O & Large Scale Trains

The Lionel 6-82918 is a 3-foot power cable extension for the Lionel Plug-Expand-Play (LionChief / FasTrack) system. With 3-pin male and female connectors, it slides between any two Plug-Expand-Play components - your transformer, terminal track, accessory cables, or other extensions - to add 3 feet of reach exactly where you need it. Looking for more O gauge track and accessories? Browse our O Gauge Trains & Track and O Gauge Track & Accessories. Features 3-foot (36 inch) power cable extension 3-pin male connector on one end, 3-pin female on the other - works with any Lionel Plug-Expand-Play component Add length between transformer and terminal track, or between any two Plug-Expand-Play parts Compatible with FasTrack Plug-Expand-Play, LionChief, and other Lionel 3-pin powered systems Plug-and-play install - no tools or wiring required Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-82918 Scale O Gauge (1:48) Length 3 feet (36 inches) Connectors 3-pin male / 3-pin female System Lionel Plug-Expand-Play Condition New FAQ Will this work with my LionChief or FasTrack Plug-Expand-Play setup?Yes. The 3-pin M/F connectors are the standard Plug-Expand-Play interface used across Lionel's modern powered accessory and track lineup. Can I chain multiple extensions together?Yes. You can connect 3-foot extensions end to end to reach any distance you need, and you can mix the 3-foot 6-82918 with longer 6-foot extensions to get the exact length without slack. Will this work with traditional O gauge or O-27 wiring?No. This is specifically for Lionel's Plug-Expand-Play 3-pin system. Older Lionel layouts using lockons and screw terminals use a different connection. Is this a single cable or a set?One single 3-foot extension cable per package.

Read more less

Lionel FasTrack O36 Curved Track 4-Pack — four 45° curved sections in O Gauge, with a wide 36" diameter curve that gives semi-scale and modern Lionel locomotives plenty of room to track smoothly. The molded gray roadbed and pre-attached ties give your layout an instant ballasted look without any extra scenery work, and the snap-together pin connections lock tight so trains roll over the joints without shorts or derailments. Eight pieces make a full O36 circle, so this 4-pack gets you a clean half-circle right out of the box — perfect for expanding an existing FasTrack oval or building out the curves on a new layout. Browse our full O Scale Track & Accessories and O Scale Trains & Track to round out your FasTrack system. What's Included Item Qty FasTrack O36 Curved Track Section (45°) 4 Features Four 45° curved sections of O36 FasTrack — eight sections form a complete circle. Realistic gray molded roadbed with pre-attached ties for a finished, ballasted look. Snap-together pin connections lock securely and align the rails automatically. 36" diameter curve gives smoother running for larger O Gauge locomotives and rolling stock. Compatible with the full Lionel FasTrack system — switches, crossovers, straights, and accessory tracks. Scale: O Scale (1:48) — three-rail O Gauge. More Information Brand Lionel Item Number 6-12033 Scale O Scale (1:48) Product Type Curved Track Pack Track System Lionel FasTrack Curve Radius O36 (36" diameter) Section Angle 45° per section (8 = full circle) Condition New UPC 023922120335 FAQ How many of these do I need to make a full circle?You'll need 8 sections (two of these 4-packs) to form a complete O36 circle. Does this work with older Lionel tubular track?No. FasTrack uses its own roadbed and pin system — you'll need a FasTrack-to-tubular transition piece to combine the two. What's the minimum locomotive that can run on O36?O36 is the smallest curve recommended for most modern Lionel locomotives. Most semi-scale and traditional engines run great; some larger scale-detailed locos require O54 or larger. Are these compatible with MTH RealTrax or Atlas O?No. FasTrack is a Lionel-only system. It does not interchange with MTH RealTrax, ScaleTrax, or Atlas O without adapter pieces.

Read more less

The Lionel 6-12015 FasTrack O36 Curved Track is a standard 45° curved section for Lionel's FasTrack O Gauge system. Eight of these sections complete a full O36 (36" diameter) circle — the same standard radius used in current Lionel starter sets — making this the workhorse curve piece for any FasTrack layout. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features 45° curved section — the standard FasTrack O36 curve O36 (36" diameter) curve geometry — matches the curves in standard Lionel starter sets Eight curves complete a full O36 circle Built on Lionel's FasTrack realistic roadbed system with pre-attached ties and ballast Snap-together connectors — no tools required Compatible with all Lionel O Gauge FasTrack and rolling stock Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-12015 Scale O Gauge (1:48) System FasTrack Curve Diameter O36 (36") Section Angle 45° Sections per Circle 8 Condition New FAQ Will this work with my existing FasTrack layout?Yes — all FasTrack pieces snap together regardless of when they were made. This is the same O36 curve used in current Lionel starter sets. How many do I need for a full circle?Eight 45° sections complete a full O36 circle. For a basic oval, eight curves plus straights are typical. What's the difference between O36, O48, O60, O72?The number is the diameter in inches. O36 (36") is the standard starter-set radius. Larger curves like O72 give a more realistic look and accommodate longer locos and cars.

