Digitrax

The Digitrax UP7 LocoNet Universal Panel is the fascia-mounted plug-in point that turns a LocoNet layout into a true walkaround railroad. Mount one every few feet along the fascia and operators can plug in a throttle, walk with their train, and unplug at the far end without ever dropping the session. Two front throttle jacks, three more LocoNet jacks for daisy-chaining, optional throttle charging, and a Track Status LED make the UP7 the modern drop-in replacement for the long-running Digitrax UP5 panel. Looking for more DCC gear? Browse our DCC Accessories, DCC Wiring, and DCC Decoders. Features Two front-panel RJ12 throttle jacks so operators can plug in, unplug, and walk the layout without ever interrupting the LocoNet session. Three more RJ12 LocoNet jacks (two rear, one side) make daisy-chaining panels and routing LocoNet cable around the layout straightforward. Optional throttle charging for DT602 and UT6 throttles, with power sharing across up to six UP7 panels so batteries stay topped off between operating sessions. Track Status LED gives an at-a-glance check that the section is powered, which makes troubleshooting far quicker. Plug-and-play installation - fully connectorized, no soldering required. Cut a 2.6 x 1.7 inch fascia opening, fasten with four #6 screws, and plug it in. Direct replacement for the Digitrax UP5 with the same LocoNet compatibility and an updated design. Scale: All Scales (Z through G) - works with any LocoNet-equipped Digitrax command station. More Information Brand Digitrax Item Number UP7 Product Type LocoNet Universal Panel (DCC Fascia Panel) Scale All Scales (Z, N, HO, O, G) Front Throttle Jacks 2 x RJ12 Additional LocoNet Jacks 3 x RJ12 (2 rear, 1 side) for daisy-chaining Throttle Charging Optional - DT602 and UT6, requires external 12V DC supply Track Status LED Yes, bi-color Power Input 2mm jack, 12V DC (Digitrax PS14 recommended) Cable Type 6-conductor flat cable with RJ12 6-pin connectors Fascia Cutout Approx. 2.6 in. W x 1.7 in. H, four #6 screws Replaces Digitrax UP5 Condition New UPC 625667110123 FAQ Will the UP7 work with my Digitrax system?Yes. Any Digitrax command station or booster with a LocoNet port works, including the Zephyr Express, DCS210+, DCS240+ and older LocoNet systems. Plug it in with standard LocoNet cable and it is ready to use. Do I need a power supply for it?Not for normal operation - LocoNet runs the panel on its own. Add a 12V DC supply such as the Digitrax PS14 only if you want the panel to charge DT602 or UT6 throttles while LocoNet is asleep. Can I use the UP7 to replace a UP5?Yes. The UP7 is the direct successor to the UP5 with the same LocoNet function, so it is the normal upgrade path for existing panels. How many panels does a layout need?Most operators mount one every 6 to 10 feet of fascia so a throttle jack is never more than a few steps away as you follow your train. What cable does it use?Standard 6-conductor flat LocoNet cable with RJ12 6-pin connectors - the same cable used throughout a Digitrax LocoNet layout.

