Coupons

Static Grass 28 grams Grass length: 12mmm

Read more less

Static Grass 42 grams Grass length: 7mm

Read more less

The Digitrax DH127D is a Series 7 mobile decoder for HO scale, supplied with a bare 9-pin harness socket rather than a plug. That makes it the one to reach for on hard-wired installs and older locomotives with no DCC socket: you pick the harness that suits the job, or solder directly. One amp continuous with two amps peak handles any normal HO motor. Building a DCC fleet? Browse our DCC Decoders, DCC Speakers, and DCC Accessories. Features 1.0 amp continuous, 2.0 amps peak - ample for single-motor HO diesels and steam. Digitrax 9-pin harness socket so you choose the harness: add a DHWHPS or DHWH to suit the locomotive, or hard-wire it. 2 FX7 function outputs at 200mA for directional headlights plus effects like Mars light, ditch lights, rotary beacon and flicker. Series 7 platform with back-EMF speed stabilisation for slow, steady switching moves. Programs on any NMRA DCC system and runs on any DCC layout - a Digitrax command station is not required. More Information Brand Digitrax Item Number DH127D Product Type DCC Mobile Decoder Scale HO Motor Current 1.0 A continuous / 2.0 A peak Function Outputs 2 x FX7, 200 mA Connection 9-pin harness socket (no harness fitted) Series Digitrax Series 7 Sound No - motor and function decoder only Condition New FAQ What is the difference between the DH127D, DH127P and DH127PS?Only the harness. The DH127D has a bare 9-pin socket and no harness. The DH127P adds a medium 8-pin plug on about 3.2 in. of wire, and the DH127PS has the same plug on about 1.2 in. of wire for tight installs. The decoder itself is identical. Will it fit my locomotive?It suits hard-wired installs and any HO locomotive where you supply the harness. If your loco has an 8-pin NMRA DCC-ready socket, the DH127P or DH127PS is the easier choice because the plug is already fitted. Does it have sound?No. The DH127D is a motor and function decoder. For sound in HO, look at a Digitrax SDXH series decoder or a SoundTraxx unit, plus a speaker. Do I need a Digitrax command station to use it?No. It is a standard NMRA DCC decoder and will run and program on any DCC system.

Read more less

Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC “quick plug” equipped model. This adapter can also be used with SoundTraxx 9-Pin JST power harness (STX810069) to create a universal-style decoder. Dimensions: 22.5 x 16 x 7.5mm Support for up to 8 functions Solder Pads for CurrentKeeper, speaker connections and extra lights More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

Static Grass 28 grams Grass length: 12mmm

Read more less

The SoundTraxx 810155 is the Mini Cube 2 Oval Speaker/Baffle. SoundTraxx’s tiniest speaker comes with a properly proportioned speaker enclosure and provides remarkable volume for tiny models! Specifications Item Number: SoundTraxx 810155 Dimensions: 13 x 9 x 9.4mm(D) Frequency Response: 100Hz – 10kHz Power: 40mW (Nominal) 75mW (Peak) Impedance: 32 Ohms Install note: When using this speaker with a decoder that has a 1-2 Watt, 8 Ohm amplifier; it must be wired in parallel with another 32 Ohm speaker to create a 16 Ohm load for the amplifier. More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

You haven't heard WOWSound until you've heard it through the 28 mm High-Bass 4 W WOWSpeaker. It handles an unprecedented 4 watts and uses a bass-reflex chamber to pack a big low-end punch — the new standard for sound in larger HO, O, and G-scale models. Pair it with a sound decoder from our DCC Decoders collection, browse more DCC Accessories, or shop the full Train Control Systems lineup. Features Handles a big 4 W of power with a bass-reflex chamber for deep, room-filling sound. 28 mm (1.1") round driver — ideal for larger HO, O, and G-scale installs. 8 Ω WOWSpeaker — works with TCS WOWSound and most other-brand DCC sound decoders. Works with any scale that has room to mount it. More Information Brand Train Control Systems (TCS) Item Number 1694 Type WOWSpeaker (DCC sound speaker) Size 28 mm (1.1") round Power 4 W Impedance 8 Ω Condition New FAQ What decoders does this work with?It's an 8 Ω speaker that works with TCS WOWSound decoders and virtually any other DCC sound decoder rated for an 8-ohm load. Do I need an enclosure or baffle?Yes. Speakers need a sealed enclosure or baffle (or a sealed cavity in the shell) to move air and produce full sound — mounting it in open air will sound thin. What scales can use it?Any scale with enough room to mount it. Smaller drivers suit N and HO; larger round and high-bass speakers shine in HO, O, and G.

Read more less

The SoundTraxx 885005 is a TSU-2200 Tsunami2 digital sound decoder with the EMD sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the universal-style decoder that fits most HO diesels, rated 2A and suited to HO to S scale. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 9 EMD prime movers: EMD 567 No Transition, EMD 567 Non-Turbo, EMD 567 Turbo, EMD Dual 567, EMD 645 Non-Turbo, EMD 645 Turbo, EMD Dual 645 Turbo, EMD 710 Turbo, EMD 710 G3C-T2 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885005 Model: TSU-2200 Tsunami2 Sound Set: EMD Diesel Scale: HO to S scale Decoder Size: 35 x 18 x 6mm Connection: Universal-style hardwire with an NMRA 9-pin JST harness Max. Motor Stall Current: 2A Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 35 x 18 x 6mm and connects by universal-style hardwire with an nmra 9-pin jst harness. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD or EMD-2 — which do I want?This is the EMD set: the common 567, 645 and 710 prime movers. The separate EMD-2 set carries a second group of less-common variants called out by cylinder count. Match the list above to your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

This little pickup still has a few thousand miles left and is up for anything. Just Plug® Vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layout's traffic has never looked so realistic. Add a Vehicle to a Just Plug Light Hub for easy installation. Just Plug and you're done! 20mA per Vehicle RoHS Compliant

Read more less

Brand: JT's Mega Steam Scent: Nada (unscented) Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

Water Ripples goes on clear and dries clear to create ripples. Customize your water colors by adding Water Tints or create whitecaps and foamy water with White Water Highlight™.

Read more less