Gift Ideas Under $100.00

All aboard The Polar Express! This officially licensed Polar Express Checkers Board Game brings the holiday magic of the North Pole right to your table. Perfect for fans and families alike, this winter-themed edition transforms the classic game of checkers into a festive railway adventure featuring beloved scenes and characters. Includes 24 checkers pieces and 8 locomotive king pieces Features a 13 x 21-3/8" (33 x 54.3 cm) winter-themed North Pole board Includes sticker sheet and complete instructions Great gift for fans of The Polar Express Durable game components designed for long-lasting fun More Information Brand Train Enthusiast Vendors Product Type Board Game Theme The Polar Express Model 419834 Condition New MSRP $19.99 Availability In Stock Made In China Frequently Asked Questions Q: Is this an officially licensed Polar Express product?A: Yes, it’s officially licensed and features authentic artwork and branding. Q: How big is the game board?A: The board measures approximately 13" x 21-3/8" (33 x 54.3 cm). Q: What ages is it suitable for?A: Recommended for ages 6 and up. Q: Does it include instructions?A: Yes, complete instructions are included inside the box. Q: Is it a good gift item?A: Absolutely! It’s a festive favorite for families and fans of The Polar Express.

Read more less

The LokSound by ESU LED Interior Lighting Strips are perfect for lighting HO and N Scale passenger car interiors operating on DCC layouts. They're designed for use only on track power (electrical wipers and accessories available separately). Offered with warm white (397-50708) or yellow (397-50709) LEDs they allow you to match your lighting color to your modeling era. The strips include a small potentiometer so you can adjust the brightness. For shorter cars or cabooses the strips can be cut. The red marker LEDs are on wire leads for easy placement where needed. The integral ESU decoder supports both Motorola(R) and DCC, and also works on DC analogue layouts. The operating mode is detected automatically. In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows you to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car. All effects can also be programmed once the lighting strip has been installed and the values of your DCC LED Interior Lighting Strips can be read on a programming track. Yellow 10 x 11/32" or 25.5 x .9cm More Information Item # 50709 Brand ESU Scale O, HO, TT, N Pack Size 1 MSRP $29.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Looking for the current generation? See the ESU 50718 digital passenger car lighting kit with 13 warm white LEDs, entry lighting, and expanded function control.The LokSound by ESU LED Interior Lighting Strips are perfect for lighting HO and N Scale passenger car interiors operating on DCC layouts. They're designed for use only on track power (electrical wipers and accessories available separately). Offered with warm white (397-50708) or yellow (397-50709) LEDs they allow you to match your lighting color to your modeling era. The strips include a small potentiometer so you can adjust the brightness. For shorter cars or cabooses the strips can be cut. The red marker LEDs are on wire leads for easy placement where needed. The integral ESU decoder supports both Motorola(R) and DCC, and also works on DC analogue layouts. The operating mode is detected automatically. In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows you to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car. All effects can also be programmed once the lighting strip has been installed and the values of your DCC LED Interior Lighting Strips can be read on a programming track. Warm White 10 x 11/32" or 25.5 x .9cm More Information Item # 50708 Brand ESU Scale O, HO, TT, N Pack Size 1 MSRP $29.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Brand: JT's Mega Steam Scent: Cotton Candy Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

Brand: JT's Mega Steam Scent: Grape Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

