All

The biggest of the sable Wargamer brushes and the fastest way to base coat without losing the point. Army Painter built the Regiment for speedpainting big swathes of troops — the model railroad equivalent being a bag of platform figures, a sprue of detail castings, or the interior of a structure. Its 9.9mm sable body carries a lot of paint, and the sharp tip means you are still in control at the edges. Pairs with the rest of the Army Painter range — or browse our Figures & Vehicles collection for something to paint. Features 9.9 mm tip — the largest sable Wargamer brush, built for covering ground fast. Sharp tip despite the size, so base coating stays neat at edges. Natural Rotmarder sable carries a lot of paint between reloads. Handmade in Germany with an 8 mm triangular grip for control. Ideal for batches of figures, detail castings and structure interiors. Works with acrylics, Speedpaints and washes in every scale. More Information Brand The Army Painter Item Number BR7007P Series Wargamer Brush Bristles Rotmarder sable (natural), handmade in Germany Tip 9.9 mm Best For Fast base coating, batches of figures, structure detail parts Condition New UPC/EAN 5713799700703 Frequently Asked Questions What is Rotmarder sable?Rotmarder is red marten — a natural sable hair prized for holding a fine point and carrying a lot of paint. Army Painter states these brushes are handmade in Germany. How do I make a sable brush last?Load paint on the tip only, never up into the ferrule. Rinse in cold water immediately after use and store it tip-up with the cap on. Dried paint in the heel is what kills a sable brush. Is this a base coating brush or a detail brush?Mostly base coating — its 9.9 mm body holds a lot of paint. But the tip stays sharp, so unlike a flat basecoater you can still work up to an edge cleanly.

Read more less

The one-brush-for-one-model choice. Army Painter sized the Character for painting single figures — a unit champion in their world, a station master or engine crew in ours — because its 8.7mm sable tip is fine and sharp enough to highlight, but full enough to lay a base coat without constant reloading. If you paint figures one at a time rather than in batches, this is the brush that does most of the job. Pairs with the rest of the Army Painter range — or browse our Figures & Vehicles collection for something to paint. Features 8.7 mm tip — carries a base coat, still sharp enough to highlight. Natural Rotmarder sable keeps a fine point at a size most synthetics cannot. Handmade in Germany with an 8 mm triangular grip for control. Ideal for single figures, detail castings, and small fittings on locos and structures. Protective cap included to keep the point safe between sessions. Works with acrylics, Speedpaints and washes in every scale. More Information Brand The Army Painter Item Number BR7006P Series Wargamer Brush Bristles Rotmarder sable (natural), handmade in Germany Tip 8.7 mm Best For Single figures, detail parts, base coat plus highlight in one brush Condition New UPC/EAN 5713799700604 Frequently Asked Questions What is Rotmarder sable?Rotmarder is red marten — a natural sable hair prized for holding a fine point and carrying a lot of paint. Army Painter states these brushes are handmade in Germany. How do I make a sable brush last?Load paint on the tip only, never up into the ferrule. Rinse in cold water immediately after use and store it tip-up with the cap on. Dried paint in the heel is what kills a sable brush. Why would I use this over a detail brush?Because it does both. The 8.7 mm tip lays a base coat and still comes to a point sharp enough to highlight, so a whole figure can be painted without swapping brushes.

