Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how to do this? The Profi Decoder tester makes it easy for you: simply connect the tester to your command station or the LokProgrammer. It enables you to test any decoder without exposing it to any external factors caused by the locomotive that may influence its performance. Features In order to make things as easy as possible for you, the Profi Decoder Tester is equipped with some useful features. It has all commonly used interface sockets for connecting a decoder for the smaller scale models: Besides a 6-pole NEM 651 socket and the 8-pole NEM 652 socket, it also has an 21MTC interface as per NEM 660, a PluX22 socket as well as a Next18 interface: No matter which type of decoder you have: Simply plug it in – it will fit! And that’s all there is to it! Decoders without any interface can be contacted with individual terminals.  A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output: Thus it is quite easy to check on the low speed performance and the even speed of the decoder. An LED monitor informs you about the functioning of the headlights and back-up lights as well as the function outputs AUX1 through AUX6. For testing LokSound decoders we have integrated a 20 mm speaker. You may choose if the integral speaker should be switched off or if it should have 100 Ohm respectively 16 Ohm – thus the Decoder Tester is perfectly suitable for any ESU decoder generation! Two SUSI plugs facilitate the direct test of optional SUSI modules as well as the connection to another circuit board. The electrical connection to either the command station or the LokProgrammer is facilitated by a removable, 2-pole terminal block (same system as used on the LokProgrammer and the ECoS) or via two solder points. The dimensions of the ESU Decoder Tester are 99 x 74 x 34mm. WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The HC-3 is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features. Product Specifications: Dimensions: 6.1 x 3.4 x 1.5 in   Simply touch the screen to take control of a locomotive or accessory, adjust settings and much more!Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your HC-3 to transmit and receive information!Setting up your RailPro system is easy. When you buy new RailPro Ready products, or new RailPro modules for locomotives and accessories, simply press the “Find Product” button and the HC-3 will automatically load a picture of the product. You can take control of the product by touching the picture of the product!With a couple touches on the screen, you can link multiple locomotives together for more pulling power! With one more touch, you can unlink the locomotives. Our Direct Radio technology allows the locomotives to communicate together to ensure each locomotive pulls its share of the load.Multiple HC-3’s can be used at the same time to allow additional family and friends to enjoy your model layout! Also, multiple locomotives and other accessories can be used simultaneously for complete model layout control!The HC-3 comes complete with built in rechargeable batteries. The HC-3 is equipped with USB port to connect to a PC. You can go to Ring Engineering’s Internet site and download new pictures, sounds, and even new programs to add more functionality to your RailPro system. You do not need a computer to use the HC-3, but this can prove to be a very useful feature.

Read more less

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned and coming in at half the size of a KA4, the KA2 will power HO or N scale locomotives with approximately one-third of the capacitance of KA3/KA4 devices (depending on the locomotive and motor). This Keep-Alive® includes a 2-Pin Quick Connector Harness for plugging into decoders with a compatible socket. , such as the T4.     Dimensions:  0.35" x 0.35" x 0.61" or 8.9mm x 8.9mm x 15.5mm Scale: HO Scale N Scale Input Rating: 12 to 16V   For more information on how to connect Keep-Alive® including with other manufacturer's decoder products, click the tab above labeled "Documents."

Read more less

Power your Digitrax accessories with the reliable and efficient Digitrax PS14 AC/DC Adapter. Designed to provide a stable power supply, the PS14 is perfect for a wide range of Digitrax products, ensuring your model train setup runs smoothly and efficiently. Key Features: Versatile Power Supply: The PS14 provides 14V DC at 300ma, making it suitable for powering various Digitrax accessories such as the UP5, BDL168, DS64, SE8C, LNRP, UR90, UR91, UR92, and more. Universal AC Input: With an input range of 95-240V AC at 50/60Hz, the PS14 can be used worldwide, making it a versatile choice for model train enthusiasts everywhere. Compact and Lightweight: Weighing only 2 ounces, the PS14 is easy to handle and install. Its compact design ensures it fits neatly on a plug strip without taking up too much space. Stabilized Output: The PS14 provides a stabilized output, ensuring consistent performance and protecting your accessories from power fluctuations. Convenient Cable Length: The approximately 4-foot long cable offers flexibility in placement, allowing you to position your accessories exactly where you need them. Right Angle Connector: The 2.1 mm center positive connector is designed with a right angle, making it easy to connect in tight spaces. Power Indicator: A red LED power indicator lets you know when the adapter is on and functioning correctly. Why Choose the Digitrax PS14? The Digitrax PS14 is not just an adapter; it’s a reliable power solution for your model train accessories. Whether you’re a hobbyist looking to enhance your setup or a professional seeking dependable components, the PS14 offers the perfect balance of performance, versatility, and ease of use. Applications: Model Train Accessories: Ideal for powering a variety of Digitrax accessories, ensuring your model train layout operates smoothly. DIY Projects: Suitable for various DIY electronics projects that require a stable 14V DC power supply. Custom Installations: Perfect for custom model train installations where reliable power is essential. Specifications: Output Voltage: 14V DC Current Rating: 300ma Input Voltage: 95-240V AC, 50/60Hz Connector: 2.1 mm center positive, right angle Cable Length: Approximately 4 feet Weight: 2 ounces Enhance Your Model Train Experience Upgrade your model train setup with the Digitrax PS14 AC/DC Adapter. Its reliable performance, versatile compatibility, and user-friendly design make it the perfect choice for anyone looking to power their Digitrax accessories efficiently. More Information Item # PS14 Brand Digitrax MSRP $16.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet

Read more less