Mobile / Universal

The SoundTraxx 852002 is the MC2H104AT DCC mobile decoder — a motor and lighting decoder without sound, for HO scale locomotives. It is rated 1 amp and connects by atlas light-board replacement (also fits some intermountain models). As an MC2 series decoder it runs on both DC and DCC, so it will work on a plain power pack as well as a command station, and it supports optional three-point speed curves via CVs 5 and 6. Motor control is SoundTraxx Hyperdrive. Features Runs on DC and DCC — a power pack or a command station 14 Hyperlight lighting effects across 4 function outputs — Mars Light, Pyle National Gyralite, single and dual strobes, Western-Cullen D312 rotary beacon, Prime Stratolite, Type I and II ditch lights with grade-crossing logic, dimmable headlight, Dyno-Light and FRED Rule 17 or directional lighting control, grade-crossing timers, adjustable flash rate and LED brightness correction Hyperdrive motor control for smooth low-speed running Three-point speed curves via CVs 5 and 6 NMRA DCC compliant, made in Durango, Colorado More Information Item Number: SoundTraxx 852002 Model: MC2H104AT Type: Mobile decoder — motor and lighting, no sound Scale: HO scale Decoder Size: 74 x 17 x 3mm Connection: Atlas light-board replacement (also fits some InterMountain models) Max. Motor Stall Current: 1A Function Outputs: 4 (100mA each) Operating Modes: DC and DCC Max. Track Voltage: 22V Motor Control: Hyperdrive Shop the full SoundTraxx range, compare every DCC decoder we stock, or find install parts in DCC wiring. Want engine sound as well? Look at the sound decoders instead — this one is motor and lights only. FAQ Does this make engine sound?No. Mobile decoders drive the motor and lights only. For sound, choose a Tsunami2, Blunami or Econami sound decoder. Will it run on my DC power pack?Yes. MC2 series decoders run on both DC and DCC. What does the model number mean?MC2H104AT breaks down as: MC2 series (DC and DCC), H for HO scale, 1 amp, 04 function outputs, and the connector type. Will it fit my locomotive?It measures 74 x 17 x 3mm and connects by atlas light-board replacement (also fits some intermountain models). Check that against your locomotive before ordering — the other MC decoders use different connectors and sizes.

Read more less

The Digitrax SDH167D is a powerful and versatile sound decoder designed for HO scale model trains. With advanced features such as Series 7 sound technology, this decoder delivers high-quality sound effects and enhances your model railroad experience. Easy to install and compatible with most DCC systems. 2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm 16 x 26 x 9mm Box Speaker 300uF Capacitor More Information Item # SDH167D Brand Digitrax Scale HO Scale MSRP 49.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax DH127D is a Series 7 mobile decoder for HO scale, supplied with a bare 9-pin harness socket rather than a plug. That makes it the one to reach for on hard-wired installs and older locomotives with no DCC socket: you pick the harness that suits the job, or solder directly. One amp continuous with two amps peak handles any normal HO motor. Building a DCC fleet? Browse our DCC Decoders, DCC Speakers, and DCC Accessories. Features 1.0 amp continuous, 2.0 amps peak - ample for single-motor HO diesels and steam. Digitrax 9-pin harness socket so you choose the harness: add a DHWHPS or DHWH to suit the locomotive, or hard-wire it. 2 FX7 function outputs at 200mA for directional headlights plus effects like Mars light, ditch lights, rotary beacon and flicker. Series 7 platform with back-EMF speed stabilisation for slow, steady switching moves. Programs on any NMRA DCC system and runs on any DCC layout - a Digitrax command station is not required. More Information Brand Digitrax Item Number DH127D Product Type DCC Mobile Decoder Scale HO Motor Current 1.0 A continuous / 2.0 A peak Function Outputs 2 x FX7, 200 mA Connection 9-pin harness socket (no harness fitted) Series Digitrax Series 7 Sound No - motor and function decoder only Condition New FAQ What is the difference between the DH127D, DH127P and DH127PS?Only the harness. The DH127D has a bare 9-pin socket and no harness. The DH127P adds a medium 8-pin plug on about 3.2 in. of wire, and the DH127PS has the same plug on about 1.2 in. of wire for tight installs. The decoder itself is identical. Will it fit my locomotive?It suits hard-wired installs and any HO locomotive where you supply the harness. If your loco has an 8-pin NMRA DCC-ready socket, the DH127P or DH127PS is the easier choice because the plug is already fitted. Does it have sound?No. The DH127D is a motor and function decoder. For sound in HO, look at a Digitrax SDXH series decoder or a SoundTraxx unit, plus a speaker. Do I need a Digitrax command station to use it?No. It is a standard NMRA DCC decoder and will run and program on any DCC system.

