Tools & Adhesives
Kadee Kadee 246 | Tap 2-56 and Drills #50 and #43
Tap 2-56 and Drills #50 and #43 Set
$9.79
Kadee Kadee 240 | Double Headed Double Ended Pin Vise
Pin Vise Double headed pin vis Metal double headed/ended pin vise with double reversible collets at each end. Collets have four different size openings. Package Includes: (1) Mark V Gripper metal 5-prong jaw
$6.49
Kadee Kadee 169 | Rectifier Kit
Rectifier Kit Converts AC or DC track current to polarized DC current suitable for LED lighting and other electronic devices that require DC current. Includes: 1 Rectifier 1A 400V, 1 Capacitor 47UF 35V, 1 Fuse Holder 2AG Block 300V, 1 Fuse 250mA 250V 2AG 1 Each Kadee HO Pickup Truck Trouble Shooting Important!One side of each bronze electrical pickup is marked with a red dot. This red dot indicates the side that picks up the current from the track. When installing the Pickup Trucks on your rolling stock These marks MUST be on opposite rails otherwise an electrical short will occur and the Pickup Trucks may be damaged! Problems: Possible Cause: Possible Solution: Flickering Lights Dirty Track & Wheels Clean Track & Wheels Poor connection in wiring Check all wiring connections Insufficient connection betweenbronze pickups and axles Check that bronze pickup fingersare touching axle Capacitor needed A capacitor may be needed tostabilize voltage. (see Kadee HOPickup Truck Wiring Diagram) Derailments Uneven pickup tension on axles Check that all bronze pickupshave equal tension against axle Crooked or kinked pickup wire Check that pickup wire is notbinding where it protrudesthrough the floor of the car
$5.69$2.00
Bowser Trains Bowser Trains 23 | Foam Work Cradle - Locomotive & Freight Car Tool | N Scale
The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For N Scale models Dimensions: 4" x 7 3/4"
$10.99
ESU LLC ESU 41010 | Premium Foam Train Service Tray | 328x 166 x 68 mm | With magnetic storage recess | HO Scale
The ESU Premium Foam Train Service Tray is the ideal tool for the maintenance and care of your locomotives. Two recesses are available for perfect work: The locomotive can be clamped upside down to comfortably reach the underbody of the locomotive. In the classic inclined tray, you can easily reach the sidewalls of the locomotive or set up the locomotive almost vertically, in order to achieve the interior of the locomotive well. The Premium Foam Train Service Tray consists of a soft, fine-pored foam with high restoring force. As a result, small parts such as handle bars, antennas or pantographs cannot get caught and thus reduce the possibility of damage to a minimum. The material is resistant to oil, grease and other cleaning agents. For safe storage of small parts and screws, a magnetic storage recess is available over the entire length. The Premium Foam Train Service Tray is 328mm long and can be arranged in rows, so that longer Service Trays for the maintenance of railcars can be built. WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov
$22.29$20.06
Walthers Cornerstone Walthers Cornerstone 933-2618 | Motorized 130' Turntable - Assembled - 10-3/8" 26.3cm Overall Diameter | N Scale
Sure to be the focal point of any N Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 130' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns, 2-10-2s all the way up to a 4-8-8-4 Big Boy. It'll look great at your locomotive terminal, at junctions and anywhere else large steam locomotives must be turned. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone N Scale railroad buildings. 130' length typical of large tables built from 1920s on - some still in service today Must-have detail for engine terminals Holds locos up to 9-3/4" 24.7cm long - big enough for a 4-8-8-4! Layout mounting templates for pit and Cornerstone Turntable Control Box User-friendly, illustrated instructions simplify assembly Requires 9-15/16" 25.2cm mounting hole to be cut in layout for installation 10-3/8" 26.3cm overall diameter Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 80 rail installed on bridge
$269.99$256.49
Bachmann Bachmann 39013 | Hand-Held Track Cleaner ON30/HO/ N SCALES
Handy tool for your model railroad. Multi Scale. Use with E-Z Lube® Rail & Road Track Cleaner for great results.
$11.98$7.19
Labelle Labelle 106 | Plastic Compatible Grease w/PTFE - 1/2oz 14.8mL | Multi Scale
Labelle grease with PTFE**Just a “dab” will work wonders, put a “dab” on the exposed gear box and run a minute or so, then add another “dab” and it will work its way throughout the gear box and worm gear. Additional Suggested Uses: –Model Trains: Exposed or Enclosed Gear Boxes (all scales) –RC Models. Exposed or Enclosed gear boxes on all RC models of all sizes and type. –Shock Absorbers –Slot Cars: Exposed or Enclosed gear boxes on Slot Cars of all Sizes –Bicycles: Enclosed cable rub points, gears. –Fishing Reel mechanisms –Other uses: Enclosed gear boxes on all sorts of Household items, squeaky door hinges, Riding toys, mechanical toys of all types. **PTFE has been called “the slickest substance known to man” is the parent chemical of “Teflon” which is registered trademark of Dupont Chemicals.
$9.25
Walthers Cornerstone Walthers Cornerstone 933-2859 | Motorized 130' Turntable DC/DCC - Assembled - 19-1/8" 47.8cm Overall Diameter | HO Scale
Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most were also placed for access to backshop facilities and servicing tracks. This 130' turntable was about as big as they come - large enough to turn a 4-8-8-4 Big Boy and other large, modern engines. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone railroad maintenance structures Typical of tables built from 1900s on - some still in service today 130' 39.6m length holds locos up to 18-7/8" 46.1cm long - big enough for a 4-8-8-4! Fits most engine terminals User-friendly, illustrated instructions simplify operation and programming Layout mounting templates for pit and Cornerstone Turntable Control Box Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 83 rail installed on bridge Requires 18-1/4" 45.6cm mounting hole, 19-1/8" 47.8cm overall diameter Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately)
$279.99
Walthers Cornerstone Walthers Cornerstone 933-2320 | Cornerstone Turntable Control Box - For 933-2851, 2859, 2860 and 2618 Turntables Only (Each Sold Separately) | Multi Scale
The Walthers Cornerstone Turntable Control Box allows you to expand operations of your HO or N Scale Cornerstone Motorized Turntable up to four remote locations. This add-on control box is designed for use with the turntables as noted above. It can be used on layouts running on DC or DCC train control and provides simple operation and programming with programmable indexing for up to 99 different tracks, one-touch 180-degree bridge rotation in either direction and a simplified LED display with adjustable brightness. Allows adding additional Motorized Turntable control points Use on DC or DCC layouts Two-digit LED display Measures: 3" 7.6cm Square Inside 3-5/8" 9.2cm Square Exterior Allow 1" 2.5cm clearance; additional space may be required for cables. For advanced control using DCC, Arduino and similar advanced controllers please refer to the Cornerstone Turntable Advanced Control Module.Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately: HO Scale 90' 933-2860 HO Scale 110' 933-2851 HO Scale 130' 933-2859 N Scale 130' 933-2618
$38.95
Circuitron Circuitron 800-6200TB | Smail Slow Motion Switch Machine w Terminal Block | Multi Scale
Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).
$39.97
