Gift Ideas Under $300.00

Run iconic Union Pacific power with full sound on your N scale layout. Kato's EMD SD70M in the commemorative #1979 "We Are One" scheme comes factory-equipped with an ESU LokSound 5 DCC sound decoder, delivering UP's 4,000-horsepower presence with realistic EMD prime-mover audio, horn, bell, and dynamic brake effects right out of the box. Specifications Brand Kato Item Number 176-1979-S Scale N (1:160) Road Name Union Pacific Road Number #1979 "We Are One" Prototype EMD SD70M, flat radiator Power 4,000 horsepower Decoder ESU LokSound 5, DCC with sound (factory installed) Motor Five-pole with dual brass flywheels Couplers Kato knuckle couplers Lighting Directional LED headlights Condition New Features Factory-installed ESU LokSound 5 DCC sound decoder Realistic EMD diesel prime-mover sound, horn, bell, and dynamic brake Runs on both DC and DCC layouts (full features and sound control on DCC) Union Pacific #1979 "We Are One" commemorative paint Smooth five-pole motor with dual brass flywheels Directional LED headlights and Kato knuckle couplers Scale: N (1:160) Frequently Asked Questions Is sound included?Yes. It ships with a factory-installed ESU LokSound 5 DCC sound decoder, ready to run. Will it run on a DC layout?Yes. The LokSound decoder operates on DC with basic sound; full sound and function control are available on a DCC system. What scale is this?N scale (1:160). Does it have working lights?Yes, directional LED headlights are built in. Explore More Browse more N Scale Trains & Track and N Scale Locomotives.

Read more less

The Digitrax TL1 is a single-function DCC decoder with integrated transponding — perfect for adding a controllable function output (lights, smoke, or other accessory) to a non-decoder locomotive while also giving you Digitrax's position-tracking feature on the same board. At just 1.0" × 0.4" × 0.16", it fits in cabooses, passenger cars, lightboards, and even N-scale shells where space is tight. Looking for more DCC decoders and electronics? Browse our DCC Decoders and Electronics & Wiring collections. Features One DCC-controllable function output with full transponding (Digitrax position-tracking) built in — no separate transponder board needed. 1A continuous, 2A peak function output — plenty for headlights, marker lights, rear lights, smoke units, or other accessories. Hardwire install with color-coded leads (blue common, white function, red & black track) — works in HO, N, O, S, and G with appropriate wire gauge. Full CV programming including FX3 lighting effects (Mars, Gyralite, Strobe, Random Flicker, Soft On/Off, etc.). SuperSonic silent-running operation — no audible motor whine. Compatible with all DCC systems following NMRA standards. More Information Brand Digitrax Item Number TL1 Type Single function-output DCC decoder with transponding Function Outputs 1 (white) — 1A continuous / 2A peak Motor Output None — function-only decoder Transponding Integrated (no add-on board needed) Connection Hardwire — color-coded leads Size 1.0 × 0.4 × 0.16 in Scale Compatibility HO, N, O, S, G (any DCC scale) Condition New — sealed UPC 652667100052 FAQ What is "transponding"?Transponding is Digitrax's position-tracking technology — the TL1 reports its location back to your command station through compatible Digitrax detection sections, so you can see exactly where a transponding-equipped car or locomotive is on your layout. It's not the same as RailCom but serves a similar role. Does this drive a motor?No — the TL1 is a function-only decoder. It controls ONE output (typically a light or accessory). For motor control you need a full mobile decoder like the Digitrax DH126MT, DZ126, or any other mobile decoder. What can I wire to the function output?LEDs (with appropriate resistor), incandescent bulbs, smoke units, sound modules, ditch lights, mars lights, or any DC-powered accessory drawing under 1A continuous. FX3 effects let you simulate prototypical lighting patterns. Will it work with any DCC system?Yes — the TL1 follows NMRA DCC standards and runs on any DCC command station. Transponding readback, however, requires a Digitrax LocoNet system with appropriate detection sections (BDL168, BDL16, etc.).

