On Clearance

The Lionel 6-12028 FasTrack Inner Passing Loop Add-on Pack expands a basic FasTrack oval into a layout with a true passing siding — perfect for letting two trains share the same loop, meeting and overtaking just like the prototype. The pack includes a matched pair of left- and right-hand manual switches with quarter curves and two O36 curve sections, all built in Lionel's realistic FasTrack roadbed system. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. What's Included Item Qty O36 Curved Track Section 2 Right-Hand Manual Switch with Quarter Curve (6-12018) 1 Left-Hand Manual Switch with Quarter Curve (6-12017) 1 Features Adds an inner passing loop to any basic FasTrack oval — run two trains on the same mainline with realistic meet-and-pass operations Matched pair of left- and right-hand manual switches keeps the geometry symmetrical O36 (36" diameter) curves match the standard Lionel starter set radius for seamless integration Manual switches throw by hand — no controller, wiring, or accessory power required Compatible with all Lionel O Gauge FasTrack and rolling stock Scale: O Scale (1:48) More Information Brand Lionel Item Number 6-12028 Scale O Scale (1:48) Product Type Track Expansion Pack Track System FasTrack Curve Radius O36 (36" diameter) Layout Size 39½" × 70½" (when combined with a basic FasTrack oval) Condition New UPC 023922120281 FAQ What does an inner passing loop do for my layout?It creates a second parallel siding inside your main oval, so two trains can run on the same loop and pass each other realistically — one tucks into the siding while the other rolls by on the main. Will this work with my existing Lionel FasTrack starter set?Yes. It uses the standard FasTrack roadbed system and O36 curves, the same geometry as Lionel's basic FasTrack starter ovals, so it drops right in. Are the switches manual or remote?Both included switches are manually operated — you throw them by hand at the trackside. No wiring or controller needed. Do I need any extra power for this pack?No. There are no electronics or accessory motors in the pack — power simply runs through the rails from your existing transformer.

Read more less

Lionel FasTrack O36 Curved Track 4-Pack — four 45° curved sections in O Gauge, with a wide 36" diameter curve that gives semi-scale and modern Lionel locomotives plenty of room to track smoothly. The molded gray roadbed and pre-attached ties give your layout an instant ballasted look without any extra scenery work, and the snap-together pin connections lock tight so trains roll over the joints without shorts or derailments. Eight pieces make a full O36 circle, so this 4-pack gets you a clean half-circle right out of the box — perfect for expanding an existing FasTrack oval or building out the curves on a new layout. Browse our full O Scale Track & Accessories and O Scale Trains & Track to round out your FasTrack system. What's Included Item Qty FasTrack O36 Curved Track Section (45°) 4 Features Four 45° curved sections of O36 FasTrack — eight sections form a complete circle. Realistic gray molded roadbed with pre-attached ties for a finished, ballasted look. Snap-together pin connections lock securely and align the rails automatically. 36" diameter curve gives smoother running for larger O Gauge locomotives and rolling stock. Compatible with the full Lionel FasTrack system — switches, crossovers, straights, and accessory tracks. Scale: O Scale (1:48) — three-rail O Gauge. More Information Brand Lionel Item Number 6-12033 Scale O Scale (1:48) Product Type Curved Track Pack Track System Lionel FasTrack Curve Radius O36 (36" diameter) Section Angle 45° per section (8 = full circle) Condition New UPC 023922120335 FAQ How many of these do I need to make a full circle?You'll need 8 sections (two of these 4-packs) to form a complete O36 circle. Does this work with older Lionel tubular track?No. FasTrack uses its own roadbed and pin system — you'll need a FasTrack-to-tubular transition piece to combine the two. What's the minimum locomotive that can run on O36?O36 is the smallest curve recommended for most modern Lionel locomotives. Most semi-scale and traditional engines run great; some larger scale-detailed locos require O54 or larger. Are these compatible with MTH RealTrax or Atlas O?No. FasTrack is a Lionel-only system. It does not interchange with MTH RealTrax, ScaleTrax, or Atlas O without adapter pieces.