Read more less

Upgrade your model trains with the Digitrax SDXH167D series 7 sound decoder for HO Scale. Expertly designed with advanced technology, this decoder delivers clear and realistic sound effects for an immersive experience. Enjoy precise control and enhanced functionality with this top-notch decoder. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm 16 x 26 x 9mm Box Speaker 300uF Capacitor More Information Item # SDXH167D Brand Digitrax Scale HO Scale MSRP $59.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax DT602 Advanced Super Throttle gives you direct control of up to two locomotives at a time with all the advanced power features and flexibility serious model railroaders demand. Designed to handle nearly every aspect of layout control, this throttle brings precision, reliability, and simplicity to your DCC experience. Works with all compatible LocoNet systems Color 2.4” LCD Display Screen Advanced menu system and scrolling help Soft ON/OFF switch with zero off power-drain Improved wireless battery operation and extended life Operates on 3 AA cells or rechargeable batteries Available in standard tethered or Radio Duplex versions Control up to 29 functions (F0–F28) Run two locomotives simultaneously with dual encoders Supports turnout and stationary decoder control Over 9,000 locomotive addresses supported Simplified 2- or 4-digit addressing setup Advanced Route editing and recall functions Infrared compatibility and easy wireless upgrade path More Information Brand: Digitrax Product Type: DCC Throttle Scale Compatibility: HO & N Scale Model: DT602 Advanced Super Throttle MSRP: $200.00 Item #: DT602 Condition: New Availability: Ships same or next business day Warranty: No Worries Warranty Made In: USA Looking for the wireless Duplex version? Check out the Digitrax DT602D Advanced Duplex Super Throttle for full radio control freedom. Explore more Digitrax products for your layout. Frequently Asked Questions Can this throttle work with other DCC systems? Yes, it works with any LocoNet compatible DCC system. Does it require special batteries? No, it runs on standard or rechargeable AA batteries. Is it compatible with wireless operation? Yes, you can use infrared or upgrade to Duplex Radio using UR92 modules. How many locomotives can I control? You can control two trains at once with full speed and direction control for each. What’s the main difference between DT602 and DT602D? The DT602D includes built-in Duplex Radio for wireless operation, while the DT602 uses a tethered or infrared setup.

Read more less

The Digitrax DH127P is the plug-and-play version of the Series 7 HO decoder: a 9-pin decoder already wired to an 8-pin NMRA medium plug on about 3.2 inches of harness. If your locomotive has a DCC-ready 8-pin socket, pull the dummy plug, drop this in, and you are running. The longer harness gives you room to route wires and tuck the decoder somewhere sensible. Building a DCC fleet? Browse our DCC Decoders, DCC Speakers, and DCC Accessories. Features 8-pin NMRA medium plug fitted on roughly 3.2 in. of harness - fits the great majority of DCC-ready HO locomotives with no soldering. 1.0 amp continuous, 2.0 amps peak - ample for single-motor HO diesels and steam. 2 FX7 function outputs at 200mA for directional headlights plus effects such as Mars light, ditch lights, rotary beacon and flicker. Series 7 platform with back-EMF speed stabilisation, so slow switching moves stay smooth and controlled. Longer harness than the DH127PS - easier routing, at the cost of more wire to tuck away in a tight shell. More Information Brand Digitrax Item Number DH127P Product Type DCC Mobile Decoder Scale HO Motor Current 1.0 A continuous / 2.0 A peak Function Outputs 2 x FX7, 200 mA Connection 9-pin socket with P-harness, 8-pin medium plug Harness Length Approx. 3.2 in. Series Digitrax Series 7 Sound No - motor and function decoder only Condition New FAQ DH127P or DH127PS - which one do I want?Same decoder, different harness length. The DH127P has about 3.2 in. of wire, which is easier to route in a roomy diesel hood. The DH127PS has about 1.2 in., which is the better choice when the socket sits right where the decoder has to go. Will it fit my locomotive?If the loco is advertised as DCC-ready with an 8-pin NMRA socket, yes. Pull the dummy plug out of the socket, keep it somewhere safe, and plug the decoder in with pin 1 lined up to the marked corner. Does it have sound?No. This is a motor and function decoder. For sound in HO, look at a Digitrax SDXH series decoder or a SoundTraxx unit, plus a speaker. Do I need a Digitrax command station?No. It is a standard NMRA DCC decoder and will run and program on any DCC system.