Read more less

The everyday detail brush of the sable Wargamer range — a step up in body from the Insane Detail, which makes it the one most painters actually use most. Army Painter describes it as a superb sable brush for very precise details, from weapon cartridges to fine highlights on a face. On a layout that is grab irons, handrails, cab fittings, brake wheels and the faces of figures. Pairs with the rest of the Army Painter range — or browse our Figures & Vehicles collection for something to paint. Features 6.0 mm tip — fine, but with enough body to carry paint through a stroke. Natural Rotmarder sable holds a sharp point and releases paint smoothly. Handmade in Germany with an 8 mm triangular grip for control. Ideal for grab irons, handrails, cab fittings, brake wheels and figure faces. Protective cap included to keep the point safe between sessions. Works with acrylics, Speedpaints and washes in every scale. More Information Brand The Army Painter Item Number BR7005P Series Wargamer Brush Bristles Rotmarder sable (natural), handmade in Germany Tip 6.0 mm Best For Precise detail, fine highlights, faces, small fittings Condition New UPC/EAN 5713799700505 Frequently Asked Questions What is Rotmarder sable?Rotmarder is red marten — a natural sable hair prized for holding a fine point and carrying a lot of paint. Army Painter states these brushes are handmade in Germany. How do I make a sable brush last?Load paint on the tip only, never up into the ferrule. Rinse in cold water immediately after use and store it tip-up with the cap on. Dried paint in the heel is what kills a sable brush. How is this different from the Insane Detail?Insane Detail (BR7004P) is a 5.0 mm tip for the very smallest spots. This is 6.0 mm — still fine, but with more body, so it holds paint longer and is the better everyday detail brush.

Read more less

The big brother of the angled drybrush pair, and the fastest way to weather a whole surface. The 43-degree cut on its hard tip means you do not have to bend your wrist to get the bristles flat on the model — Army Painter calls the cut unique in design, and in practice it is the difference between a boxcar side taking one pass or five. Rock castings, roofs, retaining walls and hopper sides all pick up grime and highlight in seconds. Pairs with the rest of the Army Painter range — or browse our Figures & Vehicles collection for something to paint. Features 43-degree angle cut on a hard tip — no wrist-bending to make full contact with the model. Covers whole surfaces fast: boxcar sides, roofs, retaining walls, rock castings. Hard tip drives paint onto raised detail rather than flexing away from it. Toray synthetic bristles survive the scrubbing motion drybrushing demands. Signature Wargamer handle and protective cap. Works with acrylics and weathering powders in every scale. More Information Brand The Army Painter Item Number BR7010P Series Wargamer Brush Bristles Toray synthetic Tip 43-degree angle cut, hard tip Best For Drybrushing whole car sides, roofs, rock castings, scenery Condition New UPC/EAN 5713799701007 Frequently Asked Questions How is this different from the Small Drybrush?Same 43-degree cut, larger head. This one covers whole surfaces in a pass or two; the Small (BR7009P) targets a specific area like a grille or truck. What is the 43-degree cut for?It presents the bristle face flat against the model at a natural hand angle, so you get full contact without twisting your wrist. Army Painter describes it as unique in design and the reason the brush drybrushes so cleanly. What can I use it for on a layout?Weathering whole car sides and roofs, dusting rock castings and retaining walls, highlighting rock strata, and greying out ballast or roadbed. How do I clean it?Rinse in cold water right after use — drybrushing dries paint into the bristles fast. Store it tip-up with the cap on.

Read more less

The small member of Army Painter’s angled drybrush pair, and the one that gets the most use in model railroading. Its 43-degree angle cut lets you attack a specific area — a radiator grille, a truck sideframe, a run of rivets, a course of brick — without dragging weathering across the whole model. Army Painter designed it for exactly that: drybrushing part of a model rather than all of it at once. Pairs with the rest of the Army Painter range — or browse our Figures & Vehicles collection for something to paint. Features 43-degree angle cut puts the bristle face flat on the detail without bending your wrist. Sized for drybrushing a specific area — grilles, trucks, rivets, brick, tread plate. Toray synthetic bristles stand up to the scrubbing motion drybrushing demands. Ideal for rust, dust and wear on rolling stock and locomotive underframes. Signature Wargamer handle and protective cap. Works with acrylics and weathering powders in every scale. More Information Brand The Army Painter Item Number BR7009P Series Wargamer Brush Bristles Toray synthetic Tip 43-degree angle cut Best For Drybrushing detail areas — grilles, trucks, rivets, brick courses Condition New UPC/EAN 5713799700901 Frequently Asked Questions How is this different from the Large Drybrush?Same 43-degree angle cut, smaller head. This one targets a specific area — a grille or a truck. The Large (BR7010P) covers a whole boxcar side or roof in fewer passes. What is the 43-degree cut for?It presents the bristle face flat against the model at a natural hand angle, so you are not twisting your wrist to make contact. It makes controlled, repeatable drybrushing much easier. What can I use it for on a layout?Rust streaks on hoppers, dust on trucks and underframes, highlighting rivet lines and grab irons, mortar in brick, and depth in rock castings. How do I clean it?Rinse in cold water right after use — drybrushing dries paint into the bristles fast. Store it tip-up with the cap on.

