DCC Decoders

The SoundTraxx 885610 is a BLU-21PNEM8 Blunami digital sound decoder with the GE sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is the 21-pin MTC plug-in Blunami, suited to HO scale and larger. Features 8 GE prime movers: GE FDL-12, GE FDL-16, GE 7FDL-16, GE Dual FDL-16, GE GEVO G12, GE 44-Ton Center Cab Dual Caterpillar, GE Cummins Switcher, GEVO G12 Tier 4 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885610 Model: BLU-21PNEM8 Blunami Sound Set: GE Diesel Scale: HO scale and larger Decoder Size: 30.5 x 15.5 x 6.5mm Connection: NEM660 21MTC integral connector Max. Motor Stall Current: 1A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other GE sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Will it fit my locomotive?This one measures 30.5 x 15.5 x 6.5mm and connects by nem660 21mtc integral connector. Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.

Read more less

The SoundTraxx 884007 is a TSU-2200 Tsunami2 digital sound decoder with the Steam-2 sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the universal-style decoder that fits most HO diesels, rated 2A and suited to HO to S scale. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 90 selectable whistles — 27 more than the standard Steam set — plus 10 exhaust chuffs, 12 bells, 10 airpumps and 8 dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 884007 Model: TSU-2200 Tsunami2 Sound Set: Steam-2 Steam Scale: HO to S scale Decoder Size: 35 x 18 x 6mm Connection: Universal-style hardwire with an NMRA 9-pin JST harness Max. Motor Stall Current: 2A Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Steam-2 sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 35 x 18 x 6mm and connects by universal-style hardwire with an nmra 9-pin jst harness. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. How is Steam-2 different from the standard Steam set?The chuffs, bells, airpumps and dynamos are the same. The difference is the whistle library: Steam-2 offers 90 whistles against 63 on the standard Steam set, with many roadname-specific additions. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 882006 is an ECO-21PNEM Diesel digital sound decoder. Econami is SoundTraxx’s value line: the same 16-bit sound and Hyperdrive2 motor control as Tsunami2, with a smaller sound library and a lower price. It carries 12 polyphonic sound channels and over 20 Hyperlight lighting effects. It is a full NMRA-compliant DCC decoder rated 1A, connecting by 21-pin dual-row bottom-entry nem connector. Features 5 diesel prime movers: EMD 567 non-turbo, EMD 645 turbo, EMD 710 turbo, GE FDL-16 and ALCO 244 16 air horns (Nathan, Wabco, Holden and Leslie), 7 bells and 2 air compressors Dynamic braking on F4, plus independent and train brakes Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16-bit sound on 12 polyphonic channels, with a 7-band equalizer 28 functions, Flex-Map function remapping and switching mode CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 882006 Model: ECO-21PNEM Diesel Sound Set: Econami Diesel Decoder Size: 30.5 x 15.5mm Connection: 21-pin dual-row bottom-entry NEM connector Max. Motor Stall Current: 1A Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 12 polyphonic Sound Resolution: 16-bit Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the EMD / EMD-2 Diesel decoders. A speaker is not included — browse DCC speakers rated 2 watt, 8-ohm or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track. FAQ How is Econami different from Tsunami2?Both are 16-bit with Hyperdrive2 motor control, 28 functions and 20+ lighting effects. Econami has a smaller sound library (5 prime movers, 16 air horns and 7 bells against Tsunami2’s 12, 40+ and 14), 12 sound channels instead of 16, and no reverb. If your prototype is covered by the list above, Econami saves you real money. Is a speaker included?No. Pair it with any 8-ohm speaker rated 2 watt or better that fits your shell. Does it have Dynamic Digital Exhaust?No. DDE is on the Econami steam decoders and across the Tsunami2 line, but not on Econami diesel. You do get dynamic braking on F4. Will it fit my locomotive?It measures 30.5 x 15.5mm and connects by 21-pin dual-row bottom-entry nem connector. Check that against the space in your shell before ordering.