Read more less

The Woodland Scenics Chain Link Fence is a detailed chain link fence ideal for industrial areas, rail yards, factories, schoolyards, parking lots and urban scenes. Molded in durable plastic and finished at the factory, it is ready to add instant, believable detail to your O Scale layout. Like every Woodland Scenics fence, it arrives hand-painted and authentically weathered, with modular sections that align quickly for fast, clean assembly. Each pack includes gates, planter pins and detail hinges so you can install a convincing run of fencing in minutes — no painting or extra tools required. Specifications Brand Woodland Scenics Item Number A3003 Scale O Scale Type Chain Link Fence Material Molded Plastic Finish Hand-Painted & Pre-Weathered Assembly Modular, align-and-install sections Includes Fence sections, gates, planter pins, detail hinges Features Hand-painted and authentically weathered for a realistic, out-of-the-package look. Modular sections align easily for quick, clean installation on any O Scale layout. Includes gates, planter pins and detail hinges for added realism. Perfect for industrial areas, rail yards, factories and urban lots. Durable molded plastic that is colorfast and built to last. Frequently Asked Questions Do I need to paint this fence?No. The Chain Link Fence comes hand-painted and pre-weathered, so it is ready to install straight from the package. How do the sections go together?The fence is molded in modular sections that align and connect easily — position them along your scene and secure with the included planter pins. What scale is this fence?This is the O Scale version. Woodland Scenics also offers matching fences in the other popular scales. Complete Your Scene Pair this fence with more scenery and landscaping details, explore the full Woodland Scenics range, or find more O Scale items in our O Scale collection.

Read more less

The Lionel 6-12044 FasTrack Siding Track Add-on Pack expands a basic FasTrack oval into a larger oval with a working spur siding — perfect for adding switching action and operational interest to a starter layout. The pack includes a left-hand manual switch with quarter curve, an automatic uncoupling track, and an earthen-style bumper to cap the spur, all built in Lionel's realistic FasTrack roadbed system. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. What's Included Item Qty 10" FasTrack Straight Section 3 Left-Hand Manual Switch with Quarter Curve (6-12017) 1 Uncoupling Track (6-12020) 1 Earthen Bumper (6-12059) 1 Features Adds a working siding with manual switch, uncoupling section, and bumper to any FasTrack layout Left-hand manual switch with integrated quarter curve for smooth diverging routes Uncoupling track lets you drop cars on the spur without reaching into the layout Earthen-style bumper safely terminates the spur for a finished, realistic look Compatible with all Lionel O Gauge FasTrack and rolling stock equipped with Lionel-style couplers Scale: O Scale (1:48) More Information Brand Lionel Item Number 6-12044 Scale O Scale (1:48) Product Type Track Expansion Pack Track System FasTrack Layout Size 39½" × 70½" (when combined with a basic FasTrack oval) Condition New UPC 023922120441 FAQ What does this pack do for my layout?It expands a basic FasTrack starter oval into a larger oval with a spur siding — giving you a place to drop cars, build a small industry, or add switching operations to an otherwise simple loop. Will this work with my existing Lionel FasTrack?Yes. It uses the same FasTrack roadbed system found in all current Lionel FasTrack starter sets and expansion packs, so it integrates seamlessly with what you already have. Is the switch manual or remote?The included left-hand switch is manually operated — no controller or wiring required. You throw it by hand at the trackside. Do I need anything else to use the uncoupling track?The uncoupling track activates via a control button. Most Lionel starter sets include a controller capable of running the uncoupler — if yours did not, an O Gauge accessory controller will be needed to operate it.

