Tools & Adhesives
Circuitron Circuitron 800-6200 | Smail Slow Motion Switch Machine | Multi Scale
Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).12 SMAILs per pack. Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).
$34.97
Woodland Scenics Woodland Scenics 1173 | 4" Foam Support Panel | Multi Scale
Support Panels are made of extruded foam and designed to use as a strong but lightweight terrain understructure. They are quick and easy to use. Cut easily with Hot Wire Foam Cutter, Foam Knife, scissors or hobby knife. Cover with No-News Paper™ and Plaster Cloth. Just the right width to use with Road Riser™ to make an elevated road base. 4/pkg 1/16" d x 18" w x 24" l (1.59 mm x 45.7 cm x 61 cm)
$9.19
Woodland Scenics Woodland Scenics 1172 | 2" Foam Support Panel | Multi Scale
Support Panels are made of extruded foam and designed to use as a strong but lightweight terrain understructure. They are quick and easy to use. Cut easily with Hot Wire Foam Cutter, Foam Knife, scissors or hobby knife. Cover with No-News Paper™ and Plaster Cloth. Just the right width to use with Road Riser™ to make an elevated road base. 2/pkg 1/16" d x 18" w x 24" l (1.59 mm x 45.7 cm x 61 cm)
$6.90
Woodland Scenics Woodland Scenics 1167 | Sticky Spots | Multi Scale
This high-tack, round, multi-sided adhesive yields instant placement on smooth and textured surfaces. It is repositionable and leaves no residue: perfect for positioning Support Panels, Modeling Sheets and Road Risers. Packaged in a convenient, pull-out dispenser. Each Spot has approximately 1/2" diameter. 100 pcs/package
$6.29
Woodland Scenics Woodland Scenics 1444 | Foam Tack™ Glue
Specially formulated for foam but also effective on wood, cork and Homasote®* board. Foam Tack Glue dries clear and is high-tack, non-toxic and water-soluble. Use as a contact cement whenever bonding two large surfaces. 12 fl oz (354mL) *Homasote® is a registered trademark of Homasote Company.
$11.29
Woodland Scenics Woodland Scenics 646 | Accent Shakers
Use Accent Shakers to easily apply Plant Hues and Flowers for interest, highlights and shadows. Each shaker is easy to fill, and the cap has multiple opening sizes for different application amounts.
$4.49
Woodland Scenics Woodland Scenics 4539 | Dust Dabber®
Keep your models looking new! The Dust Dabber safely removes dust, dirt, and debris from your water features. Also, use Dust Dabber on other solid surfaces around your scenes.
$5.29
Kadee Kadee 246 | Tap 2-56 and Drills #50 and #43
Tap 2-56 and Drills #50 and #43 Set
$9.79
Kadee Kadee 240 | Double Headed Double Ended Pin Vise
Pin Vise Double headed pin vis Metal double headed/ended pin vise with double reversible collets at each end. Collets have four different size openings. Package Includes: (1) Mark V Gripper metal 5-prong jaw
$6.49
Kadee Kadee 169 | Rectifier Kit
Rectifier Kit Converts AC or DC track current to polarized DC current suitable for LED lighting and other electronic devices that require DC current. Includes: 1 Rectifier 1A 400V, 1 Capacitor 47UF 35V, 1 Fuse Holder 2AG Block 300V, 1 Fuse 250mA 250V 2AG 1 Each Kadee HO Pickup Truck Trouble Shooting Important!One side of each bronze electrical pickup is marked with a red dot. This red dot indicates the side that picks up the current from the track. When installing the Pickup Trucks on your rolling stock These marks MUST be on opposite rails otherwise an electrical short will occur and the Pickup Trucks may be damaged! Problems: Possible Cause: Possible Solution: Flickering Lights Dirty Track & Wheels Clean Track & Wheels Poor connection in wiring Check all wiring connections Insufficient connection betweenbronze pickups and axles Check that bronze pickup fingersare touching axle Capacitor needed A capacitor may be needed tostabilize voltage. (see Kadee HOPickup Truck Wiring Diagram) Derailments Uneven pickup tension on axles Check that all bronze pickupshave equal tension against axle Crooked or kinked pickup wire Check that pickup wire is notbinding where it protrudesthrough the floor of the car
$5.69$2.00
Woodland Scenics Woodland Scenics 639 | Static King Static Grass Applicator - Field System | Multi Scale
Static King makes it easy to model large grassy areas and ensures Static Grass is applied vertically. The Static King has an ergonomic design and can be placed upside down for easy filling. It comes with different Sieve sizes for creating a varied effect using 2-12 mm lengths of Static Grass. A divider allows the use of multiple colors and sizes at the same time for modeling realistic fields and other tall grasses. The clear hopper ensures you always know how much Static Grass you have left. Built-in bleed-off function allows it to discharge safely on its own. Power is supplied via a Power Supply or battery. Indicator light makes it easy to know if the Static King is turned on. Batteries and/or power supply not included, available as Add-On.
$67.49 - $84.82
Woodland Scenics Woodland Scenics 640 | Model-Vac | Multi Scale
The Model-Vac is the perfect strength for picking up loose landscaping material but still leaves glued items behind. This cordless modeling vacuum features an ergonomic design and can access small areas. The Model-Vac is easy to empty and does not cause damage to excess material so it can be used again. Batteries not included.
$19.98
