In Stock

Water Ripples goes on clear and dries clear to create ripples. Customize your water colors by adding Water Tints or create whitecaps and foamy water with White Water Highlight™.

Read more less

The SoundTraxx 885032 is a TSU-KN1 Tsunami2 digital sound decoder with the Kato N sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the first plug-and-play Tsunami2 for Kato N-scale locomotives, supplied with a full install kit, rated 500mA and suited to N scale (Kato). Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 8 prime movers spanning EMD, GE and ALCO: EMD 567C 16-cylinder non-turbo, EMD Dual 567 (E-units), EMD 645E 12-cylinder turbo, EMD 645F 16-cylinder turbo, EMD 645E 20-cylinder turbo, EMD 645 Turbo 2nd generation, GE 7FDL-16, ALCO 244 Turbo Complete install kit included: decoder, Mini Cube 3 speaker and baffle, speaker wire, Kapton tape and two Sunny White LEDs 44 air horns and 14 bells, plus air compressors Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885032 Model: TSU-KN1 Tsunami2 Sound Set: Kato N Diesel (Kato N) Scale: N scale (Kato) Decoder Size: 55 x 13.8 x 3.2mm Connection: Plug-and-play board replacement for Kato N-scale locomotives Max. Motor Stall Current: 500mA Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker and baffle are included in the box. Find extra install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 55 x 13.8 x 3.2mm and connects by plug-and-play board replacement for kato n-scale locomotives. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Do I need to buy anything else?No. The TSU-KN1 ships as a complete kit — decoder, Mini Cube 3 speaker and baffle, speaker wire, Kapton tape and two Sunny White LEDs. It is designed for Kato N-scale E-units, F-units, F40PH, PA and P42 locomotives. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The Circuitron 800-6000 The Tortoise Switch Machine offers multi-scale compatibility and superior performance. With its reliable construction and precise movement, this switch machine is perfect for model train enthusiasts of all levels. Upgrade your layout with the trusted industry expertise of Circuitron. More Information Item # 800-6000 Brand Circuitron  Scale All Scales MSRP $24.95 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

The Walthers Cornerstone 3-Stall Modern Roundhouse will be a hallmark of later steam-era railroading on your HO layout. If you model the diesel era you'll also find this kit to be a centerpiece of your servicing facility since some of these classics are still used today for servicing diesels. No matter the weather, workers could easily inspect and service locos under cover. Size was based on the number of engines coming and going in any 24-hour period, with the busiest terminals requiring full-circle roundhouses. This detailed 3-Stall Modern Roundhouse model includes three stalls on 10-degree centers to make the most of your available space like the prototype. And with a modular design, you can add as many stalls as your railroad requires using the Modern Roundhouse Add-On Stalls (933-2901, sold separately). For more realism, interior and exterior brick wall details, fine windows, floor inspection pits and much more are all standard. Locos up to 125 scale feet long fit easily inside the 3-Stall Modern Roundhouse and parts for a single 145 foot long stall are also included as many modern roundhouses were expanded to handle large locos like Mallets. Authentic North American prototype Holds engines up to 125 scale feet long Includes stall for bigger engines up to 145 scale feet long Modular design - easily expanded to a full circle Compact 10-degree stall spacing Interior and exterior brick detail Fine window details Floor inspection pits Decal signs included As shown the Modern Roundhouse measures: Standard Building: 17-3/4 x 16 x 5-1/2" or 44.3 x 40 x 13.7cm With Extended Stall: 20-1/8" or 50.3cm Long Pit Depth: 5/16" or .78cm

Read more less

Add realistic entry lighting to any HO Scale structure with these easy-to-install Entry Wall Mount Lights from Woodland Scenics. Part of the Just Plug system, this set offers plug-and-play convenience and versatile mounting options for customizing the look of your layout. Includes 2 warm white wall-mount LED lights Designed for HO scale building exteriors Works with Just Plug Lighting System – no soldering required Ready to plug into Light Hub or Expansion Hub (sold separately) Wire length and positioning can be customized for your scene Perfect for houses, shops, stations, and more More Information Brand Woodland Scenics Lighting Type Just Plug LED System Scale HO Scale Model Entry Wall Mount Lights MSRP $13.99 Item # 5655 Made In United States Availability In Stock Browse more HO Scale Structures or shop all Woodland Scenics Products. Frequently Asked Questions Q: Do I need any tools to install these lights?A: No tools or soldering are needed—just plug into the Just Plug hub. Q: What voltage does the Just Plug system use?A: The system uses 12–16V DC with included resistors for safety. Q: Can I dim the lights?A: Yes, use the optional Just Plug Dimmer or Light Hub with controls. Q: Are these compatible with N Scale buildings?A: They're sized for HO Scale but may work with some N Scale scenes.