The Digitrax TL1 is a single-function DCC decoder with integrated transponding — perfect for adding a controllable function output (lights, smoke, or other accessory) to a non-decoder locomotive while also giving you Digitrax's position-tracking feature on the same board. At just 1.0" × 0.4" × 0.16", it fits in cabooses, passenger cars, lightboards, and even N-scale shells where space is tight. Looking for more DCC decoders and electronics? Browse our DCC Decoders and Electronics & Wiring collections. Features One DCC-controllable function output with full transponding (Digitrax position-tracking) built in — no separate transponder board needed. 1A continuous, 2A peak function output — plenty for headlights, marker lights, rear lights, smoke units, or other accessories. Hardwire install with color-coded leads (blue common, white function, red & black track) — works in HO, N, O, S, and G with appropriate wire gauge. Full CV programming including FX3 lighting effects (Mars, Gyralite, Strobe, Random Flicker, Soft On/Off, etc.). SuperSonic silent-running operation — no audible motor whine. Compatible with all DCC systems following NMRA standards. More Information Brand Digitrax Item Number TL1 Type Single function-output DCC decoder with transponding Function Outputs 1 (white) — 1A continuous / 2A peak Motor Output None — function-only decoder Transponding Integrated (no add-on board needed) Connection Hardwire — color-coded leads Size 1.0 × 0.4 × 0.16 in Scale Compatibility HO, N, O, S, G (any DCC scale) Condition New — sealed UPC 652667100052 FAQ What is "transponding"?Transponding is Digitrax's position-tracking technology — the TL1 reports its location back to your command station through compatible Digitrax detection sections, so you can see exactly where a transponding-equipped car or locomotive is on your layout. It's not the same as RailCom but serves a similar role. Does this drive a motor?No — the TL1 is a function-only decoder. It controls ONE output (typically a light or accessory). For motor control you need a full mobile decoder like the Digitrax DH126MT, DZ126, or any other mobile decoder. What can I wire to the function output?LEDs (with appropriate resistor), incandescent bulbs, smoke units, sound modules, ditch lights, mars lights, or any DC-powered accessory drawing under 1A continuous. FX3 effects let you simulate prototypical lighting patterns. Will it work with any DCC system?Yes — the TL1 follows NMRA DCC standards and runs on any DCC command station. Transponding readback, however, requires a Digitrax LocoNet system with appropriate detection sections (BDL168, BDL16, etc.).

Read more less

The Digitrax TF4 is a quad-function DCC decoder with integrated transponding — four independently controlled function outputs on one tiny board, plus Digitrax's position-tracking feature built right in. Perfect for adding ditch lights, mars lights, rear markers, classification lamps, smoke generators, or any other DCC-controlled accessory cluster to a non-decoder locomotive. Looking for more DCC decoders and electronics? Browse our DCC Decoders and Electronics & Wiring collections. Features Four independent DCC-controllable function outputs (white, yellow, green, purple) — control each one separately via your throttle. Integrated transponding — Digitrax position-tracking built in, no separate transponder board needed. 1A continuous, 2A peak combined function output — plenty for headlights, ditch lights, rear lights, smoke, or accessory clusters. Hardwire install with color-coded leads — works in HO, N, O, S, and G scale. Full CV programming including FX3 lighting effects (Mars, Gyralite, Strobe, Random Flicker, Soft On/Off, Rule 17, etc.) on every output. SuperSonic silent-running operation, NMRA DCC compatible. More Information Brand Digitrax Item Number TF4 Type Quad function-output DCC decoder with transponding Function Outputs 4 (white, yellow, green, purple) — 1A continuous combined Motor Output None — function-only decoder Transponding Integrated (no add-on board needed) Connection Hardwire — color-coded leads Scale Compatibility HO, N, O, S, G (any DCC scale) Condition New — sealed UPC 652667100083 FAQ What's the difference between the TF4 and the TL1?The TL1 has one function output; the TF4 has four. If you need to control multiple separate lighting circuits (headlight + ditch lights + class lamps + rear marker) the TF4 is the right call. Both have integrated transponding. Does this drive a motor?No — the TF4 is function-only. For motor + lights in one board, use a full mobile decoder like the Digitrax DH126 or DZ126. What can I wire to the function outputs?LEDs (with resistors), incandescent bulbs, smoke units, ditch lights, mars lights, signal lamps, sound modules — anything DC-driven under 1A combined draw. FX3 effects make each output simulate prototypical lighting patterns independently. Will it work with any DCC system?Yes — standard NMRA DCC. Transponding readback requires a Digitrax LocoNet command station with detection sections (BDL168, BDL16, etc.).