Read more less

Power your Digitrax accessories with the reliable and efficient Digitrax PS14 AC/DC Adapter. Designed to provide a stable power supply, the PS14 is perfect for a wide range of Digitrax products, ensuring your model train setup runs smoothly and efficiently. Key Features: Versatile Power Supply: The PS14 provides 14V DC at 300ma, making it suitable for powering various Digitrax accessories such as the UP5, BDL168, DS64, SE8C, LNRP, UR90, UR91, UR92, and more. Universal AC Input: With an input range of 95-240V AC at 50/60Hz, the PS14 can be used worldwide, making it a versatile choice for model train enthusiasts everywhere. Compact and Lightweight: Weighing only 2 ounces, the PS14 is easy to handle and install. Its compact design ensures it fits neatly on a plug strip without taking up too much space. Stabilized Output: The PS14 provides a stabilized output, ensuring consistent performance and protecting your accessories from power fluctuations. Convenient Cable Length: The approximately 4-foot long cable offers flexibility in placement, allowing you to position your accessories exactly where you need them. Right Angle Connector: The 2.1 mm center positive connector is designed with a right angle, making it easy to connect in tight spaces. Power Indicator: A red LED power indicator lets you know when the adapter is on and functioning correctly. Why Choose the Digitrax PS14? The Digitrax PS14 is not just an adapter; it’s a reliable power solution for your model train accessories. Whether you’re a hobbyist looking to enhance your setup or a professional seeking dependable components, the PS14 offers the perfect balance of performance, versatility, and ease of use. Applications: Model Train Accessories: Ideal for powering a variety of Digitrax accessories, ensuring your model train layout operates smoothly. DIY Projects: Suitable for various DIY electronics projects that require a stable 14V DC power supply. Custom Installations: Perfect for custom model train installations where reliable power is essential. Specifications: Output Voltage: 14V DC Current Rating: 300ma Input Voltage: 95-240V AC, 50/60Hz Connector: 2.1 mm center positive, right angle Cable Length: Approximately 4 feet Weight: 2 ounces Enhance Your Model Train Experience Upgrade your model train setup with the Digitrax PS14 AC/DC Adapter. Its reliable performance, versatile compatibility, and user-friendly design make it the perfect choice for anyone looking to power their Digitrax accessories efficiently. More Information Item # PS14 Brand Digitrax MSRP $16.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet

Read more less

Increase your mobility with the Digitrax BP600MH battery pack for DT602 Series Throttles. Featuring a long-lasting rechargeable battery, this pack allows you to control your train layout without being tethered to an outlet. Say goodbye to cords and hello to convenience with the Digitrax BP600MH. Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works with DT602 Family of throttles. More Information Item # BP600MH Brand Digitrax Scale N/A MSRP $13.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

Efficiently manage and detect occupancy and transponding in 4 sub-districts with Digitrax PM74. This power manager is perfect for multiple scales and ensures a smooth and reliable operation. Trust in its advanced capabilities for a seamless experience. 4 Power Manager sub-districts. Upgraded replacement for PM42, fully encased. Fully connectorized installation. Each Power sub-district / Detection Section (DS) supports Auto-reverse or Short circuit management. Each DS supports Occupancy detection. Each DS supports Transponding detection. Allows Mainline CV Read/Write program of compatible decoders. Remote LED status support. Series7 style advanced installation support using DT602. Replaces PM42 Quad Power Manager. More Information Item # PM74 Brand Digitrax Scale Multi Scale MSRP $109.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax SDCK is the cable kit that gets signal connections from a signal decoder out to the masts without a rat's nest under the layout. You get 30 feet of 10-wire ribbon cable and eight 10-pin sockets - enough to build two complete signal driver cables - and you cut them to whatever length your benchwork actually needs, crimping a socket on wherever a signal goes. Signalling your layout? Browse our DCC Accessories, DCC Wiring, and the full Digitrax range. Features 30 ft of 10-wire signal driver ribbon cable plus eight 10-pin sockets - enough for two complete signal driver cables. Cut to your own lengths. Rather than buying fixed-length cables, you make each run the length the layout needs and put a socket exactly where the signal stands. Keeps the wiring tidy. All the signal connections travel together in one ribbon instead of a bundle of loose wires under the benchwork. Connects signal decoders to signal masts - the standard cabling method for Digitrax signal decoder installs. Works in any scale; the cable and sockets are the same regardless of the signal heads you are feeding. More Information Brand Digitrax Item Number SDCK Product Type Signal Driver Cable Kit Scale All scales Cable 30 ft, 10-conductor ribbon Sockets 8 x 10-pin Makes 2 complete signal driver cables Use With Digitrax signal decoders and signal mast bases Condition New FAQ What exactly is in the box?Thirty feet of 10-wire ribbon cable and eight 10-pin sockets. That is the raw material for two full signal driver cables, cut and terminated wherever your layout needs them. Do I need any special tools?The sockets are insulation-displacement type, so they press onto the ribbon cable. A small vice or a pair of smooth-jaw pliers will seat them; no soldering and no crimp tool needed. What else do I need for a signal install?A signal decoder to drive the aspects, signal masts or heads, and mounting hardware such as the SMBK mast base kit and SMHK mounting hardware kit to hold the plugs at the right height under the layout. Can I make the cables any length?Yes, that is the point of buying a kit rather than ready-made cables. Measure the run, cut, and press a socket on at each signal position.