Read more less

Model a realistic road-and-rail intersection with the Woodland Scenics Wood Grade Crossing O Scale. This ready-to-place, injection-molded styrene grade crossing drops right in where a road meets the track, adding an authentic detail to your scene. Features Ready-to-place injection-molded styrene. Realistic grade-crossing surface between the rails. Paint and weather to match your scene. Specifications Brand Woodland Scenics Product Wood Grade Crossing O Scale Type Roads — Terrain System Scale O Scale Frequently Asked Questions Is this part of the Woodland Scenics Terrain System?Yes — it works together with the full Woodland Terrain System of rocks, plasters, pigments and scenery materials. Do I need anything else to use it?Woodland publishes free how-to videos and illustrated instructions; pair it with Scenic Cement™, Earth Colors™ and other Terrain System products for best results. What scale is this for?It is designed for O scale. Explore More Browse more scenery & terrain supplies or explore the full range of Woodland Scenics products at Squeaky’s Trains & Things.

Read more less

Expand your Lionel FasTrack layout into a classic figure 8 with this add-on pack. Designed to bolt directly onto the oval that comes with most Lionel Ready-to-Run O gauge sets, it adds the curves, straights, and 90-degree crossover you need to add a second loop and a crossing without buying a whole new set. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. What's Included Item Qty FasTrack O36 Curve 4 FasTrack 5" Straight 4 FasTrack 90-Degree Crossover 1 Features Converts a Lionel FasTrack oval into a figure 8 with built-in 90° crossover. Compatible with all Lionel FasTrack O gauge components — just snap it on. Roadbed-style ties give a finished look right out of the box, no ballast required. Solid steel rails with a nickel-silver finish for reliable conductivity. O36 curve radius matches the curves in standard Lionel Ready-to-Run starter sets. Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-12030 Scale O Gauge (1:48) Product Type Track Expansion Pack Track System Lionel FasTrack Layout Size 39-1/2" x 90-1/2" (when combined with a standard FasTrack oval) Curve Radius O36 (36" diameter) Condition New UPC 023922120304 FAQ Will this work with my existing Lionel starter set?Yes. This pack is designed specifically to expand the FasTrack oval included with most Lionel Ready-to-Run O gauge sets. Snap it directly onto your existing track. Do I need a second power supply for the second loop?No. Because both loops connect through the 90-degree crossover, the figure 8 runs from the same power source as your original oval. What size space do I need?About 39-1/2" x 90-1/2" of clear table or floor space when combined with a standard FasTrack oval. Is this O36 track compatible with larger Lionel locomotives?O36 fits most O gauge starter and intermediate locomotives. Some larger scale locomotives and longer cars require O48 or O72 curves — check your locomotive's minimum curve recommendation.

Read more less

The Lionel 6-12022 FasTrack O36 Half Curve is a single 22½° half-curve track section for Lionel's FasTrack O Gauge system. Sixteen of these sections complete a full O36 (36" diameter) circle — the same standard radius used in current Lionel starter sets — making this the perfect filler piece when you need to nudge a curve geometry by half-a-section to fit your layout. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features 22½° half-curve section — half the angle of a standard FasTrack O36 curve O36 (36" diameter) curve geometry — matches the curves in standard Lionel starter sets Sixteen half curves complete a full O36 circle Built on Lionel's FasTrack realistic roadbed system with pre-attached ties and ballast Snap-together connectors — no tools required Compatible with all Lionel O Gauge FasTrack and rolling stock Scale: O Scale (1:48) More Information Brand Lionel Item Number 6-12022 Scale O Scale (1:48) Product Type Half Curve Track Section Track System FasTrack Curve Radius O36 (36" diameter) Section Angle 22½° Pieces per Circle 16 Condition New UPC 023922120229 FAQ What's the difference between this and a full O36 curve?The full O36 curve (6-12015) is a 45° section. This half curve is exactly half — 22½° — so it's the right piece to use when a full curve is too much and a straight isn't enough. How many do I need to make a circle?Sixteen half curves make a complete O36 circle. You can also mix half curves with full curves and straights to make custom layouts. Will this work with my older Lionel O36 FasTrack starter set?Yes. It's the same FasTrack roadbed system and O36 geometry used in current and recent Lionel FasTrack starter sets, so it integrates seamlessly. Is this sold individually or in a pack?Sold individually as one (1) half-curve section.

