Enhance your HO railroad with the Walthers Cornerstone 933-4108 Modern Furniture Factory kit. This detailed structure is ideal for both standalone or integrated industrial layouts, and includes: - Contemporary design adaptable to various industries - Typical steel construction from the 1970s to the present - Two-story main building with front office, truck, and rail car loading/unloading areas - Separate lumber storage building with interior racks - Large dust/sawdust collector - Parts to build detailed electrical transformer, vents, and four rooftop air conditioners - Separate doors and windows - Molded in Light Ivory, Concrete, Medium Gray, and Light Gray, with clear acetate Dimensions: - Main Building: 15-3/8 x 10-1/2 x 4-1/2" (39 x 26.9 x 11.3cm) - Lumber Storage Shed: 9-3/4 x 4-1/2 x 2-3/4" (24.6 x 11.4 x 6.9cm) - Dust Collector: 1-5/8 x 1-5/8 x 5-3/16" (4.1 x 4.1 x 13.1cm)

Read more less

Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability) Up to 8 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over temperature and short circuit protection Track status indicators Stabilized track drive output Over-voltage protected Auto-Shutdown when command control signal is lost to prevent “runaway” trains IPL updatable More Information Item # DB210 Brand Digitrax Scale Multi Scale MSRP 159.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less

PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell

Read more less

PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell

Read more less

WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell

Read more less

WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell

Read more less

Unlock the secrets of making a river and waterfall and create stunning illusions of depth with this amazing Learning Kit! Realistic Water™ allows for a river measuring 1" w x 28" l x 1/8" d (2.54 cm x 71.1 cm x 3.17 mm). And Water Effects® offers a waterfall measuring 1 1/4" w x 5" l x 3/32" d (3.17 cm x 12.7 cm x 2.38 mm)! Whether a novice or an experienced modeller, this set is the perfect learning tool to help craft your masterpiece! Realistic Water™ will model a river approximately 1 in w x 28 in l x 1/8 in d (2.54 cm x 71.1 cm x 3.17 mm). Water Effects® will model a waterfall approximately 1 1/4 in w x 5 in l x 3/32 in d (3.17 cm x 12.7 cm x 2.38 mm). About Learning Kits Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage. Hydrocal® is a registered trademark of U.S. Gypsum.

Read more less

Discover how simple it is to craft roadways and pavements for a layout. This Learning Kit comes with sufficient material for roads up to 3" x 4' (7.62 cm x 121 cm) - ideal for anyone, even you! About Learning Kits Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage. Hydrocal® is a registered trademark of U.S. Gypsum.

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

N Scale 5 Piece assortment Plastic resin bodies and frame. LED Light for Front and Rear Lighting Wired and Ready for Use A Great Value For best results use 15 to 19 Volt Power Supply

Read more less