Read more less

The Digitrax TF4 is a quad-function DCC decoder with integrated transponding — four independently controlled function outputs on one tiny board, plus Digitrax's position-tracking feature built right in. Perfect for adding ditch lights, mars lights, rear markers, classification lamps, smoke generators, or any other DCC-controlled accessory cluster to a non-decoder locomotive. Looking for more DCC decoders and electronics? Browse our DCC Decoders and Electronics & Wiring collections. Features Four independent DCC-controllable function outputs (white, yellow, green, purple) — control each one separately via your throttle. Integrated transponding — Digitrax position-tracking built in, no separate transponder board needed. 1A continuous, 2A peak combined function output — plenty for headlights, ditch lights, rear lights, smoke, or accessory clusters. Hardwire install with color-coded leads — works in HO, N, O, S, and G scale. Full CV programming including FX3 lighting effects (Mars, Gyralite, Strobe, Random Flicker, Soft On/Off, Rule 17, etc.) on every output. SuperSonic silent-running operation, NMRA DCC compatible. More Information Brand Digitrax Item Number TF4 Type Quad function-output DCC decoder with transponding Function Outputs 4 (white, yellow, green, purple) — 1A continuous combined Motor Output None — function-only decoder Transponding Integrated (no add-on board needed) Connection Hardwire — color-coded leads Scale Compatibility HO, N, O, S, G (any DCC scale) Condition New — sealed UPC 652667100083 FAQ What's the difference between the TF4 and the TL1?The TL1 has one function output; the TF4 has four. If you need to control multiple separate lighting circuits (headlight + ditch lights + class lamps + rear marker) the TF4 is the right call. Both have integrated transponding. Does this drive a motor?No — the TF4 is function-only. For motor + lights in one board, use a full mobile decoder like the Digitrax DH126 or DZ126. What can I wire to the function outputs?LEDs (with resistors), incandescent bulbs, smoke units, ditch lights, mars lights, signal lamps, sound modules — anything DC-driven under 1A combined draw. FX3 effects make each output simulate prototypical lighting patterns independently. Will it work with any DCC system?Yes — standard NMRA DCC. Transponding readback requires a Digitrax LocoNet command station with detection sections (BDL168, BDL16, etc.).

Read more less

This Atlas Master N scale Pullman-Standard PS-2750 3-bay hopper rolls in CSX Transportation black with yellow ex-Family Lines System lettering and road number 996968. The PS-2750 was the workhorse 70-ton coal hopper of the late 20th century — Pullman-Standard built thousands of them between 1954 and the early 1970s, and they still turn up in CSX consists today. Crisp lettering, fine end ladders, and free-rolling trucks make this a layout-ready addition to any modern coal drag or unit train. Looking for more N scale rolling stock? Browse our N Scale Trains & Track and N Scale Track & Accessories. Features Crisp CSX Transportation paint and lettering with ex-Family Lines System road number #996968 Sixteen side posts and accurate Pullman-Standard 2,750 cubic foot prototype detailing Fine end ladders and separately applied end details Die-cast hopper and center sill construction adds weight for reliable tracking AccuMate® operating knuckle couplers, free-rolling trucks Scale: N (1:160) More Information Brand Atlas Model Railroad Co. Item Number 50006998 Scale N Scale (1:160) Car Type Pullman-Standard PS-2750 3-Bay Open Hopper Road Name CSX Transportation (Ex-Family Lines System) Road Number 996968 Era Modern (1980s-Present) Coupler AccuMate® knuckle Condition New FAQ What scale is this hopper?N scale (1:160). It will run on any standard N gauge track. Is it ready to run out of the box?Yes. This is an Atlas Master release — fully assembled, painted, and ready to put on the rails. Are the AccuMate couplers compatible with Micro-Trains?The AccuMate operating knuckle couplers will couple reliably with Micro-Trains and other standard knuckle couplers in N scale. What era does this car fit?Modern era — CSX Transportation paint dates the car from the 1980s through present day.