Read more less

Add operating accessories to your Lionel FasTrack layout with this Accessory Activator Pack. The insulated and isolated track sections let your train's wheels trip crossing gates, highway signals, and other trackside accessories automatically as the train passes over — no extra wiring tricks required. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. What's Included Item Qty FasTrack 10" Insulated Straight Section 1 FasTrack 5" Isolated Straight Section 2 Features Activates crossing gates, signals, and other trackside accessories without extra wiring. Compatible with all Lionel FasTrack O gauge components — just snap it into your existing oval. Roadbed-style ties match the rest of the FasTrack system for a finished look. Solid steel rails with a nickel-silver finish for reliable conductivity. Works with most Lionel FasTrack-compatible accessories that have an isolated-rail trigger input. Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-12029 Scale O Gauge (1:48) Track System Lionel FasTrack Use Triggering operating accessories Condition New UPC 023922120298 FAQ What does an "accessory activator" actually do?The center rail is split so when a train passes over the insulated section, its metal wheels and axles complete a circuit that triggers a connected accessory — like dropping a crossing gate or flashing a signal — until the train moves past. Will this work with my existing Lionel FasTrack layout?Yes. These sections snap directly onto any standard FasTrack track. They're drop-in replacements for a 10" straight and two 5" straights. What accessories can I trigger with this pack?Most Lionel-style operating accessories that use isolated-rail triggering: crossing gates, highway flashers, semaphore signals, block signals, and many third-party accessories built to the same standard. Do I need a special wiring setup?No. The activator pack handles the isolation. You connect your accessory's trigger wire to the activator section's terminal, and your train does the rest as it rolls past.

Read more less

The Lionel 6-82918 is a 3-foot power cable extension for the Lionel Plug-Expand-Play (LionChief / FasTrack) system. With 3-pin male and female connectors, it slides between any two Plug-Expand-Play components - your transformer, terminal track, accessory cables, or other extensions - to add 3 feet of reach exactly where you need it. Looking for more O gauge track and accessories? Browse our O Gauge Trains & Track and O Gauge Track & Accessories. Features 3-foot (36 inch) power cable extension 3-pin male connector on one end, 3-pin female on the other - works with any Lionel Plug-Expand-Play component Add length between transformer and terminal track, or between any two Plug-Expand-Play parts Compatible with FasTrack Plug-Expand-Play, LionChief, and other Lionel 3-pin powered systems Plug-and-play install - no tools or wiring required Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-82918 Scale O Gauge (1:48) Length 3 feet (36 inches) Connectors 3-pin male / 3-pin female System Lionel Plug-Expand-Play Condition New FAQ Will this work with my LionChief or FasTrack Plug-Expand-Play setup?Yes. The 3-pin M/F connectors are the standard Plug-Expand-Play interface used across Lionel's modern powered accessory and track lineup. Can I chain multiple extensions together?Yes. You can connect 3-foot extensions end to end to reach any distance you need, and you can mix the 3-foot 6-82918 with longer 6-foot extensions to get the exact length without slack. Will this work with traditional O gauge or O-27 wiring?No. This is specifically for Lionel's Plug-Expand-Play 3-pin system. Older Lionel layouts using lockons and screw terminals use a different connection. Is this a single cable or a set?One single 3-foot extension cable per package.

