Coupons

Use on business structures and rural outbuildings, billboards, signs, factory docks and more. 20mA set Dimensions - 0.484" w x 0.283" h (12.3 mm w x 7.2 mm h) RoHS Compliant

Read more less

The SoundTraxx 884009 is a TSU-4400 Tsunami2 digital sound decoder with the Steam-2 sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the big-scale decoder: a 4-amp motor rating and screw terminals instead of solder joints, rated 4A and suited to some S, O and Large Scale locomotives. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 90 selectable whistles — 27 more than the standard Steam set — plus 10 exhaust chuffs, 12 bells, 10 airpumps and 8 dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 884009 Model: TSU-4400 Tsunami2 Sound Set: Steam-2 Steam Scale: some S, O and Large Scale locomotives Decoder Size: 69 x 30.5 x 14mm Connection: Universal-style with screw terminal blocks (no soldering) Max. Motor Stall Current: 4A Function Outputs: 6 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7V – 27V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Steam-2 sound profile decoders. A speaker is not included — browse DCC speakers rated 3 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 69 x 30.5 x 14mm and connects by universal-style with screw terminal blocks (no soldering). Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 3 watt or better that fits your shell. How is Steam-2 different from the standard Steam set?The chuffs, bells, airpumps and dynamos are the same. The difference is the whistle library: Steam-2 offers 90 whistles against 63 on the standard Steam set, with many roadname-specific additions. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 885022 is a TSU-2200 Tsunami2 2-amp DCC sound decoder carrying the EMD-2 diesel sound set. EMD-2 is SoundTraxx's second collection of EMD prime movers, covering the 567, 645 and 710 variants that the standard EMD profile leaves out. If you model a GP9, SD9, GP39, SD45, GP60, SD70MAC or any of the other locomotives listed below, this is the sound set built for it. Tsunami2 combines a full sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a DCC decoder on one board. A 32-bit processor drives 28 functions and 16 polyphonic sound channels, so the prime mover, horn, bell and brake squeal all play at once without cutting each other off. Dynamic Digital Exhaust reads the load on the motor and notches engine RPM up and down on its own, so pulling a heavy train upgrade actually sounds like work. This is a universal, hardwire-style decoder measuring 35 x 18 x 6mm, sized for a wide range of HO and S scale diesels. Which Locomotives Does the EMD-2 Sound Set Cover? The 885022 carries eight selectable EMD prime movers. Pick the one that matches your locomotive with a single CV change. Locomotive assignments below follow SoundTraxx's own diesel sound selection reference. EMD 567, 12-cylinder, no transition NW2, NW3, NW5, SW7, SW9, SW1200 EMD 567C, 16-cylinder, non-turbo F9, FP9, GP9, SD9 EMD 645E, 12-cylinder, non-turbo GP15-1, GP15AC, SW1500, SW1504, MP15AC, MP15DC EMD 645E, 12-cylinder, turbo GP39, GP39-2, SD39, SDL39 EMD 645F, 16-cylinder, turbo GP40X, GP50, SD40X, SD50 EMD 645E, 20-cylinder, turbo F45, FP45, SD45, SD45X, SD45-2, SDP45, SD45T-2 EMD 710G, 12-cylinder F59PH, F59PHI, GP59 EMD 710G, 16-cylinder GP60, GP60M, GP60B, SD60, SD60M, SD60I, SD60F, SD70, SD70M, SD70I, SD70ACU, SD70MAC, SD70M-2, SD75I, SD75M Features Eight EMD-2 prime movers selectable by CV, covering the 567, 645 and 710 engines listed above Over 40 selectable air horns, plus bells, air compressors, couplers and dynamos, for more than 50 individual sound effects Dynamic Digital Exhaust (DDE) matches exhaust volume and engine RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking, each with variable load sound Hyperdrive2 motor control for smooth creep-speed switching and prototypical momentum Over 20 Hyperlight lighting effects spread across six function outputs 16 polyphonic sound channels so horn, bell and prime mover never cut each other off CurrentKeeper ready with an onboard quick-plug connector for the SoundTraxx 810140 2-watt audio amplifier into an 8-ohm load, enough for a full-size HO speaker Specifications Item Number: SoundTraxx 885022 UPC: 812165023257 Decoder Model: TSU-2200 Tsunami2 Sound Profile: EMD-2 Diesel Scale: HO to S scale Connection Type: Universal hardwire Decoder Size: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V to 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Brand: SoundTraxx Frequently Asked Questions What is the difference between the EMD and EMD-2 sound sets?Both cover EMD diesels. The original EMD profile carries the most common prime movers, such as the 567 non-turbo in F-units and early Geeps and the 645 turbo in the SD40-2 and SD45. EMD-2 carries a second group of engines, including the 567C in the GP9 and SD9, the 645E 20-cylinder in the SD45 family and the 710G 16-cylinder in the SD60 and SD70 series. Check the coverage table above for your locomotive. If it is not listed there, the 885005 EMD profile is the one you want. Will this fit my locomotive?The TSU-2200 is a universal hardwire decoder measuring 35 x 18 x 6mm, intended for HO and S scale diesels. It is not a drop-in board replacement. You wire it to the motor, pickups, lights and speaker. If your locomotive has a decoder plug, look at the TSU-PNP8 or TSU-21PNEM8 versions of the same sound set instead. Is a speaker included?No. The onboard amplifier is rated 2 watts into an 8-ohm load, so choose any 8-ohm speaker that fits your shell from our DCC speakers range. What does the 2-amp rating mean?It is the maximum motor stall current the decoder can handle. Two amps covers virtually every HO diesel, including twin-motor units. Smaller single-motor installs can also use the 1-amp TSU-1100 version. Do I need a CurrentKeeper?It is optional and well worth it. The 810140 CurrentKeeper is a capacitor pack that carries the decoder across dirty track, frogs and turnouts so the sound does not reset. This decoder has the quick-plug connector for it built in. Does it work on a DC layout?Yes. Tsunami2 runs on analog DC out of the box, though sound and lighting features are limited compared with DCC operation. Full function control needs a DCC system. How do I select a different prime mover?Each engine in the coverage table is chosen with a single CV setting, documented in the Tsunami2 diesel user guide included with the decoder. You can change it as often as you like, so one decoder can be re-tasked if you sell or re-motor the locomotive. Explore More Browse the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD-2 sound profile decoders, including the 4-amp TSU-4400 for larger installs and the TSU-N18 for N scale. You will also need a speaker, so browse our DCC speakers, and most installs go easier with parts from DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts.