Read more less

As an industry leader in model train control, the Digitrax DB220 offers a powerful and versatile option for your layout. With dual 3/5/8 amp auto-reversing capability and compatibility across multiple scales, this booster provides reliable and efficient power distribution for your DCC system. Dual 3/5/8 Amp AutoReversing DCC Booster Up to 16 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over temperature and short circuit protection Track status indicators Stabilized track drive output Over-voltage protected Auto-Shutdown when command control signal is lost to prevent “runaway” trains IPL updatable More Information Item # DB220 Brand Digitrax Scale Multi Scale MSRP $240.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet

Read more less

The Digitrax DSXC4 Input Interconnect Board is designed to simplify plug-and-play connectivity for the Digitrax DS74 Quad Switch Stationary Decoder. It provides a reliable way to connect DS74 inputs with fascia controls or BD4N detectors, improving layout wiring and accessory control setup. Input interconnect board for DS74 stationary decoder Plug-and-play connection with included ribbon cable Connects up to four DSXC1 fascia controls Direct ribbon cable header for BD4N detector compatibility 8-pin screw terminal plug for optional wire access to all input lines Compact and easy-to-install design More Information Brand Digitrax Type Input Interconnect Board Scale Multi Scale Model DSXC4 MSRP $16.00 Item # DSXC4 Made In USA Ships Same or next business day Manual Download DSXC4 Instruction Sheet (PDF) Pair it with the Digitrax DS74 Quad Switch Stationary Decoder for seamless accessory control on your layout. Frequently Asked Questions Q: Does this board come with a ribbon cable?A: Yes, it includes the ribbon cable for DS74 input connection. Q: Can I use it without the fascia controls?A: Yes, it supports optional 8-pin screw terminals for custom wiring. Q: Is this compatible with other Digitrax products?A: It works with DS74, DSXC1 fascia controls, and BD4N detectors. Q: Do I need special tools to install it?A: No, it’s plug-and-play for easy setup. Q: Is this part covered by Digitrax warranty?A: Yes, all Digitrax electronics include manufacturer warranty coverage.

Read more less

This Digitrax STAW Stow Away Throttle Holder is the perfect solution for storing and organizing your throttle controls. With its compact design and easy installation, it allows for efficient use of space and quick access to your throttles. Keep your workspace clutter-free and your throttles within reach with this 1 pack stow away holder. Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day Warranty On Materials & Workmanship Only. More Information Item # STAW Brand Digitrax Warranty No Worries Warranty (read more) MSRP $14.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax DHWHP harness is expertly designed to connect your 9-pin locomotive to a DCC medium plug, allowing for seamless and efficient communication. With a generous 3-inch length, this harness provides flexibility and easy installation. Upgrade your locomotive's performance with this high-quality harness. More Information Item # DHWHP  Brand Digitrax  MSRP $8.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet, Decoder Manual V1, Decoder Manual V2, Specification Sheet

Read more less