Read more less

This Atlas Master N scale Pullman-Standard PS-2750 3-bay hopper rolls in CSX Transportation black with yellow ex-Family Lines System lettering and road number 996968. The PS-2750 was the workhorse 70-ton coal hopper of the late 20th century — Pullman-Standard built thousands of them between 1954 and the early 1970s, and they still turn up in CSX consists today. Crisp lettering, fine end ladders, and free-rolling trucks make this a layout-ready addition to any modern coal drag or unit train. Looking for more N scale rolling stock? Browse our N Scale Trains & Track and N Scale Track & Accessories. Features Crisp CSX Transportation paint and lettering with ex-Family Lines System road number #996968 Sixteen side posts and accurate Pullman-Standard 2,750 cubic foot prototype detailing Fine end ladders and separately applied end details Die-cast hopper and center sill construction adds weight for reliable tracking AccuMate® operating knuckle couplers, free-rolling trucks Scale: N (1:160) More Information Brand Atlas Model Railroad Co. Item Number 50006998 Scale N Scale (1:160) Car Type Pullman-Standard PS-2750 3-Bay Open Hopper Road Name CSX Transportation (Ex-Family Lines System) Road Number 996968 Era Modern (1980s-Present) Coupler AccuMate® knuckle Condition New FAQ What scale is this hopper?N scale (1:160). It will run on any standard N gauge track. Is it ready to run out of the box?Yes. This is an Atlas Master release — fully assembled, painted, and ready to put on the rails. Are the AccuMate couplers compatible with Micro-Trains?The AccuMate operating knuckle couplers will couple reliably with Micro-Trains and other standard knuckle couplers in N scale. What era does this car fit?Modern era — CSX Transportation paint dates the car from the 1980s through present day.

Read more less

The Lionel 6-12025 is a 4-1/2" straight track section from Lionel's FasTrack system — the easy-to-assemble three-rail O gauge track that's been the backbone of Lionel layouts since 2003. This shorter straight is a perfect filler piece for tight spots, custom layouts, sidings, and yard ladder arrangements where a full 10" straight is too long. What's Included One Lionel FasTrack 4-1/2" straight track section Built-in roadbed with simulated ballast and tie detail Solid nickel-silver running rails and center rail Pre-installed track-pin connectors on each end Specifications Brand Lionel Item Number 6-12025 Track System FasTrack Gauge / Scale O Gauge / O Scale Type Straight Section Length 4-1/2" Construction Three-rail with built-in roadbed Compatibility Lionel FasTrack system (all FasTrack pieces snap together) About FasTrack FasTrack is Lionel's modern O-gauge track system, designed to look great straight out of the box with realistic gray ballast and dark-tie detail molded into the roadbed. The track snaps together with built-in connectors — no separate track pins to fumble with, no roadbed to add later. FasTrack is fully compatible with all Lionel O gauge locomotives and rolling stock that run on traditional tubular O track, including conventional transformer control and TMCC/Legacy command systems. FAQ Will it work with Lionel O27 trains?Yes — FasTrack is O gauge, and most O27 trains will run on it. FasTrack curves are O36 minimum, so very small O27-only locomotives may not navigate the tightest curves, but straight pieces like this 4-1/2" work fine with anything O gauge or O27. Can I mix this with traditional tubular O track?Lionel makes adapter pieces to connect FasTrack to tubular O. The adapters are sold separately. Why use a 4-1/2" straight instead of a 10" straight?Short straights are essential for fitting yards, sidings, and tight spots into your layout. A 4-1/2" piece lets you adjust spacing in increments smaller than the standard 10". More From Squeaky's All O Gauge / O Scale Track Lionel