Read more less

Upgrade your model trains with the Digitrax SDXH167D series 7 sound decoder for HO Scale. Expertly designed with advanced technology, this decoder delivers clear and realistic sound effects for an immersive experience. Enjoy precise control and enhanced functionality with this top-notch decoder. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm 16 x 26 x 9mm Box Speaker 300uF Capacitor More Information Item # SDXH167D Brand Digitrax Scale HO Scale MSRP $59.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The SoundTraxx 852001 is the MC1H102P8 DCC mobile decoder — a motor and lighting decoder without sound, for HO scale locomotives. It is rated 1 amp and connects by nmra 8-pin direct plug. As an MC1 series decoder it operates on DCC only — it needs a command station and will not run on a plain DC power pack. Motor control is SoundTraxx Hyperdrive. Features DCC operation — requires a DCC command station 14 Hyperlight lighting effects across 2 function outputs — Mars Light, Pyle National Gyralite, single and dual strobes, Western-Cullen D312 rotary beacon, Prime Stratolite, Type I and II ditch lights with grade-crossing logic, dimmable headlight, Dyno-Light and FRED Rule 17 or directional lighting control, grade-crossing timers, adjustable flash rate and LED brightness correction Hyperdrive motor control for smooth low-speed running NMRA DCC compliant, made in Durango, Colorado More Information Item Number: SoundTraxx 852001 Model: MC1H102P8 Type: Mobile decoder — motor and lighting, no sound Scale: HO scale Decoder Size: 17 x 17 x 7mm Connection: NMRA 8-pin direct plug Max. Motor Stall Current: 1A Function Outputs: 2 (100mA each) Operating Modes: DCC only Max. Track Voltage: 22V Motor Control: Hyperdrive Shop the full SoundTraxx range, compare every DCC decoder we stock, or find install parts in DCC wiring. Want engine sound as well? Look at the sound decoders instead — this one is motor and lights only. FAQ Does this make engine sound?No. Mobile decoders drive the motor and lights only. For sound, choose a Tsunami2, Blunami or Econami sound decoder. Will it run on my DC power pack?No. This is an MC1 series decoder and is DCC only — it needs a command station. If you need DC too, choose an MC2 series decoder such as the 852002 or 852003. What does the model number mean?MC1H102P8 breaks down as: MC1 series (DCC only), H for HO scale, 1 amp, 02 function outputs, and the connector type. Will it fit my locomotive?It measures 17 x 17 x 7mm and connects by nmra 8-pin direct plug. Check that against your locomotive before ordering — the other MC decoders use different connectors and sizes.

Read more less

The Digitrax DH127P is the plug-and-play version of the Series 7 HO decoder: a 9-pin decoder already wired to an 8-pin NMRA medium plug on about 3.2 inches of harness. If your locomotive has a DCC-ready 8-pin socket, pull the dummy plug, drop this in, and you are running. The longer harness gives you room to route wires and tuck the decoder somewhere sensible. Building a DCC fleet? Browse our DCC Decoders, DCC Speakers, and DCC Accessories. Features 8-pin NMRA medium plug fitted on roughly 3.2 in. of harness - fits the great majority of DCC-ready HO locomotives with no soldering. 1.0 amp continuous, 2.0 amps peak - ample for single-motor HO diesels and steam. 2 FX7 function outputs at 200mA for directional headlights plus effects such as Mars light, ditch lights, rotary beacon and flicker. Series 7 platform with back-EMF speed stabilisation, so slow switching moves stay smooth and controlled. Longer harness than the DH127PS - easier routing, at the cost of more wire to tuck away in a tight shell. More Information Brand Digitrax Item Number DH127P Product Type DCC Mobile Decoder Scale HO Motor Current 1.0 A continuous / 2.0 A peak Function Outputs 2 x FX7, 200 mA Connection 9-pin socket with P-harness, 8-pin medium plug Harness Length Approx. 3.2 in. Series Digitrax Series 7 Sound No - motor and function decoder only Condition New FAQ DH127P or DH127PS - which one do I want?Same decoder, different harness length. The DH127P has about 3.2 in. of wire, which is easier to route in a roomy diesel hood. The DH127PS has about 1.2 in., which is the better choice when the socket sits right where the decoder has to go. Will it fit my locomotive?If the loco is advertised as DCC-ready with an 8-pin NMRA socket, yes. Pull the dummy plug out of the socket, keep it somewhere safe, and plug the decoder in with pin 1 lined up to the marked corner. Does it have sound?No. This is a motor and function decoder. For sound in HO, look at a Digitrax SDXH series decoder or a SoundTraxx unit, plus a speaker. Do I need a Digitrax command station?No. It is a standard NMRA DCC decoder and will run and program on any DCC system.

