DCC Accessories

The SoundTraxx 810135 is the 9-pin JST to NMRA 8-pin Wiring Harness. The SoundTraxx 9-pin JST to NMRA 8-pin wiring harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket. More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The Digitrax UP7 LocoNet Universal Panel is the fascia-mounted plug-in point that turns a LocoNet layout into a true walkaround railroad. Mount one every few feet along the fascia and operators can plug in a throttle, walk with their train, and unplug at the far end without ever dropping the session. Two front throttle jacks, three more LocoNet jacks for daisy-chaining, optional throttle charging, and a Track Status LED make the UP7 the modern drop-in replacement for the long-running Digitrax UP5 panel. Looking for more DCC gear? Browse our DCC Accessories, DCC Wiring, and DCC Decoders. Features Two front-panel RJ12 throttle jacks so operators can plug in, unplug, and walk the layout without ever interrupting the LocoNet session. Three more RJ12 LocoNet jacks (two rear, one side) make daisy-chaining panels and routing LocoNet cable around the layout straightforward. Optional throttle charging for DT602 and UT6 throttles, with power sharing across up to six UP7 panels so batteries stay topped off between operating sessions. Track Status LED gives an at-a-glance check that the section is powered, which makes troubleshooting far quicker. Plug-and-play installation - fully connectorized, no soldering required. Cut a 2.6 x 1.7 inch fascia opening, fasten with four #6 screws, and plug it in. Direct replacement for the Digitrax UP5 with the same LocoNet compatibility and an updated design. Scale: All Scales (Z through G) - works with any LocoNet-equipped Digitrax command station. More Information Brand Digitrax Item Number UP7 Product Type LocoNet Universal Panel (DCC Fascia Panel) Scale All Scales (Z, N, HO, O, G) Front Throttle Jacks 2 x RJ12 Additional LocoNet Jacks 3 x RJ12 (2 rear, 1 side) for daisy-chaining Throttle Charging Optional - DT602 and UT6, requires external 12V DC supply Track Status LED Yes, bi-color Power Input 2mm jack, 12V DC (Digitrax PS14 recommended) Cable Type 6-conductor flat cable with RJ12 6-pin connectors Fascia Cutout Approx. 2.6 in. W x 1.7 in. H, four #6 screws Replaces Digitrax UP5 Condition New UPC 625667110123 FAQ Will the UP7 work with my Digitrax system?Yes. Any Digitrax command station or booster with a LocoNet port works, including the Zephyr Express, DCS210+, DCS240+ and older LocoNet systems. Plug it in with standard LocoNet cable and it is ready to use. Do I need a power supply for it?Not for normal operation - LocoNet runs the panel on its own. Add a 12V DC supply such as the Digitrax PS14 only if you want the panel to charge DT602 or UT6 throttles while LocoNet is asleep. Can I use the UP7 to replace a UP5?Yes. The UP7 is the direct successor to the UP5 with the same LocoNet function, so it is the normal upgrade path for existing panels. How many panels does a layout need?Most operators mount one every 6 to 10 feet of fascia so a throttle jack is never more than a few steps away as you follow your train. What cable does it use?Standard 6-conductor flat LocoNet cable with RJ12 6-pin connectors - the same cable used throughout a Digitrax LocoNet layout.

Read more less

Power your Digitrax accessories with the reliable and efficient Digitrax PS14 AC/DC Adapter. Designed to provide a stable power supply, the PS14 is perfect for a wide range of Digitrax products, ensuring your model train setup runs smoothly and efficiently. Key Features: Versatile Power Supply: The PS14 provides 14V DC at 300ma, making it suitable for powering various Digitrax accessories such as the UP5, BDL168, DS64, SE8C, LNRP, UR90, UR91, UR92, and more. Universal AC Input: With an input range of 95-240V AC at 50/60Hz, the PS14 can be used worldwide, making it a versatile choice for model train enthusiasts everywhere. Compact and Lightweight: Weighing only 2 ounces, the PS14 is easy to handle and install. Its compact design ensures it fits neatly on a plug strip without taking up too much space. Stabilized Output: The PS14 provides a stabilized output, ensuring consistent performance and protecting your accessories from power fluctuations. Convenient Cable Length: The approximately 4-foot long cable offers flexibility in placement, allowing you to position your accessories exactly where you need them. Right Angle Connector: The 2.1 mm center positive connector is designed with a right angle, making it easy to connect in tight spaces. Power Indicator: A red LED power indicator lets you know when the adapter is on and functioning correctly. Why Choose the Digitrax PS14? The Digitrax PS14 is not just an adapter; it’s a reliable power solution for your model train accessories. Whether you’re a hobbyist looking to enhance your setup or a professional seeking dependable components, the PS14 offers the perfect balance of performance, versatility, and ease of use. Applications: Model Train Accessories: Ideal for powering a variety of Digitrax accessories, ensuring your model train layout operates smoothly. DIY Projects: Suitable for various DIY electronics projects that require a stable 14V DC power supply. Custom Installations: Perfect for custom model train installations where reliable power is essential. Specifications: Output Voltage: 14V DC Current Rating: 300ma Input Voltage: 95-240V AC, 50/60Hz Connector: 2.1 mm center positive, right angle Cable Length: Approximately 4 feet Weight: 2 ounces Enhance Your Model Train Experience Upgrade your model train setup with the Digitrax PS14 AC/DC Adapter. Its reliable performance, versatile compatibility, and user-friendly design make it the perfect choice for anyone looking to power their Digitrax accessories efficiently. More Information Item # PS14 Brand Digitrax MSRP $16.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet

