On Sale

The LM-3S is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3S is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs and sounds! The LM-3S has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3S module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio!The LM-3S is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V – 18V Light Outputs 6   The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

Read more less

An entire DCC system in the palm of your hand! The Power Cab system can operate one or two HO locomotives. The Power Cab provides all of the capability and ease of use that you’ve heard about in the NCE Power Pro system, at an entry level price.Installation is a snap. Hook two wires to your track and plug in the cab. You’re off and running trains!The Power Cab kit contains: Power Cab 7' Power Cab Cable PCP Power Panel Power Supply Pro Cab Coiled Cord Manual. More Information Item # 0025 Scale Multi Scale

Read more less

Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price.  It offers simplified advanced train operation for any size layout and is fully expandable.  You won’t have to start over when you want to do more with your railroad. Zephyr Express Set Includes: DCS52 All-In-One Throttle/Command Station/Booster to run your layout PS314 Power supply to provide power to run your DCS52 Zephyr Express Quickstart Guide Zephyr Express Manual   Zephyr Express Offers: Cost effective entry level LocoNet Compatible system Color 2.4” LCD Screen. Large Backlit Keypad. Speed control knob and direction switch with brake. Integrated USB Computer Interface Easy 2 and 4 digit addressing. Smooth speed control. Run multiple trains at once without blocking! Run up to 20 addresses at the same time on your system. Run up to 20 throttles at the same time on your system.   Jump Ports for using DC power packs as additional throttles Use one or two smooth DC power packs as throttles to control DCC equipped locomotives. Simple, cost effective way to add more throttles to your Zephyr Express set. Makes it easy to share the fun of DCC with layout visitors and young operators. Functions on locos controlled by Jump throttles remain active. Over 9000 Locomotive Addresses Use Address 00 to run one or more locos without DCC decoders Two Digit Addressing is easy to use. (Address 01-127) Four Digit Addressing-use the number painted on your engines as its address.   3.0 Amps of Power to run multiple trains. Booster outputs 13V DC for safe operation in N and HO scales. Function Control Control lights and sound with 29 functions (F0-F28) Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down. Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder). Stationary Decoders, Turnout Control & Turnout Position Reporting Access to stationary decoder control for turnouts and other devices. Control 2000+ stationary decoder addresses. Consisting Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos. Advanced consisting, allows only advanced consist capable mobile decoders. Basic consisting, program decoders to run on same address. Decoder Programming Built in read/write programmer that can read and write all CVs. Supports Direct programming (Digitrax preferred method). Also supports paged & register mode programming. Operations mode programming can be used to program decoders on the layout. Expandability with Digitrax LocoNet Use Zephyr Express as a starting point for your Digitrax LocoNet System, then add components. Use Zephyr Express as an expansion set with Digitrax equipment you already have installed. Add Radio or IR via LocoNet. Just plug-in a UR90, or UR92 receiver and add IR and/or Radio throttles. Comes Complete with DCS52 Command Station, PS314 Power Supply, and System Reference Manual. More Information Item # ZEPE / DCS52  Brand Digitrax Scale Multi Scale MSRP 245.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Zephyr Express Manual V2 /Quickstart Guide / Decoder Manual V2 / Specification Sheet / Zephyr Express Manual V1

Read more less

This product is specifically designed to be used with DC and/or RailPro products. It cannot be used with DCC products. The AR-1 is used to power special configurations of track such as below. Track configuration like below would cause a short circuit if connected without the use of an AR-1. Note that if you follow Rail ’A’ around you will notice that it connects to Rail ‘B’! That is just like putting a piece of metal across Rail ’A’ and Rail ‘B’ which would cause a short circuit and would cause a power supply to shut down. The solution to power special track configurations like below is to add insulation gaps and power the sections with an AR-1. The AR-1 can also be used to isolate small sections of track, limiting the impact of short circuits if derailments occur to just one area of your layout. Features: All Solid State Design Simple Connection with Only 4 Wires No Adjustments Necessary Provides Short Circuit Isolation for a Section of Track Status Indicator Light Fast and Secure Spring Clamp Connecters Fully Enclosed Circuit Board Electronics Size: 4.60 x 3.00 x 1.18 inches Our all solid state design has many advantages over relay based designs. With the relay based designs we tested you could see the locomotive jerk when it crossed the gap at slow speeds. With our AR-1 we saw no visible change in speed at all! Further, compared to relay based designs, solid state units are far less likely to fail, switch many times faster and all without that annoying relay clicking sound.      

Read more less

Use Green Grass Fine Turf to model realistic grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage. Use for any scale. Add texture and highlights to scenery Model Grass, weeds, and dirt Blends naturally with other foliage Colorfast For any scale 21.6 in3 (353 cm3)

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less

Keep the coal moving at heavy HO industries with the Cornerstone Coal Conveyor with Transfer House. This detailed structure kit is complete with the transfer house, four conveyors and accessories to build a complete facility. Other features include: Essential detail for power plants, paper mills, steel mills and other heavy industries Prototypes route coal from rotary dumper to storage to boilers Perfect addition to any heavy industry fueled by coal Fits 1930s to present day Includes parts for four detailed conveyors and accessories Add-on machinery head house for use with Lakefront Energy Power Plant (#933-4172, sold separately) included Molded in one color with acetate windows Model a complete power grid with these Cornerstone kits, including the Lakeshore Energy Power Plant (#933-4172), Modern High-Voltage Transmission Towers (#933-3343), Rotary Dumper (#933-4170), Substation (#933-4175), Intermediate Height "Wood" Utility Poles (#933-4173), plus SceneMaster Utility Poles (#949-4120) and Utility Company Vehicles (#949-11636 series), each sold separately

Read more less