Track

Separately applied roof walks, ladder, brake wheel & brake lines Weighted, detailed underframes See-through roof walks Metal couplers and sprung die-cast trucks True scale dimensions with accurate details Accurate painting and lettering 2-rail cars feature scale wheels and body-mounted scale couplers 3-Rail trucks pre-drilled for Adjust-A-Coupler™ System (sold separately) Minimum diameter curve: O-31 (3-Rail) Minimum radius curve: 24" (2 Rail)

Read more less

Code 83 HO Scale Manual Switch Right Side

Read more less

Code 83 HO Scale Nickel Silver Rail 22″ Radius Curve Snap-Track pieces in bulk (no packaging). Pricing is per single piece.

Read more less

Custom-Line Turnouts are prototypically accurate, featuring blackened metal frogs and rivetless switch points that provide superior electrical conductivity. These turnouts can be powered using an under-table switch machine or standard remote and manual code 83 switch machines. All Custom-Line Turnouts have the same geometry as the current Atlas code 100 versions, for drop-in installation in Atlas’ and other layout plans. Please note that you cannot substitute a Custom-Line for a Snap-Switch as their geometries are different. Code 83 HO Scale Brown Ties, Nickel Silver Rail

Read more less

Atlas’ code 83 line is fine quality, prototypical track for the modeler who is looking for track that is more exact-to-scale than code 100. Atlas code 83 track has fine brown ties and smaller nickel silver rail. A big advantage of Atlas’ code 83 track is its reasonable price. With Atlas you know you are getting the best-looking, most affordable code 83 on the market today! Code 83 HO Scale Nickel Silver Rail 2″ Straight Track 4 Pack

Read more less

SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 Plus is multi-protocol and can be used with control panels according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 Plus can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 exit pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case: In pulse mode, the output is switched on as soon as a switching command is received. Since the output automatically switches off again as soon as a time stored in the decoder has been reached, a burn-through of magnetic articles is prevented. At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps. In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Gerade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for incandescent lamp simulation). Set The SwitchPilot 3 Plus can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51831 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).12 SMAILs per pack. Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

Kato's line of ground level UNITRACK offers a variety of pieces and turnouts to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Code 83 nickel silver rails Attached roadbed Compatible with DC (Analog) and DCC HO Scale 1 per package

Read more less

Code 100 HO Scale Nickel Silver Rail 22″ Radius Curve Snap-Track pieces in bulk (no packaging).

Read more less

Code 83 HO Scale Manual Switch (Left) Nickel Silver Rail Blackened metal frog allows powering by Atlas Snap-Relay Frog Angle is true #6 – 9°, 30′ Cut-outs for rail joiners Concealed nail holes.

Read more less