Read more less

Increase your mobility with the Digitrax BP600MH battery pack for DT602 Series Throttles. Featuring a long-lasting rechargeable battery, this pack allows you to control your train layout without being tethered to an outlet. Say goodbye to cords and hello to convenience with the Digitrax BP600MH. Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works with DT602 Family of throttles. More Information Item # BP600MH Brand Digitrax Scale N/A MSRP $13.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

Efficiently manage and detect occupancy and transponding in 4 sub-districts with Digitrax PM74. This power manager is perfect for multiple scales and ensures a smooth and reliable operation. Trust in its advanced capabilities for a seamless experience. 4 Power Manager sub-districts. Upgraded replacement for PM42, fully encased. Fully connectorized installation. Each Power sub-district / Detection Section (DS) supports Auto-reverse or Short circuit management. Each DS supports Occupancy detection. Each DS supports Transponding detection. Allows Mainline CV Read/Write program of compatible decoders. Remote LED status support. Series7 style advanced installation support using DT602. Replaces PM42 Quad Power Manager. More Information Item # PM74 Brand Digitrax Scale Multi Scale MSRP $109.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax SDCK is the cable kit that gets signal connections from a signal decoder out to the masts without a rat's nest under the layout. You get 30 feet of 10-wire ribbon cable and eight 10-pin sockets - enough to build two complete signal driver cables - and you cut them to whatever length your benchwork actually needs, crimping a socket on wherever a signal goes. Signalling your layout? Browse our DCC Accessories, DCC Wiring, and the full Digitrax range. Features 30 ft of 10-wire signal driver ribbon cable plus eight 10-pin sockets - enough for two complete signal driver cables. Cut to your own lengths. Rather than buying fixed-length cables, you make each run the length the layout needs and put a socket exactly where the signal stands. Keeps the wiring tidy. All the signal connections travel together in one ribbon instead of a bundle of loose wires under the benchwork. Connects signal decoders to signal masts - the standard cabling method for Digitrax signal decoder installs. Works in any scale; the cable and sockets are the same regardless of the signal heads you are feeding. More Information Brand Digitrax Item Number SDCK Product Type Signal Driver Cable Kit Scale All scales Cable 30 ft, 10-conductor ribbon Sockets 8 x 10-pin Makes 2 complete signal driver cables Use With Digitrax signal decoders and signal mast bases Condition New FAQ What exactly is in the box?Thirty feet of 10-wire ribbon cable and eight 10-pin sockets. That is the raw material for two full signal driver cables, cut and terminated wherever your layout needs them. Do I need any special tools?The sockets are insulation-displacement type, so they press onto the ribbon cable. A small vice or a pair of smooth-jaw pliers will seat them; no soldering and no crimp tool needed. What else do I need for a signal install?A signal decoder to drive the aspects, signal masts or heads, and mounting hardware such as the SMBK mast base kit and SMHK mounting hardware kit to hold the plugs at the right height under the layout. Can I make the cables any length?Yes, that is the point of buying a kit rather than ready-made cables. Measure the run, cut, and press a socket on at each signal position.

Read more less

As an industry leader in model train control, the Digitrax DB220 offers a powerful and versatile option for your layout. With dual 3/5/8 amp auto-reversing capability and compatibility across multiple scales, this booster provides reliable and efficient power distribution for your DCC system. Dual 3/5/8 Amp AutoReversing DCC Booster Up to 16 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over temperature and short circuit protection Track status indicators Stabilized track drive output Over-voltage protected Auto-Shutdown when command control signal is lost to prevent “runaway” trains IPL updatable More Information Item # DB220 Brand Digitrax Scale Multi Scale MSRP $240.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less

