DCC Decoders

The SoundTraxx 885028 is a TSU-N18 Tsunami2 digital sound decoder with the ALCO sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the Next18 decoder for N and small HO models, rated 1A and suited to N and small HO models with a Next18 socket. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 9 ALCO prime movers: ALCO 539 Turbo, ALCO 539 Non-Turbo, ALCO 244 Turbo, ALCO 251A i6, ALCO 251C v12, ALCO 251C v12 Super Charged, ALCO 251C v12 Century Series, ALCO 251C v16, ALCO 251C v16 Super Charged Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885028 Model: TSU-N18 Tsunami2 Sound Set: ALCO Diesel Scale: N and small HO models with a Next18 socket Decoder Size: 25 x 9.5 x 4.1mm Connection: Next18 (N18) socket Max. Motor Stall Current: 1A Function Outputs: 6 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other ALCO sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 25 x 9.5 x 4.1mm and connects by next18 (n18) socket. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The Digitrax DS44 is a basic quad stationary decoder that puts four slow-motion turnout machines, such as the Circuitron Tortoise, under DCC control. Throw your turnouts from any throttle on the layout. It takes its power and commands straight from the track, so hookup is two wires to the rails plus the turnout machine leads. Important: the DS44 is for slow-motion (stall-motor) turnout machines only. It will not work with solenoid or twin-coil switch machines such as Atlas, Peco or Kato snap machines. Specifications Brand Digitrax Item Number DS44 Type Basic quad stationary decoder Outputs 4 (A, B, C, D), one slow-motion turnout machine each Turnout Machine Types Slow motion only Power From the track (red and black wires) Addressing Set individually or in groups of 4 (factory default 1 to 4) Scale All scales Includes 1 DS44 stationary decoder, 1 instruction card Made In USA Warranty Digitrax one-year No Worries Warranty UPC 652667080033 Features Controls 4 individual slow-motion turnout machines from your DCC throttle Quick setup: send one switch command and the DS44 takes a sequential group of 4 addresses (for example 5, 6, 7, 8) Individual setup: give each output any switch address you like (for example 6, 13, 25 and 105) Track powered, so no separate accessory power supply is needed Works with Digitrax and other NMRA-compatible DCC systems Compact, shrink-wrapped board that tucks under the benchwork Frequently Asked Questions Will the DS44 run Atlas, Peco or Kato snap switch machines?No. It only drives slow-motion stall-motor machines like the Tortoise. Solenoid (twin-coil) machines need a different stationary decoder. How do I set the addresses?With track power off, connect the red and black wires to the track. Temporarily connect the white setup wire to the same rail as the black wire to set a sequential group of 4, or to the same rail as the red wire to set each output individually. Turn power on, operate the switch address (or the 4 addresses, in order A to D) from your throttle, then disconnect the white wire and fold it away. Does it need its own power supply?No. The DS44 is powered from the track through its red and black wires. What scale is it for?Any scale. It controls the turnout machines, not the track, so it works for N, HO, O and larger. Explore More Browse more DCC Decoders and Electronics & Wiring at Squeaky's Trains & Things.

Read more less

The Digitrax DO487 is the heavy hauler of the mobile decoder range: four amps continuous and five amps peak, wired rather than plugged, for the large-scale and O scale locomotives that will cook an ordinary HO decoder. Eight FX3 function outputs at 300mA give you the lighting capacity to match, and because it is a wired decoder it goes into anything you can solder to. Building a DCC fleet? Browse our DCC Decoders, DCC Speakers, and DCC Accessories. Features 4.0 amps continuous, 5.0 amps peak - built for large-scale and O scale mechanisms, dual-motor drives and older high-draw motors. 8 FX3 function outputs at 300mA for headlights, marker lights, cab lighting, smoke units and other accessories. Wired installation - no socket required, so it suits scratch installs, brass models and repowered older locomotives. Suits HO, S, O and G scale where the current draw justifies it. Standard NMRA DCC - runs and programs on any DCC system, not just Digitrax. More Information Brand Digitrax Item Number DO487 Product Type DCC Mobile Decoder (High Capacity) Scale HO, S, O, G Motor Current 4.0 A continuous / 5.0 A peak Function Outputs 8 x FX3, 300 mA Connection Wired - no plug fitted Sound No - motor and function decoder only Condition New FAQ Do I actually need a 4 amp decoder?Only if the locomotive draws it. Measure stall current on DC before deciding - a typical single-motor HO diesel pulls well under an amp and is fine on a 1 amp decoder. Reach for the DO487 when you have a large-scale mechanism, twin motors, or an older open-frame motor. Will it fit in the locomotive?It is a physically larger board than an HO decoder, which is rarely a problem in O or G scale. In HO it is worth measuring the available space in the shell or tender before ordering. Does it have sound?No. The DO487 is a motor and function decoder. Pair it with a separate sound decoder, or choose a high-current sound decoder instead, if you want audio. How do I wire it in?Track pickups to the red and black leads, motor to orange and grey, and function outputs to your lighting. Isolate the motor completely from the frame before you connect anything - a motor still grounded to the chassis is the most common way to destroy a decoder.