Read more less

While LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable. The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles. Modes The LokPilot 5 Basic is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center. It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255. The LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted. Functions The LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately. Motor The motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. Operational reliability On request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts. Protection Of course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 59029 Brand ESU Scale HO WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The SoundTraxx 851002 is the MC1Z102SQ DCC mobile decoder — a motor and lighting decoder without sound, for Z and N scale locomotives. It is rated 1 amp and connects by attached wire harness (“squid cable”). As an MC1 series decoder it operates on DCC only — it needs a command station and will not run on a plain DC power pack. Motor control is SoundTraxx Hyperdrive. Features DCC operation — requires a DCC command station 14 Hyperlight lighting effects across 2 function outputs — Mars Light, Pyle National Gyralite, single and dual strobes, Western-Cullen D312 rotary beacon, Prime Stratolite, Type I and II ditch lights with grade-crossing logic, dimmable headlight, Dyno-Light and FRED Rule 17 or directional lighting control, grade-crossing timers, adjustable flash rate and LED brightness correction Hyperdrive motor control for smooth low-speed running NMRA DCC compliant, made in Durango, Colorado More Information Item Number: SoundTraxx 851002 Model: MC1Z102SQ Type: Mobile decoder — motor and lighting, no sound Scale: Z and N scale Decoder Size: 13 x 9 x 3mm Connection: attached wire harness (“squid cable”) Max. Motor Stall Current: 1A Function Outputs: 2 (100mA each) Operating Modes: DCC only Max. Track Voltage: 22V Motor Control: Hyperdrive Shop the full SoundTraxx range, compare every DCC decoder we stock, or find install parts in DCC wiring. Want engine sound as well? Look at the sound decoders instead — this one is motor and lights only. FAQ Does this make engine sound?No. Mobile decoders drive the motor and lights only. For sound, choose a Tsunami2, Blunami or Econami sound decoder. Will it run on my DC power pack?No. This is an MC1 series decoder and is DCC only — it needs a command station. If you need DC too, choose an MC2 series decoder such as the 852002 or 852003. What does the model number mean?MC1Z102SQ breaks down as: MC1 series (DCC only), Z for Z and N scale, 1 amp, 02 function outputs, and the connector type. Will it fit my locomotive?It measures 13 x 9 x 3mm and connects by attached wire harness (“squid cable”). Check that against your locomotive before ordering — the other MC decoders use different connectors and sizes.

Read more less

Maximize the performance of your N scale model trains with the Digitrax DN167N18 mobile decoder. This plug-in Next18 decoder offers advanced control and smooth operation, enhancing the realism of your layout. With its compact design and easy installation, it's the perfect upgrade for your locomotives. Mobile Decoder Fits Next18 socket locomotives Plug-in Next18 connector Motor drive at connector capacity 6 FX3 Functions More Information Item # DN167N18 Brand Digitrax Scale N MSRP $36.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

