The HC-3 is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features. Product Specifications: Dimensions: 6.1 x 3.4 x 1.5 in   Simply touch the screen to take control of a locomotive or accessory, adjust settings and much more!Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your HC-3 to transmit and receive information!Setting up your RailPro system is easy. When you buy new RailPro Ready products, or new RailPro modules for locomotives and accessories, simply press the “Find Product” button and the HC-3 will automatically load a picture of the product. You can take control of the product by touching the picture of the product!With a couple touches on the screen, you can link multiple locomotives together for more pulling power! With one more touch, you can unlink the locomotives. Our Direct Radio technology allows the locomotives to communicate together to ensure each locomotive pulls its share of the load.Multiple HC-3’s can be used at the same time to allow additional family and friends to enjoy your model layout! Also, multiple locomotives and other accessories can be used simultaneously for complete model layout control!The HC-3 comes complete with built in rechargeable batteries. The HC-3 is equipped with USB port to connect to a PC. You can go to Ring Engineering’s Internet site and download new pictures, sounds, and even new programs to add more functionality to your RailPro system. You do not need a computer to use the HC-3, but this can prove to be a very useful feature.

Read more less

Simplify your model train setup with the Digitrax PR4, a versatile USB to LocoNet interface and decoder programmer. Designed to make decoder programming and interfacing your layout with your computer easier than ever, the PR4 is an essential tool for both hobbyists and professionals. Key Features: Seamless Switching: The PR4 automatically switches between computer interface and decoder programming modes without the need for manual intervention. Electrical Isolation: Ensures stability and protection by electrically isolating the USB and LocoNet connections. Compact Design: Packaged in a smaller footprint, the PR4 offers all the great features of its predecessor, the PR3, in a more convenient size. High-Speed Programming: Optimized for Direct mode, the PR4 programs decoders up to three times faster than the PR3. SoundLoader Compatibility: Compatible with Digitrax SoundLoader, allowing you to program sound projects to SFX decoder. Wide Compatibility: Programs CVs for most DCC decoders and supports LocoNet MS100 mode with fully buffered input and output data. Standalone Operation: Can operate independently for CV and SoundFX programming without needing a Digitrax Command Station. User-Friendly: Features automatic configuration with no jumpers or switches required, and LED state indicator lights for easy monitoring. Firmware Updates: Stay up-to-date with the latest features and improvements via firmware updates available from the Digitrax website. Why Choose the Digitrax PR4? The Digitrax PR4 is not just a programming tool; it’s a comprehensive solution for enhancing your model train’s digital command control capabilities. Whether you’re a hobbyist looking to streamline your setup or a professional seeking reliable and efficient tools, the PR4 offers the perfect balance of functionality, performance, and ease of use. Applications: Model Train Layouts: Ideal for interfacing your model train layout with your computer for seamless control and programming. Decoder Programming: Perfect for programming CVs and sound projects to DCC decoders, making it a versatile tool for various model train setups. Custom Projects: Suitable for custom model train projects where precise control and programming are essential. Specifications: Interface: USB to LocoNet Dimensions: Compact and space-saving design Compatibility: Works with most operating systems and DCC decoders Included Accessories: Comes with a PS14 power supply Enhance Your Model Train Experience Upgrade your model train setup with the Digitrax PR4 USB to LocoNet Interface with Decoder Programmer. Its high-speed programming, seamless switching, and user-friendly features make it the perfect choice for anyone looking to enhance their model train experience. More Information Item # PR4 Brand Digitrax MSRP $95.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet / Instruction Sheet

Read more less

The new ESU PowerPack Mini can be wired to all fourth and fifth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (1 Farad capacity) the unit supplies power to all light and motor functions as well as to the sound module. Subject to the energy consumption of your model it may continue to move for up to three seconds. The PowerPack Mini incorporates an integral charging circuit controlled by the decoder. Therefore it may be connected even during programming. In order to avoid an undue load on the booster in case there are several models in the same booster sector, the charging current is limited. The buffer time can be reduced by means of a CV. This may be useful to assure the correct stopping position ahead of signals showing the “Stop” aspect (red signal). Although it is considerably smaller than its predecessor, the space requirements of the PowerPack Mini of about 15.7 mm x 9.7 mm x 13 mm must be taken into account when installing this unit. A three-pole wire harness connects the PowerPack Mini to the decoder. The wires are already soldered to the PowerPack Mini and must be soldered to the appropriate solder pads of the decoder. More Information Item # 54671 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the wires from your existing signals to the terminals on the TSMK and plug your Signal Driver Cable in on the plug provided. More Information Item # TSMK Brand Digitrax Warranty No Worries Warranty (read more) MSRP $17.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less

Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability) Up to 8 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over temperature and short circuit protection Track status indicators Stabilized track drive output Over-voltage protected Auto-Shutdown when command control signal is lost to prevent “runaway” trains IPL updatable More Information Item # DB210 Brand Digitrax Scale Multi Scale MSRP 159.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA3 will power an HO-Scale locomotive with headlights on for approximately 6 to 20 seconds (depending on the locomotive and the efficiency of the motor). This Keep-Alive® includes a Blue and a Black w/ White Stripe wire to attach it to a decoder.

Read more less

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned and coming in at half the size of a KA4, the KA2 will power HO or N scale locomotives with approximately one-third of the capacitance of KA3/KA4 devices (depending on the locomotive and motor). This Keep-Alive® includes a 2-Pin Quick Connector Harness for plugging into decoders with a compatible socket. , such as the T4.     Dimensions:  0.35" x 0.35" x 0.61" or 8.9mm x 8.9mm x 15.5mm Scale: HO Scale N Scale Input Rating: 12 to 16V   For more information on how to connect Keep-Alive® including with other manufacturer's decoder products, click the tab above labeled "Documents."

Read more less

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned and coming in at half the size of a KA3, the KA1 will power HO or N scale locomotives with approximately one-third of the capacitance of KA3/KA4 devices (depending on the locomotive and motor). This Keep-Alive® includes a 2-Pin Quick Connector Harness for plugging into decoders with a compatible socket. , such as the T4.   Dimensions: 1.063" x 0.35" x 0.244" or 27mm x 8.9mm x 6.2mm Scale: HO Scale N Scale Input Rating: 11 to 16V   For more information on how to connect Keep-Alive® including with other manufacturer's decoder products, click the tab above labeled "Documents."

Read more less

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. This Keep-Alive® includes a 2-Pin Quick Connector Harness for plugging into decoders with a compatible socket. , such as the T4. Dimensions:  . 52” x .52” x .45” or 13.22mm x 13.22mm x 11.55mm Scale: HO Scale Input Rating: 12 to 16V   For more information on how to connect Keep-Alive® including with other manufacturer's decoder products, click the tab above labeled "Documents."

Read more less