Read more less

The big-area brush of the Wargamer range. Army Painter built the Monster for large models — and on a layout that means structure walls, roofs, vehicle bodies, big rock castings and backdrop work. The interesting part is why it is synthetic rather than sable: Army Painter notes that a sable brush this size could drown a model in paint, while Toray synthetic releases paint more slowly. That is exactly what you want laying a base coat across a warehouse wall without flooding the mortar lines. Pairs with the rest of the Army Painter range — or browse our Figures & Vehicles collection for something to paint. Features Sized for large surfaces — structure walls, roofs, vehicle bodies, big scenery castings. Toray synthetic releases paint slower than sable at this size, so coverage stays controlled. Lays a smooth base coat or shade across a big area in few strokes. Also handles brush-applied primer and washes on large parts. Signature Wargamer handle and protective cap. Works with acrylics, Speedpaints and washes in every scale. More Information Brand The Army Painter Item Number BR7008P Series Wargamer Brush Bristles Toray synthetic Tip Large, rounded Best For Base coating structures, vehicles, large scenery castings Condition New UPC/EAN 5713799700802 Frequently Asked Questions What would I use this for on a layout?Base coating structure walls and roofs, painting vehicle bodies, covering large rock or tunnel-portal castings, and flooding washes over big surfaces. Why synthetic instead of sable?Army Painter’s own reasoning: a sable brush this size holds so much paint it could drown a model. The Toray synthetic releases paint more slowly, which keeps a big brush controllable. Is it too big for HO or N scale?It is a broad-area brush, so it earns its keep on structures and scenery rather than on individual figures. For detail on small models, pair it with the Precise Detail (BR7001P) or Super Detail (BR7016P). How do I make it last?Rinse in cold water immediately after use, never let paint dry in the ferrule, and store the brush tip-up with the cap on.

Read more less

Base coating is the unglamorous half of a paint job, and the wrong brush makes it twice the work — too thin and you are reloading every stroke, too dry and you get streaks. The Army Painter Basecoating brush has a thicker body sized to hold a real load of paint without dumping it all on the first stroke, so structure walls, hopper sides and batches of platform figures go down smooth and even. It is the workhorse of the Hobby range. Pairs with the rest of the Army Painter range — or browse our Figures & Vehicles collection for something to paint. Features Thicker brush body holds a generous load of paint without spilling it on the first stroke. Lays clean, even coverage across larger areas — walls, roofs, rolling stock sides. Built for painting the bulk of a batch: figures, crews, whole structure kits. High-quality taklon bristles keep their shape and rinse clean. Signature Army Painter red handle, balanced for long bench sessions. Works with acrylics, Speedpaints and washes in every scale. More Information Brand The Army Painter Item Number BR7003P Series Hobby Brush Bristles Taklon synthetic Tip Round, thick body Best For Base coats, structure walls, larger areas, batches of figures Condition New UPC/EAN 5713799700307 Frequently Asked Questions What scale is this brush for?Any of them. It is sized for covering area, so it earns its keep most on HO and larger structures — but it base coats N scale buildings just as well. Can I use this for priming a whole structure?For a large kit, a rattle can or airbrush is faster. This brush is ideal for base coating walls, roofs and detail parts, and for touching up after a spray primer. What are taklon bristles?A synthetic filament that mimics the absorption of natural sable without animal hair. It holds a point well and rinses clean in cold water. How do I make it last?Load paint on the tip only, never up into the ferrule. Rinse in cold water immediately after use and store the brush tip-up.