Read more less

The Lionel 6-12022 FasTrack O36 Half Curve is a single 22½° half-curve track section for Lionel's FasTrack O Gauge system. Sixteen of these sections complete a full O36 (36" diameter) circle — the same standard radius used in current Lionel starter sets — making this the perfect filler piece when you need to nudge a curve geometry by half-a-section to fit your layout. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features 22½° half-curve section — half the angle of a standard FasTrack O36 curve O36 (36" diameter) curve geometry — matches the curves in standard Lionel starter sets Sixteen half curves complete a full O36 circle Built on Lionel's FasTrack realistic roadbed system with pre-attached ties and ballast Snap-together connectors — no tools required Compatible with all Lionel O Gauge FasTrack and rolling stock Scale: O Scale (1:48) More Information Brand Lionel Item Number 6-12022 Scale O Scale (1:48) Product Type Half Curve Track Section Track System FasTrack Curve Radius O36 (36" diameter) Section Angle 22½° Pieces per Circle 16 Condition New UPC 023922120229 FAQ What's the difference between this and a full O36 curve?The full O36 curve (6-12015) is a 45° section. This half curve is exactly half — 22½° — so it's the right piece to use when a full curve is too much and a straight isn't enough. How many do I need to make a circle?Sixteen half curves make a complete O36 circle. You can also mix half curves with full curves and straights to make custom layouts. Will this work with my older Lionel O36 FasTrack starter set?Yes. It's the same FasTrack roadbed system and O36 geometry used in current and recent Lionel FasTrack starter sets, so it integrates seamlessly. Is this sold individually or in a pack?Sold individually as one (1) half-curve section.

Read more less

The Lionel 6-81252 FasTrack O31 Manual Switch — Left Hand is a single left-hand turnout for Lionel's FasTrack O Gauge system. It uses a 33¾° turnout angle with the diverging route built on an O31 (31" diameter) curve, and includes a quarter-curve section so it completes a full O31 45° curve when paired with the rest of an O31 layout. Non-derailing operation lets your trains keep rolling no matter which way the switch is thrown. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features Left-hand manual switch with 33¾° turnout angle Includes a quarter curve to complete a full O31 45° curve through the diverging route Straight route length: 11 3/8" Non-derailing function — trains keep running regardless of switch position Plug-and-play powered from track voltage or auxiliary power Realistic illuminated switch lantern with interchangeable base (left or right side mounting) Built on Lionel's FasTrack realistic roadbed system Scale: O Scale (1:48) More Information Brand Lionel Item Number 6-81252 Scale O Scale (1:48) Product Type Manual Switch (Left Hand) Track System FasTrack Curve Radius O31 (31" diameter) Turnout Angle 33¾° Straight Length 11 3/8" Condition New UPC 023922812520 FAQ Will this switch work with older Lionel O36 FasTrack?The 6-81252 is an O31 switch (31" diameter diverging route), while the older 6-12017 / 6-12018 switches use O36 geometry. Both use the FasTrack roadbed system and connect physically, but the geometry differs — match your switch to the curve radius you're already running. Is this switch manually operated or does it need a controller?It's manually thrown by hand at the trackside — no controller or wiring needed. The lantern can still be illuminated from track voltage or an auxiliary power feed if you want the lantern lit. What does "non-derailing" mean?If a train approaches the switch from the diverging route while the switch is thrown to the straight route (or vice versa), the switch automatically aligns itself to match the train's path so it doesn't derail. Is the switch lantern always lit?Only when you connect track power or an auxiliary feed to the switch. Without power, the lantern is unlit but the switch still functions normally.

Read more less

The Lionel 6-12044 FasTrack Siding Track Add-on Pack expands a basic FasTrack oval into a larger oval with a working spur siding — perfect for adding switching action and operational interest to a starter layout. The pack includes a left-hand manual switch with quarter curve, an automatic uncoupling track, and an earthen-style bumper to cap the spur, all built in Lionel's realistic FasTrack roadbed system. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. What's Included Item Qty 10" FasTrack Straight Section 3 Left-Hand Manual Switch with Quarter Curve (6-12017) 1 Uncoupling Track (6-12020) 1 Earthen Bumper (6-12059) 1 Features Adds a working siding with manual switch, uncoupling section, and bumper to any FasTrack layout Left-hand manual switch with integrated quarter curve for smooth diverging routes Uncoupling track lets you drop cars on the spur without reaching into the layout Earthen-style bumper safely terminates the spur for a finished, realistic look Compatible with all Lionel O Gauge FasTrack and rolling stock equipped with Lionel-style couplers Scale: O Scale (1:48) More Information Brand Lionel Item Number 6-12044 Scale O Scale (1:48) Product Type Track Expansion Pack Track System FasTrack Layout Size 39½" × 70½" (when combined with a basic FasTrack oval) Condition New UPC 023922120441 FAQ What does this pack do for my layout?It expands a basic FasTrack starter oval into a larger oval with a spur siding — giving you a place to drop cars, build a small industry, or add switching operations to an otherwise simple loop. Will this work with my existing Lionel FasTrack?Yes. It uses the same FasTrack roadbed system found in all current Lionel FasTrack starter sets and expansion packs, so it integrates seamlessly with what you already have. Is the switch manual or remote?The included left-hand switch is manually operated — no controller or wiring required. You throw it by hand at the trackside. Do I need anything else to use the uncoupling track?The uncoupling track activates via a control button. Most Lionel starter sets include a controller capable of running the uncoupler — if yours did not, an O Gauge accessory controller will be needed to operate it.

