In Stock
-
SoundTraxx SoundTraxx 810158 | CurrentKeeper 2-Pin Wiring Harness
Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin “Quick Plug” to improve performance over dirty track and switches.
$7.16
-
Woodland Scenics Woodland Scenics 640 | Model-Vac | Multi Scale
The Model-Vac is the perfect strength for picking up loose landscaping material but still leaves glued items behind. This cordless modeling vacuum features an ergonomic design and can access small areas. The Model-Vac is easy to empty and does not cause damage to excess material so it can be used again. Batteries not included.
$19.98
-
Woodland Scenics Woodland Scenics 623 | Static Grass Light Green 7mm | Multi Scale
Static Grass 42 grams Grass length: 7mm
$4.59 $4.13
-
Woodland Scenics Woodland Scenics 617 | Static Grass Dark Green 4mm
Static Grass 42 grams Grass length: 3mm
$4.59
-
Woodland Scenics Woodland Scenics 1211 | Water System - Realistic Water | Multi Scale
Use to model still or slow-moving water, such as ponds, rivers, lakes and more. Pour directly from the bottle. Realistic Water is self-leveling, water soluble, won’t crack and has minimal shrinkage. Surface dries firm and clear in approximately 24 hours, depending on humidity conditions. Non-toxic. Seal water area with Plaster Cloth and use only Woodland Scenics® Earth Colors™ Liquid Pigment, Water Undercoat™ or 100% acrylic paint when preparing your water feature. One bottle covers an area 17" (43.1 cm) in diameter if poured to a depth of 1/8" (0.31 cm). 16 fl oz (473 mL)
$20.49
-
SoundTraxx SoundTraxx 852002 | DCC Mobile Decoder MC2H104AT | HO Scale
HO-scale, 4-function decoder that measures 74 x 17 x 3mm designed to replace the existing manufacturer light board in Atlas HO diesel models, some InterMountain Railway models, and those using a similar physical design. This decoder will operate in both DC and DCC. Dimensions: 74 x 17 x 3mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 DCC Track Voltage: 21 Volts Maximum
$23.16
-
Bowser Trains Bowser Trains 24 | Foam Work Cradle | Locomotive & Freight Car Tool | O Scale
The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For O (& some G) Scale models Dimensions: 8"w x 16"
$13.99
-
Woodland Scenics Woodland Scenics 622 | Static Grass Medium Green 7mm
Static Grass 42 grams Grass length: 7mm
$4.59 $4.13
-
Woodland Scenics Woodland Scenics 615 | Static Grass Light Green 2mm
Static Grass 70 grams Grass length: 2mm
$4.49
-
Woodland Scenics Woodland Scenics 5681 | Port Sharing Device | Multi Scale
Use the Port Sharing Device with a Light Hub or Sequencing Light Hub to add up to four Stick-On or Nano LED Lights per Light Port. Provide power quickly and easily to all of your Just Plug products. Just Plug's modular design allows for easy expansion and gives you the ability to control individual light brightness.
$7.59
-
Deluxe Materials Deluxe Materials AD29 | Tacky Wax | Multi Scale
Wax adhesive for holding miniatures in place whilst allowing re-positioning. Easily remove with warm water and soap. 28 grams
$6.79 $6.11
-
SoundTraxx SoundTraxx 810155 | Mini Cube 2 Oval Speaker/Baffle
SoundTraxx’s tiniest speaker comes with a properly proportioned speaker enclosure and provides remarkable volume for tiny models! Dimensions: 13 x 9 x 9.4mm(D)Frequency Response: 100Hz – 10kHzPower: 40mW (Nominal) 75mW (Peak)Impedance: 32 Ohms Note: When using this speaker with a decoder that has a 1-2 Watt, 8 Ohm amplifier; it must be wired in parallel with another 32 Ohm speaker to create a 16 Ohm load for the amplifier.
$13.15