Read more less

Kit includes: 1 Warm White Stick-On LED 2 Warm White Nano LEDs Minimum 15" wire with Just Plug connector Miss Molly's Diner welcomes you with a spoonful of some good home cookin'. This N Scale Built-&-Ready® is styled like a train car eatery, hand-painted and authentically weathered for realism. It features a detached, classic sign, a menu board and other details for custom placement. The ready-made structure has an eye-catching printed interior complete with booths, a kitchen and other authentic diner features. This local establishment is open for business on your layout right of the package. Bring the diner to life with both interior and exterior pre-installed LED lighting made for use with the Just Plug® Lighting System. 30mA RoHS Compliant Pair this building with Just Plug Spotlights to highlight details like the detached, classic sign.

Read more less

Static Grass 42 grams Grass length: 3mm

Read more less

Static Grass 28 grams Grass length: 12mmm

Read more less

Enhance the realism of your model landscapes with Woodland Scenics 624 Static Grass Straw. The 7mm strands add texture and depth to your creations. Made with high-quality materials, this product is perfect for creating lifelike grassy areas. Bring your models to life with this expertly crafted and scientifically designed product. Static Grass 42 grams Grass length: 7mm

Read more less

Static Grass 70 grams Grass length: 2mm

Read more less

It's a three-alarm fire, but your layout residents are sure to receive a quick response from firefighters answering the call. Building details include hinged doors that you can open or close, a fire escape ladder, drainage, an electrical box, conduit and more! Exquisite and ornate architectural details highlight this Italianate styled Firehouse. See photos for footprint. This structure comes with pre-installed LED lighting made for use with the Just Plug® Lighting System. 25mA RoHS Compliant Colors may vary from actual product. More Information Item # BR4934 Brand Woodland Scenics Scale N Type Assembled Building Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New

Read more less

Static Grass 28 grams Grass length: 12mmm

Read more less

Static Grass 42 grams Grass length: 7mm

Read more less

The Digitrax DH127D is a Series 7 mobile decoder for HO scale, supplied with a bare 9-pin harness socket rather than a plug. That makes it the one to reach for on hard-wired installs and older locomotives with no DCC socket: you pick the harness that suits the job, or solder directly. One amp continuous with two amps peak handles any normal HO motor. Building a DCC fleet? Browse our DCC Decoders, DCC Speakers, and DCC Accessories. Features 1.0 amp continuous, 2.0 amps peak - ample for single-motor HO diesels and steam. Digitrax 9-pin harness socket so you choose the harness: add a DHWHPS or DHWH to suit the locomotive, or hard-wire it. 2 FX7 function outputs at 200mA for directional headlights plus effects like Mars light, ditch lights, rotary beacon and flicker. Series 7 platform with back-EMF speed stabilisation for slow, steady switching moves. Programs on any NMRA DCC system and runs on any DCC layout - a Digitrax command station is not required. More Information Brand Digitrax Item Number DH127D Product Type DCC Mobile Decoder Scale HO Motor Current 1.0 A continuous / 2.0 A peak Function Outputs 2 x FX7, 200 mA Connection 9-pin harness socket (no harness fitted) Series Digitrax Series 7 Sound No - motor and function decoder only Condition New FAQ What is the difference between the DH127D, DH127P and DH127PS?Only the harness. The DH127D has a bare 9-pin socket and no harness. The DH127P adds a medium 8-pin plug on about 3.2 in. of wire, and the DH127PS has the same plug on about 1.2 in. of wire for tight installs. The decoder itself is identical. Will it fit my locomotive?It suits hard-wired installs and any HO locomotive where you supply the harness. If your loco has an 8-pin NMRA DCC-ready socket, the DH127P or DH127PS is the easier choice because the plug is already fitted. Does it have sound?No. The DH127D is a motor and function decoder. For sound in HO, look at a Digitrax SDXH series decoder or a SoundTraxx unit, plus a speaker. Do I need a Digitrax command station to use it?No. It is a standard NMRA DCC decoder and will run and program on any DCC system.

Read more less