Read more less

The Lionel 6-81313 FasTrack Plug-Expand-Play Power Lock-On is a snap-in power feed that connects your transformer to a FasTrack section using Lionel's Plug-Expand-Play (PE-P) connector system. Just snap it onto any FasTrack straight or curve, plug in the included PE-P cable, and you've got track power — no soldering, no terminal lugs, no fuss. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features Plug-Expand-Play (PE-P) compatible — works with Lionel's PE-P transformer system Snaps onto any FasTrack section — no tools, no soldering required Provides clean, reliable track power feed Compatible with Lionel CW-80, PowerHouse, and other PE-P transformers Replaces traditional terminal-section wiring Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-81313 Scale O Gauge (1:48) System FasTrack with Plug-Expand-Play Type Power Lock-On / Track Power Feed Condition New FAQ What is Plug-Expand-Play (PE-P)?It's Lionel's modern modular wiring system that uses keyed connectors instead of bare wires. Power, accessories, and switches all use the same PE-P plugs. Do I need this if I already have a terminal section?Only if you want to use the PE-P system. If your transformer has bare-wire terminals, the standard 6-12016 FasTrack Terminal Section works fine. Does the PE-P cable come with this?Yes — the connector cable is included.

Read more less

Lionel FasTrack Straight Track 30". 3-Rail with roadbed. Track components are the part of a layout that gets handled most and noticed least — until something derails. Using the matching parts for your system keeps geometry and electrical continuity correct. Specifications Brand Lionel Item Number 6-12042 UPC 023922120427 Scale O gauge Product FasTrack Straight Track 30" Details 3-Rail with roadbed Condition New Features FasTrack Straight Track 30" — 3-Rail with roadbed Matches the rest of the Lionel system for correct fit Scale: O gauge Frequently Asked Questions What scale is this?O gauge. Does this fit my existing FasTrack?Yes. It is standard Lionel FasTrack with the moulded roadbed and clips straight to any other FasTrack section. Is this new?Yes, new old stock in original packaging. Explore More Browse more from Squeaky's Trains & Things.

Read more less

Lionel FasTrack Straight Track 10". 3-Rail with roadbed. Track components are the part of a layout that gets handled most and noticed least — until something derails. Using the matching parts for your system keeps geometry and electrical continuity correct. Specifications Brand Lionel Item Number 6-12014 UPC 023922120144 Scale O gauge Product FasTrack Straight Track 10" Details 3-Rail with roadbed Condition New Features FasTrack Straight Track 10" — 3-Rail with roadbed Matches the rest of the Lionel system for correct fit Scale: O gauge Frequently Asked Questions What scale is this?O gauge. Does this fit my existing FasTrack?Yes. It is standard Lionel FasTrack with the moulded roadbed and clips straight to any other FasTrack section. Is this new?Yes, new old stock in original packaging. Explore More Browse more from Squeaky's Trains & Things.

Read more less

The Lionel 6-12017 FasTrack O36 Manual Switch — Left Hand is a non-powered turnout for Lionel's FasTrack O Gauge system. The diverging route curves to the left at the standard O36 (36" diameter) radius, letting you build sidings, passing tracks, and yard ladders by hand — no wiring or controllers needed. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features Manual (non-powered) turnout — throw by hand using the manual lever Left-hand turnout — diverging route exits to the left O36 (36" diameter) diverging radius — matches standard FasTrack curves Built on Lionel's FasTrack realistic roadbed system with pre-attached ties and ballast Snap-together connectors — no tools required for installation No wiring or controller needed — ideal for budget-friendly layouts and sidings Compatible with all Lionel O Gauge FasTrack and rolling stock Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-12017 Scale O Gauge (1:48) System FasTrack Type Manual Switch / Turnout Hand Left Diverging Radius O36 (36") Condition New FAQ What's the difference between this and a remote/powered switch?This is manual — you throw the lever by hand. Powered FasTrack switches add a motor and controller for remote operation. Manual switches are simpler, cheaper, and reliable for sidings or low-traffic spots. Can I add power to this later?Lionel sells a 6-12029 add-on switch motor that can be retrofit to manual switches if you decide to automate later. Left hand vs right hand — which do I need?Left hand: diverging route goes LEFT when entering from the points end. Right hand is the mirror. Use whichever direction your siding leaves the mainline.

Read more less