Read more less

Add a classic railroad crossing to your Lionel FasTrack layout with this 2-pack of grade crossings. Each piece replaces a standard 10-inch FasTrack straight section and includes molded road inserts on either side, giving your trains a realistic spot where the rails meet the highway. Compatible with all Lionel FasTrack systems. Looking for more O gauge track and accessories? Browse our O Gauge Trains & Track and O Gauge Track & Accessories. What's Included Item Qty FasTrack Grade Crossing (10" straight section with molded road inserts) 2 Features Two grade crossings per package - perfect for double-track mainlines or two separate crossings on different parts of your layout Drop-in replacement for any 10" Lionel FasTrack straight section Molded road inserts on both sides give a finished, realistic appearance straight out of the box Compatible with all Lionel FasTrack track and switches 10-inch track section length, 6-1/4 inch road section width Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-12036 Scale O Gauge (1:48) Product Type Track Accessory - Grade Crossing Track System Lionel FasTrack Track Section Length 10 inches Road Section Width 6-1/4 inches Quantity per Package 2 Condition New UPC 023922120366 FAQ Will this work with my existing FasTrack layout?Yes - each grade crossing replaces a standard 10-inch FasTrack straight section and connects to the rest of your FasTrack the same way any straight piece does. How many crossings come in the package?Two. The 6-12036 ships as a 2-pack, perfect if you want a crossing on each side of a double-track mainline or two separate crossings on different parts of your layout. Does this work with O-27 tubular track?No, this is designed exclusively for Lionel FasTrack. It will not connect directly to O-27 or traditional O gauge tubular track without an adapter. Are the crossing gates animated?No - this is a simple static grade crossing with molded road inserts. For animated gates and flashers, look at the Lionel 6-12052 (Grade Crossing with Flashers) instead.

Read more less

The Lionel 6-81314 FasTrack Power Block Lock-on is the central hub for the Plug-Expand-Play accessory system. It's a 10-inch FasTrack straight section with an integrated lock-on that lets you connect up to three Plug-N-Play accessories at once and switch them between track power and a separate fixed power supply via a built-in rocker switch. An LED tells you when power is live so wiring problems are easy to spot. Looking for more O gauge gear? Browse our O Gauge Trains & Track and O Gauge Track & Accessories. Features 10-inch FasTrack straight with integrated Plug-Expand-Play lock-on Three (3) accessory ports — power up to 3 Plug-N-Play accessories from a single block Rocker switch toggles between track power and fixed power input Barrel jack input for separate accessory power supply (sold separately, 4A 18VDC) LED power indicator Scale: O Gauge — works with the FasTrack 3-rail system More Information Brand Lionel Item Number 6-81314 Scale O Gauge Track System Lionel FasTrack Section Length 10" Accessory Ports 3 (Plug-Expand-Play) Power Supply Track power or separate 4A 18VDC supply (not included) Condition New FAQ What does this do?It's a 10" FasTrack straight with three built-in Plug-Expand-Play accessory outlets, plus a rocker switch and barrel jack so accessories can run on track power OR an independent power supply. Does it include a power supply?No — the barrel jack input takes a separate 4A 18VDC supply (sold separately). It will run accessories from track power without one. Will it work with regular Lionel accessories?It only powers Lionel 3-pin Plug-Expand-Play (Plug-N-Play) accessories through its three ports. What FasTrack section is this?A 10-inch O gauge FasTrack straight with the lock-on hardware permanently attached.

Read more less

The Lionel 6-12054 FasTrack Operating Track Section is a 5" straight section with a built-in electromagnetic activator that triggers Lionel's operating cars and accessories. Use it to remotely uncouple cars, dump loads from operating hoppers, or activate any Lionel rolling stock with magnetic pickups — all from your transformer or remote. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features 5" straight section with built-in electromagnetic operating coil Activates remote uncoupling on Lionel cars with magnetic couplers Operates Lionel dump cars, log cars, milk cars, and other accessory cars Works with conventional or command-control operation Snap-together connectors — no tools required Built on Lionel's FasTrack realistic roadbed system Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-12054 Scale O Gauge (1:48) System FasTrack Length 5 inches Type Operating / Uncoupling Track Section Condition New FAQ What does this do that a regular straight doesn't?The built-in electromagnetic coil activates Lionel operating cars and uncouples cars equipped with magnetic couplers. Place it where you want a yard, siding, or operating accessory. Do I need a special controller?It works from any momentary push-button or controller that can apply track power to the activator coil. Most Lionel transformers have a dedicated operating-track button. Will my older Lionel cars work with this?Yes — any Lionel car with magnetic couplers or operating coils designed for the standard Lionel system will work.

Read more less