Read more less

The SoundTraxx 886603 is a BLU-21PNEM8 Blunami digital sound decoder with the Electric sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is the 21-pin MTC plug-in Blunami, suited to HO scale and larger. Features AC traction motor sound with pantograph up/down (interlocked so the loco will not move with the pantograph down), trolley bell, stop-request bell, pneumatic doors and cab chatter Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches traction motor sound to the load on the motor, and the app calibrates it for you Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 8 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 886603 Model: BLU-21PNEM8 Blunami Sound Set: Electric Electric Scale: HO scale and larger Decoder Size: 30.5 x 15.5 x 6.5mm Connection: NEM660 21MTC integral connector Max. Motor Stall Current: 1A Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Electric sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Will it fit my locomotive?This one measures 30.5 x 15.5 x 6.5mm and connects by nem660 21mtc integral connector. Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.

Read more less

By default, this decoder does not come with a pre-programmed Sound Profile. Nevertheless, we provide complimentary Sound File programming for all ESU decoders. Please be aware that opting for Sound File Programming in your order might result in a shipment delay of 1 to 2 business days. Visit this link to preview ESU Sounds The LokSound 5 micro DCC Direct Kato Japan has been specially developed for installation in Kato-branded track N vehicles: in many European and Japanese locomotives of this manufacturer, the ser decoder can be installed directly below the engine instead of the analog board installed as standard. Finally, these models can also be easily retrofitted with a LokSound decoder. The LokSound 5 micro DCC Direct Kato Japan with its dimensions of 27.6mm x 14.1mm x 3mm is a pure DCC decoder and comes without a loudspeaker. Modes The LokSound 5 micro DCC Direct Kato Japan is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully to a suitable digital center.It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255. The LokSound 5 micro DCC Direct Kato Japan Decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An AUTOMATIC ABC commuter train allows automatic commuting between two stations. The LokSound 5 micro DCC Direct Kato Japan can be used on analog DC webs.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted. Sound The LokSound 5 micro DCC Direct Kato Japan Decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bits / 31250 kHz and offers hi-fi quality on its system. There is virtually no difference to the original audible anymore. A Class-D audio output with up to 3W output power controls the speakers, which can have between 4 ohms and 32 ohms impedance. A 128 Mbit sound memory provides enough capacity. All individual noises can be adjusted individually in the volume. The super-flexible sound engine without a rigid schedule allows the exemplary simulation of all conceivable rail tracks. Functions Although the LokSound 5 micro DCC Direct Kato Japan is normally installed in the motor car of a drive car set, three reinforced function outputs for lighting are available at their own discretion. All important lighting functions are available. The brightness of each output can be set separately. Motor The motor control of the LokSound 5 micro DCC Direct Kato Japan has a variable PWM clock frequency from 10kHz to 50kHz, which ensures a super-quiet drive, especially for bell anchor motors – the typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. The LokSound 5 micro DCC Direct Kato Japan Decoder delivers up to 0.9A motor power. Protection Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 58731 Brand ESU Scale N WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The SoundTraxx 885029 is a TSU-N18 Tsunami2 digital sound decoder with the Baldwin & Other sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the Next18 decoder for N and small HO models, rated 1A and suited to N and small HO models with a Next18 socket. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 12 Baldwin & Other prime movers: Baldwin VO, Baldwin 608NA, Baldwin 608A, Baldwin 606NA, Rio Grande Southern Galloping Goose, Dual Whitcomb, Fairbanks-Morse, GE GTEL UP “Slab Side”, GE GTEL UP “Veranda”, GE GTEL UP “Big Blow” A unit, GE GTEL UP “Big Blow” B unit, Cummins QSK19C x3 GenSet Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885029 Model: TSU-N18 Tsunami2 Sound Set: Baldwin & Other Diesel Scale: N and small HO models with a Next18 socket Decoder Size: 25 x 9.5 x 4.1mm Connection: Next18 (N18) socket Max. Motor Stall Current: 1A Function Outputs: 6 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Baldwin & Other sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 25 x 9.5 x 4.1mm and connects by next18 (n18) socket. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 12 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The Digitrax DH127PS is the short-harness version of the Series 7 HO decoder: the same 9-pin decoder wired to an 8-pin NMRA medium plug on roughly 1.2 inches of wire. That short lead is the whole point. In a tight shell where the socket sits exactly where the decoder needs to live, the longer harness just becomes wire you have to hide. Building a DCC fleet? Browse our DCC Decoders, DCC Speakers, and DCC Accessories. Features 8-pin NMRA medium plug on a short 1.2 in. harness - built for tight installs where there is nowhere to stuff excess wire. 1.0 amp continuous, 2.0 amps peak - ample for single-motor HO diesels and steam. 2 FX7 function outputs at 200mA for directional headlights plus effects such as Mars light, ditch lights, rotary beacon and flicker. Series 7 platform with back-EMF speed stabilisation, so slow switching moves stay smooth and controlled. Plug-and-play on any DCC-ready HO locomotive with an 8-pin socket - no soldering. More Information Brand Digitrax Item Number DH127PS Product Type DCC Mobile Decoder Scale HO Motor Current 1.0 A continuous / 2.0 A peak Function Outputs 2 x FX7, 200 mA Connection 9-pin socket with PS-harness, 8-pin medium plug Harness Length Approx. 1.2 in. Series Digitrax Series 7 Sound No - motor and function decoder only Condition New FAQ DH127PS or DH127P - which one do I want?Same decoder, different harness length. The PS has about 1.2 in. of wire for cramped installs; the P has about 3.2 in., which routes more easily in a roomy diesel hood. If you are unsure, the longer one is more forgiving - you can always coil the slack. Will it fit my locomotive?If the loco is DCC-ready with an 8-pin NMRA socket, yes. Remove the dummy plug, keep it somewhere safe in case you ever sell the loco as DC, and seat the decoder plug with pin 1 to the marked corner. Does it have sound?No. This is a motor and function decoder. For sound in HO, look at a Digitrax SDXH series decoder or a SoundTraxx unit, plus a speaker. Do I need a Digitrax command station?No. It is a standard NMRA DCC decoder and will run and program on any DCC system.