Read more less

Highlighting is what makes a model read at arm’s length — the sharp edge of a roof rib, the worn lip of a hopper bay, the raised piping on a figure’s coat. The Army Painter Highlighting brush is the all-rounder built for exactly that: a sharp tip that reaches awkward spots, with enough body behind it to lay a clean line rather than a scratchy one. High-quality taklon bristles mimic the absorption of sable, so the paint flows off the tip instead of sitting on it. Pairs with the rest of the Army Painter range — or browse our Figures & Vehicles collection for something to paint. Features Sharp tip reaches the hard-to-get areas of a model or figure. High-quality taklon bristles mimic the absorption properties of sable. A genuine all-rounder — crisp highlight lines plus everyday detail work. Signature Army Painter red handle, balanced for long bench sessions. Works with acrylics, Speedpaints and washes in every scale. Part of the Hobby Brush series — an affordable step up from craft-store brushes. More Information Brand The Army Painter Item Number BR7002P Series Hobby Brush Bristles Taklon synthetic Tip Sharp, fine Best For Edge highlights, hard-to-reach areas, general detail Condition New UPC/EAN 5713799700208 Frequently Asked Questions What scale is this brush for?Any of them. A highlighting brush is scale-agnostic — the same brush that edges an N scale roofline will highlight an O gauge figure. How is this different from the Precise Detail brush?Highlighting carries more paint and is built to pull a clean line along an edge. Precise Detail (BR7001P) has a finer point for picking out individual rivets and small spots. What are taklon bristles?A synthetic filament that mimics the absorption of natural sable without animal hair. It holds a point well and rinses clean in cold water. How do I make it last?Load paint on the tip only, never up into the ferrule. Rinse in cold water immediately after use and store the brush tip-up.

Read more less

Add a touch of realism to your layout with these Woodland Scenics Royal Palm Premium Trees. Each Premium Tree is a hand-crafted replica of a real tree, with a bark-textured trunk and a naturally shaped branch-and-leaf structure that makes the Royal Palm instantly recognizable. This package includes 3 ready-to-plant Royal Palm trees (4-5/8", 3-1/2" and 4" (11.7, 8.9 & 10.2 cm)) and comes ready to plant — no assembly or painting required. About Premium Trees Woodland Scenics Premium Trees are among the most detailed ready-made trees in the hobby. The trunk is textured to look like real bark and the foliage is applied for a full, lifelike canopy. A molded planting pin on the base lets you position the trees securely on any scene. Because they are modeled at realistic heights, Premium Trees look at home on HO, N, O and other scale layouts, dioramas and displays. Features Hand-crafted, ready-to-plant Royal Palm trees — no assembly required. Bark-textured trunk with a realistic palm branch and leaf structure. Includes 3 trees (4-5/8", 3-1/2" and 4" (11.7, 8.9 & 10.2 cm)). Molded planting-pin base for easy, secure mounting. Suitable for HO, N, O and other multi-scale scenes. Specifications Brand Woodland Scenics Item Number TR1617 Type Ready-Made Premium Tree — Royal Palm (Palm) Height 4-5/8", 3-1/2" and 4" (11.7, 8.9 & 10.2 cm) Quantity 3 trees per package Scale Multi Scale (HO, N, O and more) Frequently Asked Questions Do I need to assemble or paint these trees?No. Premium Trees are fully finished and ready to plant right out of the package. How do I mount them on my layout?Each tree has a molded pin on the base — drill a small hole and press it in, or secure it with a dab of glue. What scale are these trees for?Premium Trees are modeled at realistic heights and work well in HO, N and O scale scenes, as well as dioramas and displays. Explore More Browse more scenery & landscaping supplies or explore our full range of Woodland Scenics products at Squeaky’s Trains & Things.