Read more less

Run modern Union Pacific freight power on your N scale layout, ready for DCC right out of the box. This Kato EMD SD70ACe wears UP's distinctive "Flag Scheme" with the Building America logo as #8497 — one of the road numbers UP picked to commemorate the 2005 Chicago & North Western merger anniversary. The SD70ACe is the latest evolution of EMD's "70" series — a 4,300-horsepower AC-traction freight workhorse that's been on the front of UP intermodals, coal trains, and merchandise consists since 2004. This is the factory DCC-equipped version (-DCC suffix). The Kato decoder is pre-installed and tuned for smooth running — drop it on DCC track and it's ready to go. Kato's hallmark engineering is all here: a five-pole motor with dual flywheels, all-wheel drive and pickup, directional LED headlights and number-board lighting, blackened low-profile wheels for Code 55 or larger rail, and Kato's body-mounted magnetic-knuckle couplers. Looking for more N scale locomotives? Browse our N Scale Trains & Track and Locomotives. Features Highly detailed body shell with prototype-accurate UP "Flag Scheme" / Building America logo as #8497 Factory-installed Kato DCC decoder — runs on DCC track straight from the box Five-pole motor with dual brass flywheels — smooth, quiet, low-speed-friendly running All-wheel drive and all-wheel electrical pickup Directional LED headlights and number-board lighting (DCC-controlled) Blackened, low-profile wheels for Code 55, Code 70, or Code 80 rail Kato magnetic-knuckle couplers, body-mounted Scale: N (1:160), Wheel arrangement: Co-Co (6-axle) More Information Brand Kato Item Number 176-8438-DCC Scale N (1:160) Prototype EMD SD70ACe Road Name Union Pacific Road Number #8497 Livery Flag Scheme / Building America Logo Era Modern (2004 to present) Engine Electronics DCC-equipped (factory-installed) Couplers Kato magnetic-knuckle, body-mounted Country of Origin Japan Condition New UPC 4949727683775 FAQ Is the DCC decoder pre-installed?Yes. The "-DCC" suffix indicates Kato's factory-installed DCC decoder. Drop it on DCC track and it runs. Does it have sound?No, this is the DCC-only version (no sound). For sound, you'd need the -LS variant or aftermarket sound install. Will it run on Code 55 track?Yes. The wheels are low-profile and blackened, so they roll cleanly on Code 55, Code 70, and Code 80 rail. What's the difference between SD70ACe and SD70M?The SD70ACe (this model) uses AC traction motors with a single inverter per truck — smoother low-speed lugging on heavy trains. The earlier SD70M used DC traction. Most Class I roads have moved to AC for new heavy freight units.

Read more less

The Lionel 6-12025 is a 4-1/2" straight track section from Lionel's FasTrack system — the easy-to-assemble three-rail O gauge track that's been the backbone of Lionel layouts since 2003. This shorter straight is a perfect filler piece for tight spots, custom layouts, sidings, and yard ladder arrangements where a full 10" straight is too long. What's Included One Lionel FasTrack 4-1/2" straight track section Built-in roadbed with simulated ballast and tie detail Solid nickel-silver running rails and center rail Pre-installed track-pin connectors on each end Specifications Brand Lionel Item Number 6-12025 Track System FasTrack Gauge / Scale O Gauge / O Scale Type Straight Section Length 4-1/2" Construction Three-rail with built-in roadbed Compatibility Lionel FasTrack system (all FasTrack pieces snap together) About FasTrack FasTrack is Lionel's modern O-gauge track system, designed to look great straight out of the box with realistic gray ballast and dark-tie detail molded into the roadbed. The track snaps together with built-in connectors — no separate track pins to fumble with, no roadbed to add later. FasTrack is fully compatible with all Lionel O gauge locomotives and rolling stock that run on traditional tubular O track, including conventional transformer control and TMCC/Legacy command systems. FAQ Will it work with Lionel O27 trains?Yes — FasTrack is O gauge, and most O27 trains will run on it. FasTrack curves are O36 minimum, so very small O27-only locomotives may not navigate the tightest curves, but straight pieces like this 4-1/2" work fine with anything O gauge or O27. Can I mix this with traditional tubular O track?Lionel makes adapter pieces to connect FasTrack to tubular O. The adapters are sold separately. Why use a 4-1/2" straight instead of a 10" straight?Short straights are essential for fitting yards, sidings, and tight spots into your layout. A 4-1/2" piece lets you adjust spacing in increments smaller than the standard 10". More From Squeaky's All O Gauge / O Scale Track Lionel