Read more less

The SoundTraxx 852005 is the MC1H104P21 DCC mobile decoder — a motor and lighting decoder without sound, for HO scale locomotives. It is rated 1 amp and connects by 21-pin nmra connector, plugs into the factory pcb. As an MC1 series decoder it operates on DCC only — it needs a command station and will not run on a plain DC power pack. Motor control is SoundTraxx Hyperdrive. Features DCC operation — requires a DCC command station 14 Hyperlight lighting effects across 4 function outputs — Mars Light, Pyle National Gyralite, single and dual strobes, Western-Cullen D312 rotary beacon, Prime Stratolite, Type I and II ditch lights with grade-crossing logic, dimmable headlight, Dyno-Light and FRED Rule 17 or directional lighting control, grade-crossing timers, adjustable flash rate and LED brightness correction Hyperdrive motor control for smooth low-speed running NMRA DCC compliant, made in Durango, Colorado More Information Item Number: SoundTraxx 852005 Model: MC1H104P21 Type: Mobile decoder — motor and lighting, no sound Scale: HO scale Decoder Size: 25.1 x 15.6 x 4.7mm Connection: 21-pin NMRA connector, plugs into the factory PCB Max. Motor Stall Current: 1A Function Outputs: 4 (100mA each) Operating Modes: DCC only Max. Track Voltage: 21V max Motor Control: Hyperdrive Shop the full SoundTraxx range, compare every DCC decoder we stock, or find install parts in DCC wiring. Want engine sound as well? Look at the sound decoders instead — this one is motor and lights only. FAQ Does this make engine sound?No. Mobile decoders drive the motor and lights only. For sound, choose a Tsunami2, Blunami or Econami sound decoder. Will it run on my DC power pack?No. This is an MC1 series decoder and is DCC only — it needs a command station. If you need DC too, choose an MC2 series decoder such as the 852002 or 852003. What does the model number mean?MC1H104P21 breaks down as: MC1 series (DCC only), H for HO scale, 1 amp, 04 function outputs, and the connector type. Will it fit my locomotive?It measures 25.1 x 15.6 x 4.7mm and connects by 21-pin nmra connector, plugs into the factory pcb. Check that against your locomotive before ordering — the other MC decoders use different connectors and sizes.