Read more less

The SoundTraxx 884012 is a TSU-2200 Tsunami2 digital sound decoder with the Steam sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the universal-style decoder that fits most HO diesels, rated 2A and suited to HO to S scale. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 63 selectable whistles, 10 exhaust chuffs, 12 bells, 10 airpumps and 8 dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Independent and train brakes with adjustable rates Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 884012 Model: TSU-2200 Tsunami2 Sound Set: Steam Steam Scale: HO to S scale Decoder Size: 35 x 18 x 6mm Connection: Universal-style hardwire with an NMRA 9-pin JST harness Max. Motor Stall Current: 2A Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Steam sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 35 x 18 x 6mm and connects by universal-style hardwire with an nmra 9-pin jst harness. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 885622 is a BLU-2200 Blunami digital sound decoder with the EMD-2 sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is the universal-style Blunami that fits most HO diesels, suited to HO and small S scale. Features 8 EMD-2 prime movers: EMD 567 12-cylinder (no transition), EMD 567C 16-cylinder non-turbo, EMD 645E 12-cylinder non-turbo, EMD 645E 12-cylinder turbo, EMD 645F 16-cylinder turbo, EMD 645E 20-cylinder turbo, EMD 710G 12-cylinder, EMD 710G 16-cylinder Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885622 Model: BLU-2200 Blunami Sound Set: EMD-2 Diesel Scale: HO and small S scale Decoder Size: 35 x 18 x 6mm Connection: NMRA 9-pin JST harness to hardwire Max. Motor Stall Current: 2A Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD-2 sound profile decoders. A speaker is not included — browse DCC speakers rated 2 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 2 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD-2 or plain EMD — which do I want?This is the EMD-2 set: a second collection of less-common EMD prime movers, called out by cylinder count. The plain EMD set covers the more common 567/645/710 variants. Match the list above to your prototype. Will it fit my locomotive?This one measures 35 x 18 x 6mm and connects by nmra 9-pin jst harness to hardwire. Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.

Read more less