Read more less

Add a classic railroad crossing to your Lionel FasTrack layout with this 2-pack of grade crossings. Each piece replaces a standard 10-inch FasTrack straight section and includes molded road inserts on either side, giving your trains a realistic spot where the rails meet the highway. Compatible with all Lionel FasTrack systems. Looking for more O gauge track and accessories? Browse our O Gauge Trains & Track and O Gauge Track & Accessories. What's Included Item Qty FasTrack Grade Crossing (10" straight section with molded road inserts) 2 Features Two grade crossings per package - perfect for double-track mainlines or two separate crossings on different parts of your layout Drop-in replacement for any 10" Lionel FasTrack straight section Molded road inserts on both sides give a finished, realistic appearance straight out of the box Compatible with all Lionel FasTrack track and switches 10-inch track section length, 6-1/4 inch road section width Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-12036 Scale O Gauge (1:48) Product Type Track Accessory - Grade Crossing Track System Lionel FasTrack Track Section Length 10 inches Road Section Width 6-1/4 inches Quantity per Package 2 Condition New UPC 023922120366 FAQ Will this work with my existing FasTrack layout?Yes - each grade crossing replaces a standard 10-inch FasTrack straight section and connects to the rest of your FasTrack the same way any straight piece does. How many crossings come in the package?Two. The 6-12036 ships as a 2-pack, perfect if you want a crossing on each side of a double-track mainline or two separate crossings on different parts of your layout. Does this work with O-27 tubular track?No, this is designed exclusively for Lionel FasTrack. It will not connect directly to O-27 or traditional O gauge tubular track without an adapter. Are the crossing gates animated?No - this is a simple static grade crossing with molded road inserts. For animated gates and flashers, look at the Lionel 6-12052 (Grade Crossing with Flashers) instead.

Read more less

The Lionel 6-81314 FasTrack Power Block Lock-on is the central hub for the Plug-Expand-Play accessory system. It's a 10-inch FasTrack straight section with an integrated lock-on that lets you connect up to three Plug-N-Play accessories at once and switch them between track power and a separate fixed power supply via a built-in rocker switch. An LED tells you when power is live so wiring problems are easy to spot. Looking for more O gauge gear? Browse our O Gauge Trains & Track and O Gauge Track & Accessories. Features 10-inch FasTrack straight with integrated Plug-Expand-Play lock-on Three (3) accessory ports — power up to 3 Plug-N-Play accessories from a single block Rocker switch toggles between track power and fixed power input Barrel jack input for separate accessory power supply (sold separately, 4A 18VDC) LED power indicator Scale: O Gauge — works with the FasTrack 3-rail system More Information Brand Lionel Item Number 6-81314 Scale O Gauge Track System Lionel FasTrack Section Length 10" Accessory Ports 3 (Plug-Expand-Play) Power Supply Track power or separate 4A 18VDC supply (not included) Condition New FAQ What does this do?It's a 10" FasTrack straight with three built-in Plug-Expand-Play accessory outlets, plus a rocker switch and barrel jack so accessories can run on track power OR an independent power supply. Does it include a power supply?No — the barrel jack input takes a separate 4A 18VDC supply (sold separately). It will run accessories from track power without one. Will it work with regular Lionel accessories?It only powers Lionel 3-pin Plug-Expand-Play (Plug-N-Play) accessories through its three ports. What FasTrack section is this?A 10-inch O gauge FasTrack straight with the lock-on hardware permanently attached.

Read more less

The Lionel 6-12054 FasTrack Operating Track Section is a 5" straight section with a built-in electromagnetic activator that triggers Lionel's operating cars and accessories. Use it to remotely uncouple cars, dump loads from operating hoppers, or activate any Lionel rolling stock with magnetic pickups — all from your transformer or remote. Looking for more O Scale track and accessories? Browse our O Scale Trains & Track and O Scale Track & Accessories. Features 5" straight section with built-in electromagnetic operating coil Activates remote uncoupling on Lionel cars with magnetic couplers Operates Lionel dump cars, log cars, milk cars, and other accessory cars Works with conventional or command-control operation Snap-together connectors — no tools required Built on Lionel's FasTrack realistic roadbed system Scale: O Gauge (1:48) More Information Brand Lionel Item Number 6-12054 Scale O Gauge (1:48) System FasTrack Length 5 inches Type Operating / Uncoupling Track Section Condition New FAQ What does this do that a regular straight doesn't?The built-in electromagnetic coil activates Lionel operating cars and uncouples cars equipped with magnetic couplers. Place it where you want a yard, siding, or operating accessory. Do I need a special controller?It works from any momentary push-button or controller that can apply track power to the activator coil. Most Lionel transformers have a dedicated operating-track button. Will my older Lionel cars work with this?Yes — any Lionel car with magnetic couplers or operating coils designed for the standard Lionel system will work.

