In Stock

Use with Extension Wire to create custom lengths of Just Plug Cables. Reach Hubs anywhere on your layout or project.

Read more less

Whether you're sending a letter or patiently waiting on a package, Letters, Parcels & Post is there for all of your mailing needs. Includes a rugged stone foundation, plenty of windows for showing off the printed interior and a light for highlighting the flag. A covered porch provides a place to wait when the lines are long and a set of stairs lead to a side door. Additional features include a chimney, rear loading dock and an unattached mailbox for dropping off mail at any time of day. This structure comes with pre-installed LED lighting made for use with the Just Plug® Lighting System. 20mA RoHS Compliant Colors may vary from actual product. More Information Item # BR4953 Brand Woodland Scenics Scale N Type Assembled Building Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New

Read more less

The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For N Scale models Dimensions: 4" x 7 3/4"

Read more less

Ready to plug into a port on a Light Hub or Sequencing Light Hub. Use to plug in remotely located Street and Wall Mount Lights.

Read more less

The Digitrax UP7 LocoNet Universal Panel is the fascia-mounted plug-in point that turns a LocoNet layout into a true walkaround railroad. Mount one every few feet along the fascia and operators can plug in a throttle, walk with their train, and unplug at the far end without ever dropping the session. Two front throttle jacks, three more LocoNet jacks for daisy-chaining, optional throttle charging, and a Track Status LED make the UP7 the modern drop-in replacement for the long-running Digitrax UP5 panel. Looking for more DCC gear? Browse our DCC Accessories, DCC Wiring, and DCC Decoders. Features Two front-panel RJ12 throttle jacks so operators can plug in, unplug, and walk the layout without ever interrupting the LocoNet session. Three more RJ12 LocoNet jacks (two rear, one side) make daisy-chaining panels and routing LocoNet cable around the layout straightforward. Optional throttle charging for DT602 and UT6 throttles, with power sharing across up to six UP7 panels so batteries stay topped off between operating sessions. Track Status LED gives an at-a-glance check that the section is powered, which makes troubleshooting far quicker. Plug-and-play installation - fully connectorized, no soldering required. Cut a 2.6 x 1.7 inch fascia opening, fasten with four #6 screws, and plug it in. Direct replacement for the Digitrax UP5 with the same LocoNet compatibility and an updated design. Scale: All Scales (Z through G) - works with any LocoNet-equipped Digitrax command station. More Information Brand Digitrax Item Number UP7 Product Type LocoNet Universal Panel (DCC Fascia Panel) Scale All Scales (Z, N, HO, O, G) Front Throttle Jacks 2 x RJ12 Additional LocoNet Jacks 3 x RJ12 (2 rear, 1 side) for daisy-chaining Throttle Charging Optional - DT602 and UT6, requires external 12V DC supply Track Status LED Yes, bi-color Power Input 2mm jack, 12V DC (Digitrax PS14 recommended) Cable Type 6-conductor flat cable with RJ12 6-pin connectors Fascia Cutout Approx. 2.6 in. W x 1.7 in. H, four #6 screws Replaces Digitrax UP5 Condition New UPC 625667110123 FAQ Will the UP7 work with my Digitrax system?Yes. Any Digitrax command station or booster with a LocoNet port works, including the Zephyr Express, DCS210+, DCS240+ and older LocoNet systems. Plug it in with standard LocoNet cable and it is ready to use. Do I need a power supply for it?Not for normal operation - LocoNet runs the panel on its own. Add a 12V DC supply such as the Digitrax PS14 only if you want the panel to charge DT602 or UT6 throttles while LocoNet is asleep. Can I use the UP7 to replace a UP5?Yes. The UP7 is the direct successor to the UP5 with the same LocoNet function, so it is the normal upgrade path for existing panels. How many panels does a layout need?Most operators mount one every 6 to 10 feet of fascia so a throttle jack is never more than a few steps away as you follow your train. What cable does it use?Standard 6-conductor flat LocoNet cable with RJ12 6-pin connectors - the same cable used throughout a Digitrax LocoNet layout.

Read more less

The SoundTraxx 885610 is a BLU-21PNEM8 Blunami digital sound decoder with the GE sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is the 21-pin MTC plug-in Blunami, suited to HO scale and larger. Features 8 GE prime movers: GE FDL-12, GE FDL-16, GE 7FDL-16, GE Dual FDL-16, GE GEVO G12, GE 44-Ton Center Cab Dual Caterpillar, GE Cummins Switcher, GEVO G12 Tier 4 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885610 Model: BLU-21PNEM8 Blunami Sound Set: GE Diesel Scale: HO scale and larger Decoder Size: 30.5 x 15.5 x 6.5mm Connection: NEM660 21MTC integral connector Max. Motor Stall Current: 1A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other GE sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Will it fit my locomotive?This one measures 30.5 x 15.5 x 6.5mm and connects by nem660 21mtc integral connector. Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.

Read more less