Read more less

The Lionel 6-82045 is a 6-foot extension cable for the Plug-Expand-Play system, with 6-pin connectors that link your Lionel command base, controllers, and accessory ports across longer distances. If your layout has spread out and the standard cables can't reach, this is the drop-in solution — no soldering, no adapters, just plug it in and keep building. Looking for more O Gauge track and accessories? Browse our O Gauge Trains & Track and O Gauge Track & Accessories. Features Genuine Lionel Plug-Expand-Play 6-pin control cable extension 6 feet (182.9 cm) of length to extend reach across larger layouts Pre-molded 6-pin connectors plug directly into Plug-Expand-Play components No stripping, soldering, or adapters required — plug-and-play Compatible with all Lionel Plug-Expand-Play accessories, lighting, and controllers Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-82045 Scale O Gauge (1:48) Product Type Control Cable Extension Connector Type 6-pin Plug-Expand-Play Cable Length 6 feet (182.9 cm) Compatibility Lionel Plug-Expand-Play system Condition New FAQ What is Plug-Expand-Play?It's Lionel's snap-together wiring system for accessories, lighting, and command components. Each device has a 6-pin (or 3-pin power) port that accepts pre-molded cables — no stripping, soldering, or screw terminals. Will this work with my Lionel CAB-1L / Base 1L?Yes. The 6-pin control cable extension is the same connector standard used across the Plug-Expand-Play product family, including command base, controllers, and Lionchief Plus 2.0 accessories that use this cable type. What's the difference between 3-pin (6-82043) and 6-pin (6-82045)?The 3-pin version (6-82043) is a power-only cable. The 6-pin version (6-82045) is the control cable that carries control signals plus power for two-way communication between Plug-Expand-Play components. How long is the cable?6 feet (about 1.8 meters / 182.9 cm).

Read more less

The Lionel 6-82043 6' Power Cable Extension is a 3-pin Plug-n-Play cable that adds six feet of reach between a Lionel FasTrack power terminal, accessory, or transformer connection. It lets you position power feeds exactly where your layout needs them without splicing wires or stripping insulation. Looking for more O Scale track gear? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features 6-foot extension length adds reach to any standard 3-pin Plug-n-Play power cable. 3-pin Plug-n-Play connectors snap together — no wire stripping or soldering required. Works with Lionel FasTrack power terminals, transformers, and compatible accessories. Ideal for larger layouts where accessories or power drops sit far from the transformer. Can also be used to convert a male connector to bare wire ends for transformer hookup. Scale: O Scale (1:48). More Information Brand Lionel Item Number 6-82043 Scale O Scale (1:48) Product Type Power Cable Extension Track System FasTrack / Plug-n-Play Connector 3-Pin Plug-n-Play Cable Length 6 feet Condition New FAQ What does this cable plug into?Any Lionel 3-pin Plug-n-Play connector — FasTrack terminal sections, accessory pigtails, and compatible Lionel transformers or power adapters. Can I extend an existing Plug-n-Play cable with this?Yes. It's designed to add six feet of reach to any standard 3-pin Plug-n-Play run so you can place accessories or power drops farther from the transformer. Do I need to strip or splice wires?No. Both ends use Lionel's keyed 3-pin connectors that simply snap together. Will this work on an HO or N Scale layout?This cable is built for Lionel's O Scale Plug-n-Play system. It will not mate with HO or N scale track or accessories.

Read more less

Frame the entrance to your tunnel with the Woodland Scenics Cut Stone Single Portal - O Scale. This finely detailed cast plaster tunnel portal is ready to color and install, giving your tunnels a finished, prototypical look. Features Detailed cast plaster tunnel portal. Color with Earth Colors™ pigments and install. Pairs with matching retaining walls and culverts. Specifications Brand Woodland Scenics Product Cut Stone Single Portal - O Scale Type Tunnel Portals — Terrain System Scale O Scale Frequently Asked Questions Is this part of the Woodland Scenics Terrain System?Yes — it works together with the full Woodland Terrain System of rocks, plasters, pigments and scenery materials. Do I need anything else to use it?Woodland publishes free how-to videos and illustrated instructions; pair it with Scenic Cement™, Earth Colors™ and other Terrain System products for best results. What scale is this for?It is designed for O scale. Explore More Browse more scenery & terrain supplies or explore the full range of Woodland Scenics products at Squeaky’s Trains & Things.

Read more less