Read more less

The Walthers Cornerstone Turntable Control Box allows you to expand operations of your HO or N Scale Cornerstone Motorized Turntable up to four remote locations. This add-on control box is designed for use with the turntables as noted above. It can be used on layouts running on DC or DCC train control and provides simple operation and programming with programmable indexing for up to 99 different tracks, one-touch 180-degree bridge rotation in either direction and a simplified LED display with adjustable brightness. Allows adding additional Motorized Turntable control points Use on DC or DCC layouts Two-digit LED display Measures: 3" 7.6cm Square Inside 3-5/8" 9.2cm Square Exterior Allow 1" 2.5cm clearance; additional space may be required for cables. For advanced control using DCC, Arduino and similar advanced controllers please refer to the Cornerstone Turntable Advanced Control Module.Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately: HO Scale 90' 933-2860 HO Scale 110' 933-2851 HO Scale 130' 933-2859 N Scale 130' 933-2618

Read more less

The SoundTraxx 885613 is a BLU-PNP8 Blunami digital sound decoder with the EMD sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is a drop-in replacement for the factory AT-style board in many HO diesels, suited to HO to S scale. Features 9 EMD prime movers: EMD 567 No Transition, EMD 567 Non-Turbo, EMD 567 Turbo, EMD Dual 567, EMD 645 Non-Turbo, EMD 645 Turbo, EMD Dual 645 Turbo, EMD 710 Turbo, EMD 710 G3C-T2 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885613 Model: BLU-PNP8 Blunami Sound Set: EMD Diesel Scale: HO to S scale Decoder Size: 74 x 17 x 5mm Connection: Drop-in AT-style board replacement Max. Motor Stall Current: 2A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD or EMD-2 — which do I want?This is the EMD set: the common 567, 645 and 710 prime movers. The separate EMD-2 set carries a second group of less-common variants with specific cylinder counts. Check your locomotive’s prime mover against the list above before ordering. Will it fit my locomotive?This one measures 74 x 17 x 5mm and connects by drop-in at-style board replacement. Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.

Read more less

A great detail for contemporary operations, the versatile Modern Diesel Fueling Facility has everything you need to model today's fueling pads in HO. Check out the features of this detailed Cornerstone kit that includes: All-new model for contemporary layouts Great addition to yards and engine terminal scenes Typical of facilities used by large and small North American railroads Builds a typical 3-track fueling pad - easily adapted for longer 2-track model Includes six each: Large and small walkways Spill containment pans Fueling cranes Cooling water booms and cabinets Lube oil booms and cabinets Nonworking overhead lights Molded in two colors of plastic Measures: 10 x 20-5/8 x 4-3/8" (over lights) 25.4 x 52.3 x 11.1 cm; track spacing 3-3/16" 8cm Kit - 10 x 20-5/8 x 4-3/8" (over lights) or 25.4 x 52.3 x 11.1cm

Read more less

Add texture and highlights to scenery Blends naturally with other foliage For any scale 57.7 in3 (945 cm3)

Read more less

Code 83 HO Scale Nickel Silver Rail Snap-Track pieces in bulk (no packaging). Pricing is per single piece.

Read more less

Static Grass 70 grams Grass length: 2mm

Read more less

Harrison's Hardware carries everything to keep your home and workshop running in tip-top shape. There are dollies, trash cans, snow shovels, a dumpster, signs, shades and more! Harrison's Hardware includes an installed LED interior light and a printed interior. See photos for footprint. This structure comes with pre-installed LED lighting made for use with the Just Plug® Lighting System. 25mA RoHS Compliant Colors may vary from actual product. More Information Item # BR4921 Brand Woodland Scenics Scale N Type Assembled Building Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New

Read more less