O Scale

The Digitrax SP26158B is a 26.5 x 15.5 x 9mm 8 ohm speaker that arrives already mounted in its own sealed enclosure - the part most installers end up fabricating by hand. That box is what turns a thin, tinny cone into a locomotive that actually sounds like one, and at 9mm deep the whole assembly still slides into HO hoods, tenders and O scale frames. Looking for more DCC sound gear? Browse our DCC Speakers, DCC Decoders, and DCC Accessories. Features Sealed enclosure included. No scratch-building a baffle from styrene - the speaker ships in a purpose-made box that stops the rear wave cancelling the front wave. 26.5 x 15.5 x 9mm footprint fits HO diesel hoods, steam tenders and O scale frames where a 28mm round speaker will not clear. 8 ohm, 1/2 watt - matches the speaker output on most DCC sound decoders. Bare interface wires for soldering straight to the decoder speaker pads. For the same speaker with a 2-pin plug, see the Digitrax SP26158BC. Rectangular box shape sits flat against a shell wall or floor, which is usually easier to pack than a round cone plus baffle. More Information Brand Digitrax Item Number SP26158B Product Type DCC Sound Decoder Speaker with Enclosure Speaker Shape Rectangular box Dimensions 26.5 mm x 15.5 mm x 9 mm Impedance 8 Ohm Power 1/2 Watt Enclosure Included, sealed Connection Bare interface wires (no plug) Recommended Scale HO, O, G Condition New FAQ What is the difference between the SP26158B and the SP26158BC?They are the same speaker and enclosure. The SP26158B has bare interface wires that you solder to the decoder. The SP26158BC ends in a 2-pin plug for decoders and motherboards that take a plug-in speaker. Do I still need to build a baffle?No. That is the point of this version - the enclosure is already there and sealed. Just mount it somewhere it is not blocked and keep the opening clear of the shell. Will it work with my sound decoder?Any DCC sound decoder rated for an 8 ohm speaker output, Digitrax or otherwise. If your decoder manual specifies 32 ohms, use a 32 ohm speaker such as the Digitrax SP531832B instead. How much room do I need?Just over an inch long, roughly 5/8 in. wide and 3/8 in. deep. That fits most HO diesel long hoods and tenders. For N scale, use the 13mm SP13138 or the oval SP10188.

Read more less

2 lights with 24" (60.9 cm) cable/pkg - 30mA each

Read more less

Brighten your layout with realistic floodlights! The Woodland Scenics Just Plug Lighting System Floodlights (2) make it easy to add functional, lifelike lighting to your model railroad or diorama. Perfect for illuminating yards, buildings, and outdoor scenes, these ready-to-use lights connect quickly to the Just Plug system with no soldering required. Includes 2 pre-assembled floodlights Warm white LEDs for realistic effect Ready-to-use with Just Plug Lighting System No wiring or soldering required Multi Scale – suitable for HO, N, O, and more More Information Brand Woodland Scenics Kit Type Lighting / Accessories Scale Multi Scale Model Floodlights (2) TCA Grading C-10 Mint Brand New MSRP $21.99 Item # 5958 Made In United States Availability Ships same or next business day Browse more HO Scale Figures & Vehicles and Assembled Vehicles to bring your layout to life. Frequently Asked Questions Do I need extra power supplies? – These lights plug directly into the Just Plug Lighting System hubs. A Light Hub or Expansion Hub is required. Can they be dimmed? – Yes, the Just Plug system allows brightness adjustment for each light. Are they compatible with all scales? – Yes, they are designed as Multi Scale accessories and work with HO, N, O, and more. Do I need to solder wires? – No soldering is required; everything connects with plug-and-play simplicity.

Read more less

The SoundTraxx 810131 is the 28mm Square Mega Bass Speaker 8-ohm 4 watt. This is SoundTraxx’s largest Megabass speaker which provides the best low frequency bass sounds for your steam, diesel, and electric models. Specifications Item Number: SoundTraxx 810131 Dimensions: 28 x 28 x 11.2mm(D) Frequency Response: 200Hz – 20kHz Power: 4 Watts Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

Surface Boulders are highly detailed and authentically weathered to create realism. They are ready to place right out of the package and onto your battlefield. Surface Rocks have a smooth surface to use as a base for your miniatures or as a statement piece on your gaming board. 4 pc. More Information Item # G6558 Brand All Game Terrain Scale All Scales MSRP $7.99 About Boulders Boulders are the largest Rocks. Use them as a statement piece on your miniature base or gaming board. They are highly detailed and authentically weathered to create realism and are ready to place right out of the package.

Read more less

Labelle grease with PTFE**Just a “dab” will work wonders, put a “dab” on the exposed gear box and run a minute or so, then add another “dab” and it will work its way throughout the gear box and worm gear. Additional Suggested Uses: –Model Trains: Exposed or Enclosed Gear Boxes (all scales) –RC Models. Exposed or Enclosed gear boxes on all RC models of all sizes and type. –Shock Absorbers –Slot Cars: Exposed or Enclosed gear boxes on Slot Cars of all Sizes –Bicycles: Enclosed cable rub points, gears. –Fishing Reel mechanisms –Other uses: Enclosed gear boxes on all sorts of Household items, squeaky door hinges, Riding toys, mechanical toys of all types. **PTFE has been called “the slickest substance known to man” is the parent chemical of “Teflon” which is registered trademark of Dupont Chemicals.

Read more less

Deluxe Materials Plastic Magic 10 Second Cement is a thin liquid plastic cement with a 10-15 second adjustment time and non-clog action. It is non-toxic and non-flammable, has minimal odor and almost zero emissions when compared to competitors' cements. Use with wide styrene strip and sheet, ABS and most kit plastics. 1.35oz 40mL

Read more less

Brand: JT's Mega Steam Scent: Diesel Power Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

Add texture and highlights to scenery Blends naturally with other foliage For any scale 57.7 in3 (945 cm3)

Read more less

Diffuses light evenly throughout when lights are on and eliminates the need for a building interior. Blocks outside view through the windows of an empty building, while still allowing light to shine through the windows from the inside. Use the optional Window Tint together with Diffusing Film to make windows appear dark when lights are off. Material is easy to apply. Tint and Film will each cover approximately 216 in2 (13.9 dm2) of window space.

Read more less

2 fl oz (59.1 mL)

Read more less

Purple Flowers add the perfect pop of color to your terrain feature, miniature base or gaming board. Use for exotic or native plants. These Flowers are ready-made and can be used right out of the package. Simply peel the Tufts from the tray and plant where desired. Colors may vary. More Information Item # 6628 Brand All Game Terrain Scale All Scales MSRP $9.99 About Peel 'n' Plant Tufts Peel 'n' Plant™ Tufts are designed to add texture and realism to your terrain feature, miniature base gaming board. These Tufts are ready to place right out of the package. Simply peel the Tufts from the tray and plant them where desired. Ignite the imagination and make your tabletop fantasy come to life with superior terrain materials for any miniature wargame or roleplaying game.

Read more less