modes Duplex Scan for available Networks and radio signal strength. Run without cords! All throttles come with a LocoNet cord that can be unplugged, and is replaceable Dual throttle controls let you control two locos simultaneously Run locomotives with “encoder click” knobs for both speed and direction control Full numeric keypad makes loco selection simple Control light and sound effects functions with the press of a button Control 29 functions (F0-F28). Function active/inactive indicators Convenient step-by-step throttle option set up Supports simplified decoder programming Simplified 2 or 4 digit addressing setup Over 9,000 locomotive decoder addresses Supports turnout and stationary decoder control Over 2000 turnout decoder addresses Fast clock display Recall feature Advanced Route editor Big System Capacity for Big Layouts Run up to 100 addresses at the same time on your system. Run up to 100 throttles at the same time on your system. Over 9000 Locomotive Addresses Address 00 for operation of one loco or MU consist without decoders Two Digit Addressing is easy to use. (Address 01-127) Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+) 5 or 8 Amps of Power to Run More Trains Selectable Scale Voltage for Safe Operation in ALL Scales Customizable Voltage Settings 5 amps of power with included PS615 power supply 8 amps with PS2012E power supply (sold separately) Function Control Control 29 functions (F0-F28). Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down. Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities). Two DCC Outputs are Better than One! Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders! Use one output for a braking section while the other runs the layout. Decoder Programming Built in read/write programmer lets you program and read back CV values. Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming Consisting Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos. Advanced consisting and Basic consisting, too! Nested consisting where consists can be consisted together. Stationary Decoders, Turnout Control & Turnout Position Reporting Access to stationary decoder control for turnouts and other devices. DT602 reports turnout position based on last command sent. Control 2000+ stationary decoder addresses. Routes Turnout List/Route capability to simplify complex yard operations. EZ routes button for simplified Command Station route programming Customizable System Options Turn audible warnings on or off. Set up purging options. Multi-format command station mode. Loco Reset button for easy system purging UR93 Duplex Radio Transceiver Panel Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Plug and Play setup, PS14 Universal power supply included. Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and reception. Status LEDS. Supports combinations of DT602D/DE and DT500D, DT400D and UT4D Duplex Radio throttles. UR93E available for countries that require EN-300-328 Wireless conformity. Expandability Evolution is just the beginning for large, complex layouts that emphasize prototypical operations. With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more. DCS210+ comes with 3 LocoNet ports for easy expandability and a USB Interface! Other Advanced Features IPL updatable firmware for continued product improvements Device Query and Device Statistics to help with troubleshooting Input Mode to help set up detection on your layout Uses Expanded slots More Information Item # EVOXD Brand Digitrax Scale Multi Scale MSRP 655.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manual View/Download Firmware DT602 Firmware

Read more less

Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price.  It offers simplified advanced train operation for any size layout and is fully expandable.  You won’t have to start over when you want to do more with your railroad. Zephyr Express Set Includes: DCS52 All-In-One Throttle/Command Station/Booster to run your layout PS314 Power supply to provide power to run your DCS52 Zephyr Express Quickstart Guide Zephyr Express Manual   Zephyr Express Offers: Cost effective entry level LocoNet Compatible system Color 2.4” LCD Screen. Large Backlit Keypad. Speed control knob and direction switch with brake. Integrated USB Computer Interface Easy 2 and 4 digit addressing. Smooth speed control. Run multiple trains at once without blocking! Run up to 20 addresses at the same time on your system. Run up to 20 throttles at the same time on your system.   Jump Ports for using DC power packs as additional throttles Use one or two smooth DC power packs as throttles to control DCC equipped locomotives. Simple, cost effective way to add more throttles to your Zephyr Express set. Makes it easy to share the fun of DCC with layout visitors and young operators. Functions on locos controlled by Jump throttles remain active. Over 9000 Locomotive Addresses Use Address 00 to run one or more locos without DCC decoders Two Digit Addressing is easy to use. (Address 01-127) Four Digit Addressing-use the number painted on your engines as its address.   3.0 Amps of Power to run multiple trains. Booster outputs 13V DC for safe operation in N and HO scales. Function Control Control lights and sound with 29 functions (F0-F28) Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down. Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder). Stationary Decoders, Turnout Control & Turnout Position Reporting Access to stationary decoder control for turnouts and other devices. Control 2000+ stationary decoder addresses. Consisting Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos. Advanced consisting, allows only advanced consist capable mobile decoders. Basic consisting, program decoders to run on same address. Decoder Programming Built in read/write programmer that can read and write all CVs. Supports Direct programming (Digitrax preferred method). Also supports paged & register mode programming. Operations mode programming can be used to program decoders on the layout. Expandability with Digitrax LocoNet Use Zephyr Express as a starting point for your Digitrax LocoNet System, then add components. Use Zephyr Express as an expansion set with Digitrax equipment you already have installed. Add Radio or IR via LocoNet. Just plug-in a UR90, or UR92 receiver and add IR and/or Radio throttles. Comes Complete with DCS52 Command Station, PS314 Power Supply, and System Reference Manual. More Information Item # ZEPE / DCS52  Brand Digitrax Scale Multi Scale MSRP 245.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Zephyr Express Manual V2 /Quickstart Guide / Decoder Manual V2 / Specification Sheet / Zephyr Express Manual V1

Read more less