Read more less

Every Speedpaint that exists, in one box: the Complete Set 2.0 packs the entire 90-bottle range — every color, all ten one-coat metallics, and a Speedpaint Medium — plus a free basecoating brush. For clubs, commission painters, and anyone furnishing a serious paint bench in one decision. Smaller appetites: the Mega Set (50) or Most Wanted (24). Two Paint Stations rack the whole range. What's Included Item Qty Speedpaint 2.0 colors, 18ml (full range incl. 10 metallics + Medium) 90 Basecoating brush 1 Features The complete 2.0 range — no color exists that is not in this box. All 10 one-coat metallics included. Pre-loaded mixing balls throughout; recoatable 2.0 formula. Serious per-bottle savings vs building the range from singles. Free shipping from Squeaky's. More Information Brand The Army Painter Item Number WP8061P Contents 90x 18ml + brush Condition New UPC/EAN 5713799806108 FAQ Cheaper than singles?Substantially — at $3.99/single, 90 bottles would run ~$359 without the metallics premium; the set adds the brush and the box organization on top of range completeness. How is it packed for shipping?Factory-sealed retail box; we double-box for transit. Free shipping included.

Read more less

Fifty bottles of one-coat painting: 45 Speedpaint 2.0 colors (including three metallics), four bonus original-range colors, and a Speedpaint Medium — plus a free basecoating brush. This is the collection that paints whole layouts and whole armies without ever mixing "close enough." Sits between the Most Wanted Set and the everything-included Complete Set; a Paint Station holds exactly 50 bottles. What's Included Item Qty Speedpaint 2.0 colors, 18ml (incl. 3 metallics) 45 Bonus original-range colors 4 Speedpaint Medium 18ml 1 Basecoating brush 1 Features 45-color 2.0 range covers every hue family, plus industry-first one-coat metallics. Medium included for glazes, tints, and dialed-back shading. All bottles pre-loaded with stainless mixing balls. The 50-bottle count drops straight into the Paint Station rack. Free shipping from Squeaky's. More Information Brand The Army Painter Item Number WP8057P Contents 50x 18ml + brush Condition New UPC/EAN 5713799805705 FAQ Mega vs Complete?Mega = 50 bottles (45 colors); Complete = the full 90-bottle range including all 10 metallics. Mega covers 95% of painting; Complete is for never wanting to check. Is the free brush decent?It is a proper basecoating brush — fine for Speedpaint work; detail brushes are worth adding separately.

Read more less

Metallics that shade themselves: the industry-first one-coat metallic Speedpaints deliver base color, shading, and metallic shine in a single pass over primer. Ten 18ml colors — golds, silvers, bronzes, and colored metals — plus a free basecoating brush and painting guide. For rail modelers this is the fast lane to convincing brass fittings, steel walkways, copper piping, and weathered machinery. It pairs with the Speedpaint Starter Set 2.0, and Speedpaint Medium tunes the effect. What's Included Item Qty Speedpaint Metallic 2.0 colors, 18ml 10 Basecoating brush 1 Painting guide 1 Features One coat = metallic base, shading in the recesses, and highlight shine on the edges. Advanced resin formula — recoatable without lifting, like all Speedpaint 2.0. Ten metals including Talos Bronze, Broadsword Silver, and Hoplite Gold. Every bottle pre-loaded with two stainless mixing balls. Perfect for machinery, running gear, tools, loads, and detail metalwork in any scale. More Information Brand The Army Painter Item Number WP8062P Bottle Size 18 ml each (10 bottles) Condition New UPC/EAN 5713799806207 FAQ How are these different from regular metallic paint?Standard metallics need a basecoat, a wash, and a highlight. These do all three in one coat — the pigment settles dark in recesses and bright on edges. What primer works best?Black or dark grey primer makes the metals read deepest; light primer gives brighter, newer-looking metal. Can I mix them with regular Speedpaints?Yes — same 2.0 formula, and a drop of color into a metallic makes tinted metals (great for aged brass and rusted steel).

Read more less