This Digitrax STAW Stow Away Throttle Holder is the perfect solution for storing and organizing your throttle controls. With its compact design and easy installation, it allows for efficient use of space and quick access to your throttles. Keep your workspace clutter-free and your throttles within reach with this 1 pack stow away holder. Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day Warranty On Materials & Workmanship Only. More Information Item # STAW Brand Digitrax Warranty No Worries Warranty (read more) MSRP $14.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The new ESU PowerPack Mini can be wired to all fourth and fifth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (1 Farad capacity) the unit supplies power to all light and motor functions as well as to the sound module. Subject to the energy consumption of your model it may continue to move for up to three seconds. The PowerPack Mini incorporates an integral charging circuit controlled by the decoder. Therefore it may be connected even during programming. In order to avoid an undue load on the booster in case there are several models in the same booster sector, the charging current is limited. The buffer time can be reduced by means of a CV. This may be useful to assure the correct stopping position ahead of signals showing the “Stop” aspect (red signal). Although it is considerably smaller than its predecessor, the space requirements of the PowerPack Mini of about 15.7 mm x 9.7 mm x 13 mm must be taken into account when installing this unit. A three-pole wire harness connects the PowerPack Mini to the decoder. The wires are already soldered to the PowerPack Mini and must be soldered to the appropriate solder pads of the decoder. More Information Item # 54671 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Digitrax LNCCMC1 Coiled Cord & RJ12 Modular Adapter makes it easy to add a coiled cord to your LocoNet throttle without soldering. Designed for use with all Digitrax throttles, this convenient adapter plugs directly into your existing throttle plug and adds a flexible coiled cord for improved usability and layout comfort. Adds a coiled cord to your LocoNet throttle No soldering required Includes RJ12 modular adapter Compatible with all Digitrax throttles Ideal for upgrading straight cord throttles More Information Brand Digitrax Model Number LNCCMC1 Product Type LocoNet Accessory Compatibility All Digitrax Throttles MSRP $18.00 Warranty 90 Day Limited Warranty HS Code 9503.00.00 Frequently Asked Questions Does this require soldering?No. The LNCCMC1 plugs directly into your existing throttle connection using the included modular adapter. Will this work with older Digitrax throttles?Yes. It is compatible with all Digitrax LocoNet throttles. What does this improve?It replaces or adds a coiled cord for better flexibility and strain relief compared to straight cords.

Read more less

The new ESU PowerPack Maxi has been developed as the powerful complement to the LokSound L V4.0 /  LokSound  5 L decoder. It can, of course, provided there is sufficient space, also be connected to all LokPilot V4.0, LokSound V4.0, LokSound V4.0 M4, LokPilot 5 or LokSound 5 decoders. It provides uninterrupted power to your locomotive when traversing dirty track and long turnout ladders. All sound, lighting and motor functions are buffered with the aid of two energy storage capacitors enabling your models – subject to the total energy consumption - to continue running for up to three seconds. The PowerPack Maxi incorporates an integral charging circuit controlled by the decoder. Therefore it may be connected even during programming. The charging current is limited in order to avoid an undue load on the booster, in case there are several models in the same booster sector. The buffer time can be reduced by means of a CV. This may be useful to assure the correct stopping position ahead of signals showing the “Stop” aspect (red signal). The space requirements of the PowerPack Maxi of about 27.5 mm x 15.7 mm x 13 mm must be taken into account when installing this unit. A three-pole wire harness connects the PowerPack Maxi to the decoder. The wires are already soldered to the PowerPack Maxi but must be soldered to the appropriate solder pads of the decoder. Please note that due to technical reasons the PowerPack cannot operate in analogue mode: Buffering is therefore not possible in analogue mode. More Information Item # 54672 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Throttles get put down on the layout, on the scenery, or on the floor. The Digitrax STAW4 is a four-pack of fascia-mounted brackets that give every throttle somewhere to live - stowed, out of the way, and still plugged into LocoNet so it keeps charging between sessions. More LocoNet gear? Browse our DCC Accessories, DCC Wiring, and the full Digitrax range. Features Four brackets per pack - enough to give each operating position its own throttle station. Holds DT602, UT6 and other legacy Digitrax throttles, so it works across a mixed throttle fleet. LocoNet and power ports stay accessible while stowed, which means the throttle can charge in its bracket rather than on a shelf somewhere. Fascia mounted and easy to install - a few screws at each operating position. Durable construction, built to survive being grabbed at during an operating session. More Information Brand Digitrax Item Number STAW4 Product Type Throttle Holder Scale All scales Quantity 4 brackets Fits DT602, UT6 and other legacy Digitrax throttles Mounting Fascia Ports LocoNet and power accessible when stowed Warranty 90 day, materials and workmanship Condition New FAQ Will it hold my throttle?It is designed around the DT602 and UT6, and also holds other legacy Digitrax throttles. If you run a mixed fleet from different eras, check the older ones against the bracket before buying a set for the whole layout. Can the throttle charge while it is in the bracket?Yes - the LocoNet and power ports stay accessible when stowed, so a throttle left in its holder can keep charging between sessions. Where should I mount them?One at each operating position, at a height where an operator can drop a throttle in without looking. Near a universal panel is the usual choice so the cable run is short. How do they attach?They are fascia mounted with screws. Pick a spot on the fascia clear of the layout edge so a stowed throttle is not in the way of anyone leaning in.

Read more less