Read more less

The SoundTraxx 885813 is a TSU-PNP8 Tsunami2 digital sound decoder with the EMD sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a drop-in replacement for the factory board in many HO diesels, rated 2A and suited to HO to S scale. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 9 EMD prime movers: EMD 567 No Transition, EMD 567 Non-Turbo, EMD 567 Turbo, EMD Dual 567, EMD 645 Non-Turbo, EMD 645 Turbo, EMD Dual 645 Turbo, EMD 710 Turbo, EMD 710 G3C-T2 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885813 Model: TSU-PNP8 Tsunami2 Sound Set: EMD Diesel Scale: HO to S scale Decoder Size: 74 x 17 x 5mm Connection: Drop-in factory board replacement Max. Motor Stall Current: 2A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 74 x 17 x 5mm and connects by a drop-in factory board replacement. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD or EMD-2 — which do I want?This is the EMD set: the common 567, 645 and 710 prime movers. The separate EMD-2 set carries a second group of less-common variants called out by cylinder count. Match the list above to your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 884006 is a TSU-1100 Tsunami2 digital sound decoder with the Steam-2 sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a compact universal-style decoder for tight installs, rated 1A and suited to small models with minimal space. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 90 selectable whistles — 27 more than the standard Steam set — plus 10 exhaust chuffs, 12 bells, 10 airpumps and 8 dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 884006 Model: TSU-1100 Tsunami2 Sound Set: Steam-2 Steam Scale: small models with minimal space Decoder Size: 27 x 10.5 x 5mm Connection: Universal-style hardwire Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Steam-2 sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 27 x 10.5 x 5mm and connects by universal-style hardwire. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. How is Steam-2 different from the standard Steam set?The chuffs, bells, airpumps and dynamos are the same. The difference is the whistle library: Steam-2 offers 90 whistles against 63 on the standard Steam set, with many roadname-specific additions. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 852002 is the MC2H104AT DCC mobile decoder — a motor and lighting decoder without sound, for HO scale locomotives. It is rated 1 amp and connects by atlas light-board replacement (also fits some intermountain models). As an MC2 series decoder it runs on both DC and DCC, so it will work on a plain power pack as well as a command station, and it supports optional three-point speed curves via CVs 5 and 6. Motor control is SoundTraxx Hyperdrive. Features Runs on DC and DCC — a power pack or a command station 14 Hyperlight lighting effects across 4 function outputs — Mars Light, Pyle National Gyralite, single and dual strobes, Western-Cullen D312 rotary beacon, Prime Stratolite, Type I and II ditch lights with grade-crossing logic, dimmable headlight, Dyno-Light and FRED Rule 17 or directional lighting control, grade-crossing timers, adjustable flash rate and LED brightness correction Hyperdrive motor control for smooth low-speed running Three-point speed curves via CVs 5 and 6 NMRA DCC compliant, made in Durango, Colorado More Information Item Number: SoundTraxx 852002 Model: MC2H104AT Type: Mobile decoder — motor and lighting, no sound Scale: HO scale Decoder Size: 74 x 17 x 3mm Connection: Atlas light-board replacement (also fits some InterMountain models) Max. Motor Stall Current: 1A Function Outputs: 4 (100mA each) Operating Modes: DC and DCC Max. Track Voltage: 22V Motor Control: Hyperdrive Shop the full SoundTraxx range, compare every DCC decoder we stock, or find install parts in DCC wiring. Want engine sound as well? Look at the sound decoders instead — this one is motor and lights only. FAQ Does this make engine sound?No. Mobile decoders drive the motor and lights only. For sound, choose a Tsunami2, Blunami or Econami sound decoder. Will it run on my DC power pack?Yes. MC2 series decoders run on both DC and DCC. What does the model number mean?MC2H104AT breaks down as: MC2 series (DC and DCC), H for HO scale, 1 amp, 04 function outputs, and the connector type. Will it fit my locomotive?It measures 74 x 17 x 3mm and connects by atlas light-board replacement (also fits some intermountain models). Check that against your locomotive before ordering — the other MC decoders use different connectors and sizes.

Read more less

The SoundTraxx 885809 is a TSU-21PNEM8 Tsunami2 digital sound decoder with the EMD sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the 21-pin MTC plug-in decoder, rated 1A and suited to HO scale and larger. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 9 EMD prime movers: EMD 567 No Transition, EMD 567 Non-Turbo, EMD 567 Turbo, EMD Dual 567, EMD 645 Non-Turbo, EMD 645 Turbo, EMD Dual 645 Turbo, EMD 710 Turbo, EMD 710 G3C-T2 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885809 Model: TSU-21PNEM8 Tsunami2 Sound Set: EMD Diesel Scale: HO scale and larger Decoder Size: 30.5 x 15.5 x 6.5mm Connection: 21-pin NEM (21MTC) plug Max. Motor Stall Current: 1A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 30.5 x 15.5 x 6.5mm and connects by 21-pin nem (21mtc) plug. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD or EMD-2 — which do I want?This is the EMD set: the common 567, 645 and 710 prime movers. The separate EMD-2 set carries a second group of less-common variants called out by cylinder count. Match the list above to your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The Digitrax SDH167D is a powerful and versatile sound decoder designed for HO scale model trains. With advanced features such as Series 7 sound technology, this decoder delivers high-quality sound effects and enhances your model railroad experience. Easy to install and compatible with most DCC systems. 2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm 16 x 26 x 9mm Box Speaker 300uF Capacitor More Information Item # SDH167D Brand Digitrax Scale HO Scale MSRP 49.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less