Read more less

Add classic Southern Railway muscle to your layout with this Atlas Master Gold EMD SD-35 equipped with LokSound DCC and Sound. This highly detailed HO scale locomotive combines smooth operation, realistic lighting, and authentic sounds with Atlas’ proven die-cast construction and fine scale detailing. HO Scale EMD SD-35 in Southern #3030 Equipped with ESU LokSound Select Dual-Mode decoder for DC or DCC layouts Realistic die-cast underframe for superior pulling power Five-pole skewed armature motor with dual flywheels for smooth performance Golden-white directional LEDs and separate marker lights Detailed cab interior with crew figures Factory-installed AccuMate knuckle couplers Separately-applied windshield wipers, metal grab irons, and fine handrails Scale fans and grille detail for authentic appearance Includes optional snowplow (not installed) Supports all DCC programming modes and function mapping F0–F28 NMRA 21-pin plug for DCC decoder connection Follows all NMRA DCC standards and recommended practices More Information Brand Atlas Model EMD SD-35 Roadname Southern Railway #3030 Scale HO Scale Control Sound & DCC (LokSound) MSRP $294.95 Item # 10004478 Made In China Explore more HO Scale Locomotives from Squeaky’s Trains. Frequently Asked Questions Is this model DCC-equipped? Yes, it includes a factory-installed ESU LokSound Select Dual-Mode decoder. Can it run on DC layouts? Yes, it can operate on both DC and DCC systems. Does it have sound? Yes, authentic EMD 567 sounds through LokSound decoder. What’s included? Locomotive, optional snowplow, and user documentation. What curve radius is recommended? Operates on standard HO curves of 18" or larger.

Read more less

Build the Iconic 1968 Chevy El Camino Street MachineThis AMT Kustom Kruisers release delivers classic American car culture in 1:25 scale. Packed with authentic details and customization options, the 1968 El Camino Street Machine is perfect for display builds or creative custom projects. Add a standout muscle-era Chevy to your model car collection. 1:25 scale plastic model kit • Skill level 2 • Paint and glue required 108 parts with crisp detail 396 “Big Block” V8 engine with authentic El Camino dashboard Custom lowered suspension and detailed interior with bucket seats 5‑spoke custom wheels with wide directional tires All‑new decal sheet: three stripe colors, custom blue flames, body badges, gauges, and more Molded in white, clear, transparent red, and chrome‑plated parts Black vinyl tires Built length: approx. 8.125 inches Recommended for ages 10+ More Information Brand AMT Kit Type Plastic Model Kit Scale 1:25 Model 1968 Chevy El Camino Street Machine Parts Count 108 Skill Level 2 Built Size Approx. 8.125 inches long Age Recommendation 10+ Availability Ships same or next business day Item # AMT1484 HS Code 9503.00.00 Browse more Vehicle Model Kits in stock at Squeaky’s Trains. Frequently Asked Questions Does the kit come pre‑painted? No, paint and glue are required. Are decals included? Yes, an all‑new sheet with stripes, flames, and gauges is included. Is this a good kit for customization? Yes, the Street Machine theme and parts selection are ideal for custom builds. What tools do I need? Hobby knife, sprue cutters, files, adhesives, and paints are recommended.

Read more less

Add modern undercover utility to your HO layout with this silver Ford® Expedition SSV from Walthers SceneMaster. Based on the iconic Ford® SUV used by fire, police, and government services from 1997 onward, this unmarked unit features realistic body detailing, interior, and rolling wheels — all factory finished and layout ready. Licensed Ford® Expedition SSV body with accurate detailing Unmarked unit with silver finish – no decals or lightbar Fully assembled with clear windows, interior, and rolling wheels Assembled Vehicle – no painting or customization needed Perfect for modern police, fire, utility, or city layout scenes More Information Brand Walthers SceneMaster Kit Type Assembled Vehicle Scale HO Scale (1:87) Model 949-12043 Color Silver TCA Grading C-10 Mint – Brand New Availability Ships same or next business day MSRP $15.98 Item # 949-12043 Made In China Manuals Not required Explore HO Scale | Shop SceneMaster Vehicles | Browse All HO Vehicles Frequently Asked Questions Is this item assembled? Yes, it comes fully built and painted. Can I repaint or re-decal it? No, this model is prefinished and comes as-is. Does it include emergency lights? No, this is an unmarked vehicle with no lightbar.

Read more less