This Digitrax SDH187MT is a high-quality Series 7 Sound Decoder designed for HO Scale models. With advanced sound technology, this decoder brings realistic audio to your train layout. Its compact design and easy installation make it a must-have for any model train enthusiast. 2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer More Information Item # SDH187MT Brand Digitrax Scale HO Scale MSRP $55.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Train Control Systems KA4 Keep-Alive® is a compact stay-alive capacitor pack that feeds backup power to your DCC decoder whenever the wheels lose contact with the rails. No more stalling on dirty track, dead frogs, or insulated turnouts — the KA4 keeps a locomotive running with its lights and sound on for roughly 6 to 20 seconds during a power interruption (depending on the locomotive and motor). It includes Blue and Black-with-White-stripe lead wires to solder to your decoder's keep-alive pads (V+ and ground), so it works with TCS and most other-brand decoders that accept an external keep-alive. Browse more decoder add-ons in our DCC Accessories collection, shop the full Train Control Systems lineup, or pair it with a new sound decoder from our DCC Decoders collection. Features Keep-Alive® stay-alive capacitor pack eliminates stalling on dirty track, dead frogs, and insulated rail joints. Powers an HO locomotive with lights on for approximately 6 to 20 seconds during a power interruption. Includes Blue and Black/White lead wires to solder to your decoder's keep-alive pads — works with TCS and most other-brand decoders. Dimensions: .52" x .52" x .45" (13.22 x 13.22 x 11.55 mm). Input rating 12–16V; works with any scale and any DCC system. More Information Brand Train Control Systems (TCS) Item Number 1668 (KA4) Type Keep-Alive / Stay-Alive Capacitor Pack Connection Blue + Black/White Wire Leads (solder-on) Dimensions .52" x .52" x .45" (13.22 x 13.22 x 11.55 mm) Input Rating 12–16V Scale Any Scale Condition New FAQ What does a Keep-Alive actually do?It stores an electrical charge and feeds it to your decoder when track power drops out, so the locomotive keeps moving and its lights and sound stay on across dirty track, frogs, and gaps. How do I connect the KA4?Solder the Blue wire to your decoder's keep-alive positive (V+) pad and the Black/White wire to the ground pad. It works with TCS decoders and most other brands that offer keep-alive connections — check your decoder's manual for the correct pads. How long will it keep my loco running?Expect roughly 6 to 20 seconds with headlights on for a typical HO locomotive, depending on motor efficiency and current draw.

Read more less

The Digitrax SDXN147A0 puts motor control, lighting and SoundFX into one N scale board decoder, and it ships with the oval speaker already matched to it. It is a drop-in for many Atlas N locomotives, which means no harness to route and no hunting for a speaker that fits - the hardest part of an N scale sound install is already solved. Building a DCC fleet? Browse our DCC Decoders, DCC Speakers, and DCC Accessories. Features Sound, motor and lighting in one N scale board - a drop-in fit for many Atlas N locomotives. 8 ohm 9 x 18 x 4mm oval speaker included, sized for N scale shells. No guesswork about what will fit. 1.0 amp continuous, 2.0 amps peak - plenty for an N scale motor. 4 FX3 function outputs at 200mA for headlights and lighting effects alongside the sound functions. SoundFX prime mover, horn and bell, with CV-adjustable volume and sound scheme. More Information Brand Digitrax Item Number SDXN147A0 Product Type DCC Sound and Motor Decoder Scale N Motor Current 1.0 A continuous / 2.0 A peak Function Outputs 4 x FX3, 200 mA Sound Yes - SoundFX Speaker Included Yes - 8 Ohm, 9 x 18 x 4 mm oval Connection Drop-in board for many Atlas N locomotives Series Digitrax Series 7 Condition New FAQ Will it fit my N scale locomotive?It is designed as a drop-in for many Atlas N models. Board decoders are shape-specific, so pull the shell and compare the factory board footprint and light positions before ordering. If it does not match, a wired N decoder is the fallback. Do I need to buy a speaker separately?No. The matched 8 ohm oval speaker is in the box. You will still get noticeably better sound if you fit it against a baffle or a sealed pocket in the shell rather than leaving it loose. Can I change the sound scheme?Yes. SoundFX schemes and volumes are set through CVs, so you can adjust horn, bell and prime mover to suit the prototype you are modelling. Do I need a Digitrax command station?Not for running - it works on any NMRA DCC system. Loading new sound files does require a Digitrax programmer.

Read more less